GB/T 20119-2023 English PDFUS$729.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20119-2023: Steel wire ropes for balance Status: Valid GB/T 20119: Historical versions
Basic dataStandard ID: GB/T 20119-2023 (GB/T20119-2023)Description (Translated English): Steel wire ropes for balance Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H49 Classification of International Standard: 77.140.65 Word Count Estimation: 38,375 Date of Issue: 2023-09-07 Date of Implementation: 2024-04-01 Older Standard (superseded by this standard): GB/T 20119-2006 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 20119-2023: Steel wire ropes for balance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 77.140.65 CCSH49 National Standards of People's Republic of China Replace GB/T 20119-2006 Balancing wire rope Published on 2023-09-07 2024-04-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Category 1 5 Order contents 4 6 Materials 4 7 Technical requirements 5 8 Inspection and test methods 13 9 Qualification conditions15 10 Acceptance16 11 Safety, use and maintenance 16 12 Packaging, logo and quality certificate 16 Appendix A (normative) Steel wire rope mechanical properties table 17ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 20119-2006 "Flat Steel Wire Rope for Balancing". Compared with GB/T 20119-2006, except for structural adjustment and compilation In addition to editorial changes, the main technical changes are as follows. ---Added 18 round steel wire rope structures such as 18×7, 34(M)×7, 30×P6-6×19M and PDCR8×[4×12M], etc. 2 flat wire rope structures (see Chapter 4); --- Added corresponding technical requirements such as the nominal diameter of structural steel wire ropes such as 18×7, 34(M)×7, PDCR8×[4×12M] (see Chapter 7); ---Increased the weight coefficients of 18×19, 34(M)×19, 35(W)×7 and other categories of steel wire ropes (see Table 5); ---Added the reference weight of the flat steel wire rope after oiling (see 7.6.2, Table A.10); --- Added conditions for judging the qualification of round steel wire rope split wires (see 9.1). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the China Iron and Steel Industry Association. This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). This document was drafted by. Angang Steel Wire Rope Co., Ltd., Shandong Shubote Wire Rope Co., Ltd., Tianjin Goldsheng Wire Rope Co., Ltd., Guizhou Steel Rope Co., Ltd., Jiangsu Songcheng Industrial Development Co., Ltd., Ningxia Hengli Steel Wire Rope Co., Ltd., Metallurgical Industry Information Standard Research Institute Institute. The main drafters of this document. Zhao Xianhai, Zhang Dan, Wang Lingjun, Ren Cuiying, Chen Ruiyun, Du Jinhua, Yu Keyong, Zhang Chengyu, Wang Xiaozhu, Hu Qingang, Wang Haiqiang, Gang Shaoke, Chen Yansong, Leng Mingjian, Chu Xinsheng, Liu Yan, Wu Li, Ding Junshan, Su Diyao, Wang Yong. This document was first published in.2006 and this is the first revision. Balancing wire rope1 ScopeThis document specifies the classification, ordering content, materials, technical requirements, inspection and testing methods of balancing wire ropes (hereinafter referred to as "wire ropes"). Laws, qualification conditions, acceptance, safety, use and maintenance, packaging, marking and quality certificates. This document applies to round wire ropes and flat wire ropes used for balancing in coal, metal, non-metal and other mines.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 228.1 Tensile testing of metallic materials Part 1.Room temperature test method GB/T 238 Test method for repeated bending of metallic material wires GB/T 239.1 Metallic material wires Part 1.Unidirectional torsion test method GB/T 2104 General provisions for packaging, marking and quality certificates of wire ropes GB/T 8358 Method for determination of actual breaking tension of steel wire ropes GB/T 8706 Wire rope terminology, marking and classification GB/T 21965 Wire rope acceptance and defect terminology GB/T 29086 Safe use and maintenance of wire ropes NB/SH/T 0387 Grease for wire rope NB/SH/T 6019 Friction hoist wire rope grease and maintenance oil YB/T 081 Numerical rounding of metallurgical technical standards and determination of test values YB/T 4452 Steel wire rope fiber core YB/T 5343 Round steel wire for rope making YB/T 5357 Steel wire and its products zinc or zinc-aluminum alloy coating3 Terms and definitionsThe terms and definitions defined in GB/T 8706 apply to this document.4 categories4.1 Steel wire ropes shall comply with the requirements of GB/T 8706 according to structural classification, see Table 1.If the purchaser does not clearly propose the specific structure of the steel wire rope, it can be determined by The manufacturer determines itself within the same group in Table 1. 4.2 According to the twisting type and twisting direction, round steel wire ropes are divided into two types. right alternating twisting and left alternating twisting, as shown in Figure 1a) and Figure 1b). Among them, Table 1 The inner rope twisting method of the multi-layer stranded steel wire ropes in Group 4 to Group 9 shall be determined by the manufacturer. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20119-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 20119-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20119-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20119-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20119-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20119-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
