GB/T 1927.11-2022 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1927.11-2022: Test methods for physical and mechanical properties of small clear wood specimens - Part 11: Determination of ultimate stress in compression parallel to grain Status: Valid
Basic dataStandard ID: GB/T 1927.11-2022 (GB/T1927.11-2022)Description (Translated English): Test methods for physical and mechanical properties of small clear wood specimens - Part 11: Determination of ultimate stress in compression parallel to grain Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B68 Word Count Estimation: 8,870 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 1927.11-2022: Test methods for physical and mechanical properties of small clear wood specimens - Part 11: Determination of ultimate stress in compression parallel to grain---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for physical and mechanical properties of small clear wood specimens - Part 11.Determination of ultimate stress in compression parallel to grain ICS 79.040 CCSB68 National Standards of People's Republic of China Replacing GB/T 1935-2009 Test method for physical and mechanical properties of wood with small sample without defect Part 11.Determination of compressive strength along grain 2022-07-11 Released 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 11 of GB/T 1927 "Test Methods for Physical and Mechanical Properties of Small Specimens of Wood without Defects". GB/T 1927 has been issued The following parts are distributed. --- Part 1.Collection of test materials; --- Part 2.Sampling methods and general requirements; --- Part 3.Determination of growth ring width and latewood rate; --- Part 4.Determination of moisture content; --- Part 5.Density determination; --- Part 6.Determination of dry shrinkage; --- Part 7.Determination of water absorption; --- Part 8.Determination of swelling properties; --- Part 9.Determination of flexural strength; --- Part 10.Determination of flexural modulus of elasticity; --- Part 11.Determination of compressive strength along grain; --- Part 12.Determination of transverse grain compressive strength; --- Part 13.Determination of compressive elastic modulus of transverse grains; --- Part 14.Determination of tensile strength along grain; --- Part 15.Determination of transverse grain tensile strength; --- Part 16.Determination of shear strength along grain; --- Part 17.Determination of impact toughness; --- Part 18.Determination of impact indentation; --- Part 19.Determination of hardness; --- Part 20.Determination of splitting resistance; --- Part 21.Determination of nail holding force. This document replaces GB/T 1935-2009 "Test method for compressive strength along grain of wood". Compared with GB/T 1935-2009, except for the structural In addition to adjustments and editorial changes, the main technical changes are as follows. a) Changed the testing machine requirements (see 5.1; 4.1 and 6.2 of the.2009 edition); b) Changed the size requirements of the sample (see 6.2; 5.2 of the.2009 edition); c) changed the loading speed (see 7.2; 6.2 of the.2009 edition); d) Modified the applicable moisture content range for the compressive strength along grain when the moisture content of air-dried wood samples is 12% (see 8.2,.2009 edition) 7.2). This document is modified to adopt ISO 13061-17.2017 "Test methods for the physical and mechanical properties of wood with small specimens without defects - Part 17.Along grain Determination of Compressive Ultimate Stress". The technical differences between this document and ISO 13061-17.2017 and the main reasons are as follows. --- Changed terms and definitions (see Chapter 3). The following editorial changes have been made to this document. --- In order to harmonize with the existing standards, the name of the standard is changed to "Test methods for the physical and mechanical properties of wood with small samples without defects - Part 11. Determination of Grain Compressive Strength. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by the State Forestry and Grassland Administration. This document is under the jurisdiction of the National Timber Standardization Technical Committee (SAC/TC41). This document is drafted by. Timber Industry Research Institute, Chinese Academy of Forestry, Zhejiang Shiyou Wood Industry Co., Ltd., Hongmufang Home Furnishing Technology (Huzhou) Co., Ltd., Xiamen Minghongtang Arts and Crafts Co., Ltd., Zhejiang Wei Laoda Industry and Trade Co., Ltd., Guangdong Forestry Research Institute, Zhejiang Provincial Forestry Research Institute. The main drafters of this document. Jiang Jinghui, Lv Jianxiong, Zhou Yongdong, Zhang Jian, An Xin, Yu Huaqiang, Cao Yongjian, Zhou Haibin, Chaohui, Zhong Yong, Chen Long, Zhang Chao, Huang Can, Zhang Shuai, Wang Sidong. The previous versions of the documents replaced by this document are as follows. --- First published in 1980 as GB 1935-1980, first revised in.1991, second revised in.2009; --- This is the third revision, adjusted to Part 11 of GB/T 1927.IntroductionThe standard of test methods for physical and mechanical properties of wood is used in wood scientific research, teaching, wood inspection, wood structure design, wood processing and production, etc. It is widely used and is an important basic standard in the wood industry. In 1980, my country issued the first edition of the test methods for physical and mechanical properties of wood. The domestic standard (GB/T 1927~GB/T 1943) was revised twice in.1991 and.2009 respectively. In recent years, with the development of wood science and technology The development of technology, ISO 3129.2012 "Sampling methods for wood physical and mechanical tests of small samples of wood without defects and "General Requirements" has been revised, ISO 3130.1975 "Determination of moisture content by physical and mechanical tests of wood", ISO 3131.1975 "Wood 15 international standards for test methods such as "Determination of Density in Physical and Mechanical Tests" have been integrated and revised. Based on this, in order to be in line with international standards, this time The third revision was made to the national standard for test methods for physical and mechanical properties of wood in my country, and the 22 scattered test method standards were integrated and adjusted to The sub-part document of GB/T 1927 adopts the latest version of the international standard in the revision. GB/T 1927 aims to establish a test method for the physical and mechanical properties of small sample wood without flaws, and is intended to be composed of 21 parts. --- Part 1.Collection of test materials. The purpose is to describe the sample collection method for testing the physical and mechanical properties of wood with small samples without defects. --- Part 2.Sampling methods and general requirements. The purpose is to establish a suitable test for the physical and mechanical properties of small wood samples without defects. Specimen sawing, interception methods and general requirements to be observed when testing methods. --- Part 3.Determination of growth ring width and latewood rate. The purpose is to characterize the growth ring width and latewood rate of small samples of clear wood method of measurement. --- Part 4.Determination of moisture content. The purpose is to describe a method for the determination of the moisture content of small wood samples without defects. --- Part 5.Density determination. The purpose is to describe the density, air-dry density, absolute dry Methods for the determination of density and basic density. --- Part 6.Determination of dry shrinkage. The purpose is to describe the measurement of radial, chordwise and volume drying shrinkage of unblemished small sample wood. determined method. --- Part 7.Determination of water absorption. The purpose is to describe the determination method of 6h, 24h and the maximum water absorption rate of small sample wood without defect. --- Part 8.Determination of swelling. The purpose is to describe the measurement of radial, chordwise and volumetric swell of unblemished small wood samples. determined method. --- Part 9.Determination of flexural strength. The purpose is to describe a method for the determination of the flexural strength of small wood samples without defects. --- Part 10.Determination of flexural modulus of elasticity. The purpose is to describe a method for the determination of the flexural modulus of elasticity of small wood samples without defects. --- Part 11.Determination of compressive strength along grain. The purpose is to describe a method for the determination of the compressive strength along the grain of small wood samples without defects. --- Part 12.Determination of transverse grain compressive strength. The purpose is to describe the transverse grain compressive proportional ultimate strength of small unblemished wood samples, including Method for the determination of the ultimate compressive proportional ultimate strength of the entire transverse grain and the partial compressive proportional ultimate strength of the transverse grain --- Part 13.Determination of compressive elastic modulus of transverse grains. The purpose is to describe the measurement of the transverse-grain compressive elastic modulus of unblemished small samples of wood. determined method. --- Part 14.Determination of tensile strength along grain. The purpose is to describe a method for the determination of the along-grain tensile strength of unblemished small samples of wood. --- Part 15.Determination of transverse grain tensile strength. The purpose is to describe a method for the determination of the transverse grain tensile strength of small wood samples without defects. --- Part 16.Determination of shear strength along grain. The purpose is to describe a method for the determination of the shear strength along the grain of small wood samples without defects. --- Part 17.Determination of impact toughness. The purpose is to describe a method for the determination of the chordwise impact toughness of small unblemished wood samples. --- Part 18.Determination of impact indentation. The purpose is to describe a method for the determination of the impact indentation resistance of unblemished small samples of wood. --- Part 19.Determination of hardness. The purpose is to describe a method for the determination of radial, chord, and longitudinal hardness of small, unblemished wood samples. --- Part 20.Determination of splitting resistance. The purpose is to describe the method for the determination of the splitting resistance on the radial and chord surfaces of small wood samples without defects. --- Part 21.Determination of nail holding force. The purpose is to describe a method for the determination of the nail-holding force of small samples of wood without defects. Test method for physical and mechanical properties of wood with small sample without defect Part 11.Determination of compressive strength along grain1 ScopeThis document describes the test principle, equipment, specimens, test procedures, calculation of results and tests for the determination of the compressive strength along the grain of small unblemished wood samples. inspection report, etc. This document is applicable to the along-grain compressive strength test of small unblemished wood samples.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations For documents, only the dated version applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 1927.2-2021 Test methods for the physical and mechanical properties of wood with small unblemished samples - Part 2.Sampling methods and general rules (ISO 3129.2019, MOD) GB/T 1927.4 Test methods for physical and mechanical properties of wood with small flawless specimens - Part 4.Determination of moisture content (GB/T 1927.4- 2021, ISO 13061-1.2014, MOD) GB/T 1927.5 Test methods for the physical and mechanical properties of wood with small unblemished samples - Part 5.Determination of density (GB/T 1927.5- 2021, ISO 13061-2.2014, MOD) LY/T 1788 Timber Properties Terms3 Terms and DefinitionsTerms and definitions defined in LY/T 1788 apply to this document.4 PrinciplesApply pressure to failure at a uniform speed along the grain direction of the wood to determine the grain compressive strength of the wood.5 Test equipment5.1 The testing machine, the accuracy of measuring the load, shall meet the requirements of Chapter 5 of GB/T 1927.2-2021, that is, 1% of the indication accuracy, and have The spherical sliding bearing, or the upper and lower bearings can rotate in one direction. 5.2 The measurement size of the test measuring tool should be accurate to 0.1mm. 5.3 The wood moisture content measurement and density measurement equipment shall meet the requirements of GB/T 1927.4 and GB/T 1927.5. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1927.11-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 1927.11-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1927.11-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1927.11-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
