GB/T 19436.2-2013 English PDF

US$734.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19436.2-2013: Electrical safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
Status: Valid

GB/T 19436.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19436.2-2013	734	Add to Cart	3 days	Electrical safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)	Valid
GB/T 19436.2-2004	799	Add to Cart	3 days	Mechanical electrical safety electro-sensitive protective devices -- Part 2: Particular requirements for equipment using active optoelectronic protective devices (AOPDs)	Obsolete

Similar standards

GB/T 19670   GB/T 18717.2   GB/T 18717.1   GB/T 20850   GB/T 19436.4   GB/T 19436.1   

Basic data

Standard ID: GB/T 19436.2-2013 (GB/T19436.2-2013)
Description (Translated English): Electrical safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J09
Classification of International Standard: 21.010
Word Count Estimation: 37,310
Older Standard (superseded by this standard): GB/T 19436.2-2004
Quoted Standard: GB/T 19436.1-2013; ISO 13855-2002; IEC 60825-1-2001; IEC/TS 62046-2008; EN 471-2003
Adopted Standard: IEC 61496-2-2006; IDT
Regulation (derived from): National Standards Bulletin No. 21 of 2013
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies: As a special design part of safety-related systems, sensitive equipment using active optoelectronic protective function, (AOPDs), used to detect human electro-sensitive protective equipment (ESPE) design, manufacture and testing P

GB/T 19436.2-2013: Electrical safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical safety of machinery Electro-sensitive protective equipment Part 2. Particular requirments for equipment using active opto-electronic protective devices (AOPDs) ICS 21.010 J09 National Standards of People's Republic of China Replacing GB/T 19436.2-2004 Electrical safety of machinery - Electro - sensitive protective equipment Part 2. Using active optoelectronic protective devices Particular requirements (AOPDs) equipment Part 2. Particularrequirementsforequipmentusingactiveopto-electronic protectivedevices (AOPDs) (IEC 61496-2.2006, Safetyofmachinery-Electro-sensitiveprotective equipment-Part 2. Particularrequirementsforequipmentusingactive opto-electronicprotectivedevices (AOPDs), IDT) Issued on. 2014-02-01 2013-10-10 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 function, design and environmental requirements 2 4.1 Functional requirements 2 4.2 Design Requirements 5 4.3 Environmental Requirements 6 5 Test 6 5.1 General 6 5.2 Functional Test 7 12 5.4 Environmental Testing 6 identification and safety signs 19 6.1 General 19 7 random file 20 Appendix A (Normative Appendix) ESPE optional feature 21 A.9 shield 21 Single fault in Appendix B (normative) Influence ESPE electrical equipment list 22 Annex C (informative) Conformity Assessment 23 Annex D (normative) method using a prism to verify the effective aperture angle 24 D.1 General 24 D.2 prism test step 24 Appendix E (normative) method using mirrors and optical properties deviate from the experimental verification 28 E.1 inappropriate reflection of the positive and external protection 28 When E.2 deviations into the off state verification 28 E.3 external reflection protection verification 29 Annex F (normative) based on the complete occlusion detection capability AOPD 31 References 32

Foreword

GB/T 19436 "Electrical safety of machinery - Electro - sensitive protective equipment" is divided into four parts. --- Part 1. General requirements and tests; --- Part 2. using active optoelectronic protective devices (AOPDs) Special equipment requirements; --- Part 3. Response diffuse active optoelectronic protective devices (AOPDDR) special requirements; --- Part 4. visual protection devices - Particular requirements. This section GB/T Part of 219,436. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 19436.2-2004 "Electrical safety of machinery - Electro - sensitive protective equipment - Part 2. using active optoelectronic protective Particular requirements for devices (AOPDs) device. " This section compared with the GB/T 19436.2-2004 main technical changes are as follows. --- Standard name changed to "Electrical safety of machinery - Electro - sensitive protective equipment - Part 2. using active optoelectronic protective devices (AOPDs) Special equipment requirements "; --- In Chapter 4, add a "optical performance" requirements and "transmitter and receiver in the same device AOPD additional requirements"; --- 5.2.9 by the contents of the "external reflection and deviations" to "optical properties verification," and adds increased requirements in Chapter 4 Verification requirements; --- Added Appendix A, Appendix B, Appendix C, Appendix D, Annex E and Annex F; --- Added technical content, expressed in terms have changed. This section uses the translation method is equivalent to using IEC 61496-2.2006 "Safety of machinery - Electro - sensitive protective equipment - Part 2. Using active optical Particular requirements for electrical protective devices (AOPDs) device. " Consistency correspondence between this part of the international documents and foreign normative documents referenced in our country with the following documents. --- Contains GB/T 19436.1-2013 corresponding files --- GB/T 19876-2005 Safety of machinery and parts of the body close to the speed of the positioning of protective equipment (ISO 13855. 2002, MOD) --- GB 20653-2006 vocational high visibility warning clothing (EN471.2003, MOD). This part is proposed by China Machinery Industry Federation. The electrical system in part by the National Machinery Industry Standardization Technical Committee (SAC/TC231) centralized. This section drafted by. Official Selection of the photoelectric Ji Industry Co., Ltd., Tianjin Jinbin China test product testing center, Ltd., Beijing Machine Bed of Sciences, Beijing KND CNC Technology Co., Ltd., Shandong Institute of Laser Academy of Sciences, Hefei co-forging Machine Tool Co., Jiangsu strength Forging Machine Co., Ltd. 9-Group Co., Ltd., Dongfeng Motor Co., Ltd. commercial vehicle plant. The main drafters of this section. to Chun Yin, Huang Zu Guang Shao light deposit, Wan Feng, Huang Lin, LIU Tong Yu, Wang Hui, Chen take the hair, Joe Hui ceremony, Chen Jianguo, Zou Qin. This part of the standard replaces the previous editions are. --- GB/T 19436.2-2004.

Introduction

Electro-sensitive protective equipment (ESPE) applies to the presence of risk of injury to human machinery. It in front of people at risk, the mechanical reply To a safe state to provide protection. GB/T 19436 provisions of this part of the design as an electrical mechanical protection devices sensitive protective equipment (ESPE), manufacturing and testing of special Special requirements which only perform ESPE sensitive function for using active optoelectronic protective devices (AOPDs). This part is GB/T 19436.1-2013 corresponding provisions of additions and modifications. As Part 1 of the special provisions in Part 2 did not mention it is reasonable. This part of the "complementary", "modification" or "Replace" that supplement, modify or replace the relevant contents of Part 1. Each type of machine has its own specific danger, the purpose of this section is not a recommended way ESPE on any particular machine used law. ESPE applications should be negotiated between suppliers, users and force mechanical mechanism such devices do, on this point, we need to note Related guidance of domestic and foreign have been developed, such as GB/T 15706. Electrical safety of machinery - Electro - sensitive protective equipment Part 2. Using active optoelectronic protective devices Particular requirements (AOPDs) equipment

1 Scope

This chapter of Part 1 is replaced as follows. This section GB/T 19436 requirements as part of the special design of the safety-related systems, sensitive functions using active optoelectronic Protection devices (AOPDs), for the detection of human electro-sensitive protective equipment (ESPE) the design, manufacture and test of special requirements. Special needs Note that for their characteristics, to ensure appropriate safety-related performance. ESPE may include some alternative security function, Such functional requirements in GB/T 19436.1-2013 and Appendix A of this part. This section does not specify the size or shape of the detection zone and it relates to hazardous parts in any particular application arrangement, nor did the What constitutes a dangerous state of any machine. This section is limited to ESPE mechanical function and how to connect. This section does not include the use of radiation in the wavelength AOPDs than 400nm ~ 1500nm range. This part may be associated with those applications for the protection of non-human related, such as. the protection of machinery or products from mechanical damage. In these applications , You may need additional requirements, such as the need identified by the sensitive functional materials, it has some characteristics different from the people. This standard does not involve electromagnetic compatibility (EMC) emission requirements.

2 Normative references

In addition to Part 1 of this chapter apply to outside references, further comprising. Supplementary reference documents. GB/T 19436.1-2013 Electrical safety of machinery - Electro - sensitive protective equipment - Part 1. General requirements and tests (IEC 61496- 1.2008, IDT) ISO 13855.2002 Safety of machinery and parts of the body close to the speed of the positioning of protective equipment (Safetyofmachinery- Positioningofprotectiveequipmentwithrespecttotheapproachspeedsofpartsofthehumanbody) IEC 60825-1.2001 Safety of laser products - Part 1. Equipment Classification, Requirements and User's Guide (Safetyoflaserprod- ucts-Part 1. Equipmentclassification, requirementsanduser'sguide) IEC /T S62046.2008 Safety of machinery to detect the presence of the human body protective equipment applications (Safetyofmachinery- Applicationofprotectiveequipmenttodetectthepresenceofpersons) EN471.2003 high visibility warning clothing for vocational testing methods and requirements (High-visibilitywarningclothingfor professionaluse-Testmethodsandrequirements)

3 Terms and Definitions

The following terms and definitions apply to this document. Supplementary definition. 3.201 Active optoelectronic protective devices activeopto-electronicprotectivedevice; AOPD Sensitive function of the device is through the optical transmitting and receiving elements, by the presence in the specified detection zone (or for beam apparatus is in Opaque object on the optical axis of the beam) the interrupt causes the means for generating optical radiation, detecting achieved. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19436.2-2013_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19436.2-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19436.2-2013_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19436.2-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19436.2-2013?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19436.2-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.