GB/T 19960-2024 English PDFUS$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19960-2024: Wind energy generation systems - General technical specification and test method of wind turbines Status: Valid GB/T 19960: Historical versions
Basic dataStandard ID: GB/T 19960-2024 (GB/T19960-2024)Description (Translated English): Wind energy generation systems - General technical specification and test method of wind turbines Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: F11 Classification of International Standard: 27.180 Word Count Estimation: 26,218 Date of Issue: 2024-04-25 Date of Implementation: 2024-11-01 Older Standard (superseded by this standard): GB/T 19960.1-2005; GB/T 19960.2-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19960-2024: Wind energy generation systems - General technical specification and test method of wind turbines---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 27:180 CCSF11 National Standards of People's Republic of China Replaces GB/T 19960:1-2005, GB/T 19960:2-2005 Wind power generation system wind turbine general Technical conditions and test methods Released on 2024-04-25 2024-11-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and definitions 3 4 General technical requirements for units 3 5 Technical requirements for unit components and systems 5 6 Test methods 11 7 Inspection Rules 14 8 Markings, labels, instructions for use 15 9 Packaging, transportation and storage 16 10 Others16 Appendix A (Informative) Test report format and content 17 Reference 18ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 19960:1-2005 "Wind turbines - Part 1: General technical requirements" and GB/T 19960:2- 2005 Wind turbine generator systems Part 2: General test methods: Similar to GB/T 19960:1-2005 and GB/T 19960:2-2005 In addition to structural adjustments and editorial changes, the main technical changes are as follows: --- Changed the scope of application (see Chapter 1, Chapter 1 of GB/T 19960:1-2005 and GB/T 19960:2-2005); --- Changed the terms and definitions (see Chapter 3, Chapter 3 of GB/T 19960:1-2005); --- Changed the general technical requirements for units (see Chapter 4, Chapter 4 of GB/T 19960:1-2005); --- Changed the technical requirements for unit components and systems (see Chapter 5, Chapter 5 of GB/T 19960:1-2005); --- The test method has been changed, the test conditions have been refined, and the test content and methods have been changed (see Chapter 6, GB/T 19960:2-2005 Chapters 3, 4, and 5 of the ); --- Changed the inspection rules (see Chapter 7, Chapter 7 of GB/T 19960:1-2005); --- Changed the signs, labels and instructions for use (see Chapter 8, Chapter 8 of GB/T 19960:1-2005); --- Changed packaging, transportation and storage (see Chapter 9, Chapter 9 of GB/T 19960:1-2005); --- Deleted the product quality assurance period (see Chapter 10 of GB/T 19960:1-2005): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the China Machinery Industry Federation: This document is under the jurisdiction of the National Technical Committee for Standardization of Wind Power Generation (SAC/TC50): This document was drafted by: Windey Energy Technology Group Co:, Ltd:, Beijing Goldwind Technology Wind Power Equipment Co:, Ltd:, Harbin Electric Wind Energy Co:, Ltd: Co:, Ltd:, CRRC Shandong Wind Power Co:, Ltd:, CSSC Haizhuang Wind Power Co:, Ltd:, Shanghai Electric Wind Power Group Co:, Ltd:, Mingyang Smart Energy Yuanyuan Group Co:, Ltd:, Shanxi Tianbao Group Co:, Ltd:, Siemens Gamesa Renewable Energy Technology (China) Co:, Ltd:, Beijing Jianheng Certification Certification Center Co:, Ltd:, Guodian United Power Technology Co:, Ltd:, China Quality Certification Center, China Electric Power Research Institute Co:, Ltd:, Weiss Tas Wind Technology (China) Co:, Ltd: Beijing Branch, China Three Gorges Corporation, CGN Wind Power Co:, Ltd:, State Grid Shaanxi Electric Power Research Institute of Xi'an Electric Power Co:, Ltd:, China Huaneng Group Clean Energy Technology Research Institute Co:, Ltd:, Nanjing High Speed Gear Manufacturing Co:, Ltd: Ltd:, Sinoma Wind Blade Co:, Ltd:, Zhejiang University, Zhuzhou Times New Materials Technology Co:, Ltd:, Yinchuan Weili Transmission Technology Co:, Ltd:, Huaneng Shanwei Wind Power Co:, Ltd:, Chongqing University, Tianshun Wind Energy (Suzhou) Co:, Ltd:, Xiamen Shuangruifeng ELECTRIC TECHNOLOGY CO:, LTD: The main drafters of this document are: Yang Fan, Luo Yongshui, Xie Shengqing, Song Xiaoping, Li Gangqiang, Zhang Wanjun, Zhang Liming, Zhang Qiying, Hu Dawei, Li Yue, Yang Hongyuan, Zhao Haiyan, Yu Qingqing, Liu Weichao, Kang Wei, Fu Deyi, Wang Wenyue, Sun Jie, Ma Li, Ma Chi, Li Hua, Jin Qiang, Zhang Hechao, Li Chengliang, Wu Lijian, Ren Jing, Feng Xuebin, Li Xiang, Wu Xurui, Zeng Xingguo, Zou Libing, Zhou Hao, Zhang Linzhong, Chen Qiang, Gong Lice, Yuan Ying, Li Peng, Zhang Yuxia, Zhang Linwei, Tang Peng, Zhang Jianjun, Zhang Youjie, Wu Shuang, Zhang Yanling, and Wang Liliang: The previous versions of the documents replaced by this document are as follows: ---GB/T 19960:1, first issued in:2005; ---GB/T 19960:2, first issued in:2005: Wind power generation system wind turbine general Technical conditions and test methods1 ScopeThis document specifies the general technical requirements, test methods, inspection rules, marking, labeling, use and maintenance of wind turbines and their components and systems: Instructions for use, packaging, transportation, storage, etc: This document applies to large horizontal axis grid-connected wind turbines (hereinafter referred to as “units”):2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 311:1 Insulation coordination Part 1: Definitions, principles and rules GB/T 997 Classification of structural types, installation types and terminal box positions of rotating electrical machines (IM code) GB/T 1094:16 Power transformers Part 16: Transformers for wind power generation GB/T 2900:53 Electrical terminology Wind turbine generator system GB/T 3906 3:6kV~40:5kV AC metal-enclosed switchgear and control equipment GB 4715 Point-type smoke detectors GB 4716 Point-type heat-sensing fire detector GB 4717 Fire alarm controller GB/T 4942 Protection degree of rotating electrical machine integral structure (IP code) Classification GB/T 5226:1 Electrical safety of machinery Electrical equipment of machinery Part 1: General technical requirements GB 5226:3 Safety of machinery - Electrical equipment of machinery - Part 11: Voltages above 1000Va:c: or 1500Vd:c: but not exceeding Technical conditions for 36kV high voltage equipment GB/T 6404:1 Acceptance specification for gear units Part 1: Test specification for airborne noise GB/T 6404:2 Acceptance specification for gear units Part 2: Determination of mechanical vibration of gear units during acceptance tests GB/T 9969 General principles for instructions for use of industrial products GB/T 11022 Common technical requirements for high voltage AC switchgear and controlgear standards GB 16806 Fire linkage control system GB/T 17626:1 Electromagnetic compatibility test and measurement technology - General introduction to immunity test GB/T 17626:2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test GB/T 17626:3 Electromagnetic compatibility test and measurement technology Radio frequency electromagnetic field radiation immunity test GB/T 17626:4 Electromagnetic compatibility test and measurement technology Electrical fast transient pulse group immunity test GB/T 17626:5 Electromagnetic compatibility test and measurement technology Surge (impact) immunity test GB/T 17626:6 Electromagnetic compatibility test and measurement technology - Immunity to conducted disturbances induced by radio frequency fields GB/T 17626:12 Electromagnetic compatibility test and measurement technology Part 12: Ringing wave immunity test GB/T 17626:18 Electromagnetic compatibility test and measurement technology Damped oscillation wave immunity test GB/T 18380:35 Fire tests for electric and optical cables under fire conditions Part 35: Fire tests for vertically mounted bundled wires and cables ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19960-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 19960-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19960-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19960-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 19960-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19960-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
