GB/T 20222-2025 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20222-2025: General technical requirements of anti-copying technical products Status: Valid GB/T 20222: Historical versions
Basic dataStandard ID: GB/T 20222-2025 (GB/T20222-2025)Description (Translated English): General technical requirements of anti-copying technical products Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A90 Classification of International Standard: 13.310 Word Count Estimation: 10,119 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 20222-2006 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 20222-2025: General technical requirements of anti-copying technical products---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20222-2025ICS 13.310 CCSA90 National Standard of the People's Republic of China Replaces GB/T 20222-2006 General technical requirements for anti-copying technology products Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Categories 2 5.Requirement 2 6 Test Method 2 7 Result Assessment 3 Appendix A (Informative) Copying Effect Rating of Anti-copying Technology Products 5 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 20222-2006 "General Technical Requirements for Anti-copying Products". Compared with GB/T 20222-2006, In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) “Classification” has been changed (see Chapter 4, Chapter 4 of the.2006 edition); b) “Requirements” has been changed (see Chapter 5, Chapter 5 of the.2006 edition); c) The “Test Methods” has been changed (see Chapter 6, Chapter 6 of the.2006 edition); d) “Result Assessment” has been modified (see Chapter 7, Chapter 7 of the.2006 edition); e) "Testing Rules" has been deleted (see Chapter 8 of the.2006 edition); f) Deleted “Appendix AE Sight Sign Structure” (see Appendix A of the.2006 edition); g) Deleted “Appendix B Method for Preparing E-Shaped Visual Chart for Anti-copying Test Sample” (see Appendix B of the.2006 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Anti-Counterfeiting Standardization Technical Committee (SAC/TC218). This document was drafted by. China Banknote Printing Technology Research Institute Co., Ltd., China Banknote Printing Ink Co., Ltd., Juwang Technology Co., Ltd., and Zhongchuang Printing (Beijing) Technology Development Co., Ltd., Shanghai Anquan Printing Co., Ltd., Laiyang Yintong Paper Co., Ltd., Weihai Hualing Optoelectronics Co., Ltd. Company, Guizhou Province Renhuai Shenren Packaging Printing Co., Ltd., Shanghai Anti-Counterfeiting Technology Product Evaluation Center, Beijing Metrology and Testing Science Research Institute Research Institute, China Institute of Metrology, China National Institute of Testing and Certification Co., Ltd. (Beijing), and Beijing Technology and Business University. The main drafters of this document are. Zhang Jian, Zhou Ying, Lu Jibing, Hu Shangwei, Wang Changzheng, Jiang Jun, Sang Haiming, Zhang Mingyang, Wang Hui, Li Yuxin, Yang Xiuju, Li Bo, Wang Yongsheng, Huang Tiexiang, Zuo Jiyuan, Xin Xiulan, Qi Xin, Wang Jing, Lei Qiuxia, and Lü Miaojing. The previous versions of this document and the documents it replaces are as follows. ---First published in.2006 as GB/T 20222-2006; ---This is the first revision. General technical requirements for anti-copying technology products 1 Scope This document specifies the classification, requirements, and results assessment methods for anti-copying technology products and describes the corresponding test methods. This document applies to identification technology products that utilize anti-copy materials, anti-copy pattern designs, and photocopy-detection capabilities under visible light conditions. 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 19437 Printing technology - Spectral measurement and colorimetric calculation of printed images GB/T 29793-2013 Color copying (including multi-function) equipment 3 Terms and Definitions The following terms and definitions apply to this document. 3.1 anti-copying Prevent imitation and reproduction by photocopying. 3.2 Anti-copying techniques Technology that prevents copying and duplication by photocopying. 3.3 Products with anti-copying function made by using anti-copying technology (3.2) for the purpose of preventing copying. 3.4 original Objects used for copying. 3.5 copying device copyingdevice Equipment used to recreate or restore an original (3.4). Note. Such as copiers, multi-function printers, etc. 3.6 copy A copy of the original (3.4). 3.7 Anti-copying effect After the anti-copying technology (3.2) is applied, the original document is protected from being copied and reproduced by copying. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20222-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 20222-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20222-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20222-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20222-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20222-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
