GB/T 19346.1-2017 English PDF

US$199.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19346.1-2017: Amorphous and nanocrystalline alloys measurement methods -- Part 1: AC magnetic properties by the use of ring specimens
Status: Valid

GB/T 19346.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19346.1-2017	199	Add to Cart	3 days	Amorphous and nanocrystalline alloys measurement methods -- Part 1: AC magnetic properties by the use of ring specimens	Valid
GB/T 19346-2003	279	Add to Cart	3 days	Measuring method of magnetic properties at alternative current for amorphous and nanocrystalline soft magnetic alloys	Obsolete

Similar standards

GB/T 23365   GB/T 24488   GB/T 8753.4   GB/T 45324   GB/T 45325   GB/T 19346.3   

Basic data

Standard ID: GB/T 19346.1-2017 (GB/T19346.1-2017)
Description (Translated English): Amorphous and nanocrystalline alloys measurement methods -- Part 1: AC magnetic properties by the use of ring specimens
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H21
Classification of International Standard: 77.040.99
Word Count Estimation: 10,186
Date of Issue: 2017-02-28
Date of Implementation: 2017-11-01
Older Standard (superseded by this standard): GB/T 19346-2003
Quoted Standard: GB/T 2900.1; GB/T 9637
Regulation (derived from): National Standard Announcement No. 4 of 2017
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the measurement method of AC magnetic properties of amorphous nanocrystalline alloy wound coil specimens. This standard is applicable to measuring the relative amplitude magnetic permeability in the frequency range of 50 Hz to 200 kHz for various transformer and inductance components and the amorphous nanocrystalline soft magnetic alloy for magnetic shielding, than the total loss, the apparent power Such as AC magnetic properties. If there is a suitable calibrated instrument, the upper frequency limit can be extended to 1 MHz, but the reproducibility should be appropriately relaxed.

GB/T 19346.1-2017: Amorphous and nanocrystalline alloys measurement methods -- Part 1: AC magnetic properties by the use of ring specimens

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Amorphous and nanocrystallometry measurements methods - Part 1. AC magnetic properties by the use of ring specimens ICS 77.040.99 H21 National Standards of People's Republic of China Replace GB/T 19346-2003 Test method for amorphous nanocrystalline alloys Part 1. alternating magnetic properties of annular specimens Part 1. ACmagneticpropertiesbytheuseofringspecimens 2017-02-28 released 2017-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released

Foreword

This part is part 1 of GB/T 19346. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part of the replacement GB/T 19346-2003 "amorphous nanocrystalline soft magnetic alloy AC magnetic properties test method". Compared with GB/T 19346-2003, the main contents are as follows. --- name changed to "amorphous nanocrystalline alloy test method part 1. ring sample AC magnetic performance"; - Added terms and definitions (see Chapter 3); - removed the voltammetric method of AC magnetic measurement (see Chapter 3 of the.2003 edition); - Added general rules and modified sample requirements (see Chapter 4, Chapter 4 of the.2003 edition); - Added technical requirements for digital peak ammeter, voltage digital-to-analog converters and power meters (see 5.4, 5.5, 5.16,.2003) Chapter 6); - a method of measuring the permeability and magnetization curves by voltammetry (see Chapter 6); - Removal of the voltammetric method (see 5.1 of.2003); - increased method of measuring total loss with a power meter (see Chapter 7); - modified and supplemented the digital sampling method and increased the measurement method of apparent power (see Chapter 8, Edition 5.2 of.2003); - Increased requirements for reproducibility and uncertainty assessment of measurement results (see Chapter 9); - Added the measurement report (see Chapter 10, Chapter 8 of the.2003 edition). This part is made by China Iron and Steel Industry Association. This part is headed by the National Steel Standardization Technical Committee (SAC/TC183). This part of the drafting unit. China Steel Research Technology Group Co., Ltd., Metallurgical Industry Information Standards Institute, China Institute of Metrology. The main drafters of this part. Lu Zhichao, Chen Wenzhi, Luan Yan, Li Deren, Liu Guodong, Zhang Zhigao, He Jian. This part of the previous version of the standard to replace the release of the situation. --- GB/T 19346-2003. Test method for amorphous nanocrystalline alloys Part 1. alternating magnetic properties of annular specimens

1 Scope

This part of GB/T 19346 specifies the measurement method for the alternating magnetic properties of amorphous nanocrystalline alloy wound ring specimens. This part is suitable for measuring a variety of transformer and inductance components and magnetic shielding with amorphous nanocrystalline soft magnetic alloy at 50Hz ~ 200kHz frequency range of the relative amplitude of the permeability, than the total loss, compared to the apparent power AC magnetic performance. If there is a suitable calibration Of the instrument, the frequency upper limit can be extended to 1MHz, but this time the reproduction should be appropriate to relax the requirements.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 2900.1 Basic terminology for electrical terminology Electrotechnical terminology - Magnetic materials and components GB/T

3 terms and definitions

GB/T 2900.1 and GB/T 9637 and the following terms and definitions apply to this document. 3.1 Than the total loss of specifictotalloss The total power absorbed by the unit mass of the homogeneous magnetized material in watts per kilogram (W/kg). 3.2 More specific than the apparent power Than apparent power The total apparent power delivered to the uniform magnetization of the unit mass in volts per kilogram (VA/kg).

4 General rules

4.1 Specimen 4.1.1 Measurement of AC magnetic properties of amorphous nanocrystalline soft magnetic alloys An annular specimen made of strip is used. If no special requirements, winding system The strip surface does not take insulation measures when the sample is taken. 4.1.2 Recommended specimen diameter of 35mm ± 2mm, the sample diameter and diameter ratio should be less than 1.25. If you need to use other feet The sample should be stated in the measurement report. 4.1.3 Specimens should be flat, burr, deformation and other defects. 4.1.4 The specimen shall be subjected to appropriate heat treatment prior to measurement. Specimen in the heat treatment process, should use non-ferromagnetic metal or ceramic lining support Hold the specimen inside the window to prevent the specimen from being deformed. The diameter of the lining should be slightly smaller than the diameter of the specimen and the height is comparable to that of the specimen. Sample heat treatment should be In a protective atmosphere to prevent surface oxidation. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19346.1-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19346.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19346.1-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19346.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19346.1-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19346.1-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.