GB/T 19520.20-2023 English PDFUS$474.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19520.20-2023: Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units Status: Valid
Basic dataStandard ID: GB/T 19520.20-2023 (GB/T19520.20-2023)Description (Translated English): Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K05 Classification of International Standard: 31.240 Word Count Estimation: 26,218 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19520.20-2023: Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 31:240 CCSK05 National Standards of People's Republic of China Electrical and electronic equipment mechanical structures 482:6mm (19in) series mechanical structure dimensions Part 3-108: Dimensions of Type R sub-boxes and inserts Part 3-108:DimensionsofR-typesubracksandplug-inunits Part 3-108:DimensionsofR-typesubracksandplug-inunits,IDT) Published on 2023-11-27 and implemented on 2024-06-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Layout overview 2 5 RA type plug-in box 3 5:1 General 3 5:2 RA type sub-box rear installation dimensions 5 6 RB type plug-in box 5 6:1 General 5 6:2 RB type plug-in box rear installation dimensions 6 7 R type plug-in box guide rail 7 8 Electromagnetic shielding structure and mounting flange 8 9 Integrated chassis 9 9:1 General 9 9:2 RA-C type chassis/socket 9 9:3 RB-C type chassis/socket 10 10 Panel/plug-in adapted to RA type plug-in box 11 11 Panel/plug-in adapted to RB type plug-in box 12 12 Plug/pull handle 13 13 PCB size 13 14 size 14 15 Nomenclature of datum symbols and dimensions in drawings15 15:1 Datum plane (shown as a box in the figure) 15 15:2 Dimension 15 in the picture Appendix A (Normative) Installation Bracket 16 Appendix B (Normative) Environmental Test 17 Appendix C (Normative) Thermal Management 18 Appendix D (informative) Comparison between IEC 60297-3-101 and this document 19 Reference 20ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 3-108 of GB/T 19520: GB/T 19520 has published the following parts: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-100: panels, plug-in boxes, chassis, Basic dimensions of racks and cabinets; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-101: plug-in boxes and plug-ins; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-102: plug handle; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-103: Coding keys and positioning pins; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-104: Connector-based plug-in box and plug-in interface dimensions; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-105: 1U height chassis dimensions size and design requirements; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-106: Applicable to compliance with IEC 60917-2-1 Adaptable dimensions for plug-in boxes and chassis in metric cabinets or racks; ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-107: Miniaturized plug-in boxes and plug-ins size of; --- Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-108: R-type plug-in box and Dimensions of the plug-in; --- Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-109: Embedded computing The chassis size of the device; ---Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-110: for smart houses Residential racks and cabinets: This document is equivalent to IEC 60297-3-108:2014 "Electronic Equipment Mechanical Structure 482:6mm (19in) Series Mechanical Structure Ruler" Part 3-108: Dimensions of Type R sub-boxes and plug-ins: This document has made the following minimal editorial changes: ---In order to coordinate with the existing standards, the standard name is changed to "Electrical and electronic equipment mechanical structure 482:6mm (19in) series machinery Structural Dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed and coordinated by the National Technical Committee on Comprehensive Standardization of Electrical and Electronic Equipment Structures (SAC/TC34): This document was drafted by: Wankong Intelligent Manufacturing Co:, Ltd:, Beijing Institute of Electrical Technology and Economics of Machinery Industry, Jiangsu Qunling Energy Technology Co:, Ltd:, Beijing Sifang Relay Engineering Technology Co:, Ltd:, Xiamen Kunjin Electronic Technology Co:, Ltd:, Guangdong Dangjia Intelligent Electrical Co:, Ltd: Company, the 36th Research Institute of China Electronics Technology Group Corporation, ZTE Corporation, FiberHome Communications Technology Co:, Ltd:, Guodian Nanjing Automation Co:, Ltd:, Nanjing Nari Relay Protection Electric Co:, Ltd:, Nanyang Electric Group Co:, Ltd:, Shenzhen Ruiyang Innovation Technology Co:, Ltd:, Qingdao Xinanqu Refractory Materials Co:, Ltd:, Guangdong Feicheng New Materials Co:, Ltd:, Zhejiang Rujing Technology Co:, Ltd:, Yiwu City Jinglong Mold Co:, Ltd:, Guangdong Chengxing Testing Co:, Ltd:, Guangdong Limai Testing Technology Co:, Ltd:, China Electrical Equipment Industry Association: The main drafters of this document: Mu Linsen, Li Jianxia, Jiang Zhongyao, Han Zaolin, Jin Dayuan, Huang Shufu, Jiang Huixing, Wang Wei, Cui Yu, Bao Anqun, Yin Donghai, Li Zhengqing, Tang Jianqiang, Hu Kuolei, Duan Chunfang, Xiao Benchong, Gong Lihua, Wang Shanshan, Ni Qingqing, Huang Guanglin:IntroductionThe mechanical structure of electrical and electronic equipment is an important part of electrical and electronic equipment: To realize and improve electrical and electronic equipment Functional elements such as versatility, interchangeability and reliability, GB/T 19520 regulates the dimensions and interfaces of mechanical structures of electrical and electronic equipment: Regulation: The main problems it solves are: ---Specify the basic dimensions of panels, sub-boxes, chassis, racks and cabinets; ---Specify the basic size relationship between the plug-in box and the plug-in; ---Specify the dimensions and interfaces of accessories such as puller handles, coding keys, positioning pins, etc:; ---Specify the interface dimensions related to plug-in boxes, plug-ins and connectors; ---Specify the dimensions of 1U height chassis, miniaturized plug-ins and plug-ins, R-type plug-ins and plug-ins, and chassis of embedded computing equipment; ---Specifies the dimensions of residential racks and cabinets for smart homes: GB/T 19520 is a series of dimensional standards for the mechanical structure of electrical and electronic equipment, and is intended to consist of 11 parts: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-100: panels, plug-in boxes, chassis, Basic dimensions of racks and cabinets: The purpose is to specify 482:6mm (19in) series panels, plug-in boxes, chassis, racks and cabinets basic size: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-101: plug-in boxes and their plug-ins: Head The purpose is to stipulate the basic dimensional relationship of the 482:6mm (19in) series plug-in boxes and their plug-ins to ensure their interchangeability: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-102: Plug and puller handle: Purpose It specifies the size of the puller handle for use with the 482:6mm (19in) series subracks and plug-ins: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-103: Coding keys and positioning pins: The purpose is to specify the interface dimensions of coding keys and locating pins for use with 482:6mm (19in) series subracks and inserts: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-104: Connector-based plug-in box and plug-in interface dimensions: The purpose is to specify the interface dimensions related to the 482:6mm (19in) series of plug-in boxes and plug-ins and connectors: The relationship between the size and the installation spacing of the plug-in box and the printed board type plug-in and the backplane: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-105: 1U height chassis dimensions size and design requirements: The purpose is to specify the dimensions and dimensions of a 1U height chassis installed on a 482:6mm (19in) rack or cabinet: Carrying weight and installation method: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-106: Applicable to compliance with IEC 60917-2-1 Adaptable dimensions for plug-in boxes and chassis in metric cabinets or racks: Intended for installation in metric cabinets or The 482:6mm (19in) plug-in box of the rack and the flange mounting dimensions of the chassis: ---Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-107: Miniaturized plug-in boxes and plug-ins size of: The purpose is to standardize the use of connectors and other connectors specified by PICMGMicroTCA:0 and IEC 61076-4-116 Dimensions of miniaturized jacks and plug-ins for two-piece connectors and their interface dimensions: --- Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-108: R-type plug-in box and The size of the plug-in: The purpose is to specify the specifications of R-type sub-boxes and plug-ins (reinforced sub-boxes and plug-ins) that can be used in harsh environments: size: --- Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-109: Embedded computing The device's chassis size: The purpose is to specify the dimensions and physical properties of embedded computing device chassis and their printed boards: ---Electrical and electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-110: for smart houses Residential racks and cabinets: The purpose is to specify the dimensions, installation specifications, environmental requirements and safety of residential racks and cabinets for smart homes: All requirements: This document establishes alternative dimensions and characteristics for sub-boxes and their plug-ins by comparison with IEC 60297-3-101: These alternatives are For a stronger design of the load-bearing parts of the plug-in box: The plug-in has positioning pins and is fastened with M3 screws: Integrated chassis is also included in this article part of the package to optimize thermal management performance: Electrical and electronic equipment mechanical structures 482:6mm (19in) series mechanical structure dimensions Part 3-108: Dimensions of Type R sub-boxes and inserts1 ScopeThis document specifies the dimensions and characteristics of type R sub-boxes and plug-ins: R-type plug-in box and plug-in, namely 482:6mm (19in) series mechanical junction Ruggedized versions with enhanced vibration and shock resistance and/or improved electromagnetic compatibility (EMC) performance for use in more severe environments: This results in a plug-in box standard that is externally compatible with IEC 60297-3-100 but internally basically incompatible with IEC 60297-3-101: and Compared with IEC 60297-3-101 (the test configuration and load regulations are selected from IEC 61587-1 and IEC 61587-5), R-type plug-in box, integrated chassis And the dimensions and features covered by the plug-in reflect a higher level of ruggedness:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: IEC 60297-3-100 Mechanical structure of electronic equipment 482:6mm (19in) series mechanical structure dimensions Part 3-100: Surface panels,subracks,chassis,racksandcabinets] Note: GB/T 19520:16-2015 Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-100: panels, plug-in boxes, Basic dimensions of chassis, racks and cabinets (IEC 60297-3-100:2008, IDT) IEC 60297-3-101 Mechanical structure of electronic equipment 482:6mm (19in) series mechanical structure dimensions Part 3-101: Plug-in box Note: GB/T 19520:12-2009 Electronic equipment mechanical structure 482:6mm (19in) series mechanical structural dimensions Part 3-101: Plug-in box and its plug-in (IEC 60297-3-101:2004, IDT) IEC 60297-3-105 Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-105: 1U Note: GB/T 19520:17-2010 Electronic equipment mechanical structure 482:6mm (19in) series mechanical structure dimensions Part 3-105: 1U height machine Box size and design requirements (IEC 60297-3-105:2008, IDT) IEC 61587-1 Mechanical construction of electrical and electronic equipment Tests of the IEC 60917 and IEC 60297 series Part 1: Environment Note: GB/T 18663:1-2008 Tests for metric series and inch series of mechanical structures of electronic equipment Part 1: Cabinets, racks, plug-in boxes and chassis Climatic, mechanical testing and safety requirements (IEC 61587-1:2007, IDT) IEC 61587-3 Tests for mechanical structures of electronic equipment IEC 60917 and IEC 60297 Part 3: Electrical testing of cabinets and sub-boxes ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19520.20-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 19520.20-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19520.20-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19520.20-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
