GB/T 18910.11-2024 English PDFUS$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18910.11-2024: Liquid crystal display devices - Part 1-1: Generic specification Status: Valid GB/T 18910.11: Historical versions
Basic dataStandard ID: GB/T 18910.11-2024 (GB/T18910.11-2024)Description (Translated English): Liquid crystal display devices - Part 1-1: Generic specification Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L53 Classification of International Standard: 31.120 Word Count Estimation: 30,337 Date of Issue: 2024-04-25 Date of Implementation: 2024-08-01 Older Standard (superseded by this standard): GB/T 18910.1-2012 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 18910.11-2024: Liquid crystal display devices - Part 1-1: Generic specification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 31:120 CCSL53 National Standards of People's Republic of China Replaces GB/T 18910:1-2012 Liquid crystal display devices Part 1-1: General specification Released on 2024-04-25 2024-08-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 General 2 4:1 Priority 2 4:2 Standard environmental conditions 2 4:3 Sign 2 4:4 Quality Assessment Category 3 4:5 Screening 3 4:6 Operation 3 5 Quality Assessment Procedure 3 5:1 General 3 5:2 Commercial Confidential Information 4 5:3 Composition of inspection lot 4 5:4 Devices with similar structures 4 5:5 Granting of Approval 4 5:6 Quality consistency inspection 4 5:7 Statistical sampling procedures 8 5:8 Durability test 8 5:9 Durability test at specified failure rate 8 6 Experimentation and test procedures 9 6:1 Standard atmospheric conditions for electrical and optical tests 9 6:2 Physical Inspection 9 6:3 Electro-optical test 10 6:4 Environmental testing 10 6:5 Mechanical tests 10 Appendix A (Informative) Example of LCD screen appearance drawing 11 Appendix B (Normative) Orientation of LCD Modules 14 Appendix C (Informative) Lot Percentage of Defective Products (LTPD) Sampling Plan 15 Reference 21ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document is Part 1-1 of GB/T 18910: GB/T 18910 has been published in the following parts: --- Liquid crystal display devices Part 1-1: General specification (GB/T 18910:11); --- Liquid crystal display devices Part 1-2: Terms and symbols (GB/T 18910:12); --- Liquid crystal display devices Part 2: Liquid crystal display module specification (GB/T 18910:2); --- Liquid crystal display devices Part 2-1: Passive matrix monochrome liquid crystal display module blank detail specification (GB/T 18910:21); --- Liquid crystal display devices Part 2-2: Blank detail specification for color matrix liquid crystal display modules (GB/T 18910:22); --- Liquid crystal display devices Part 3: Liquid crystal display panel specification (GB/T 18910:3); --- Liquid crystal display devices Part 4: Basic ratings and characteristics of liquid crystal display modules and panels (GB/T 18910:4); --- Liquid crystal display devices Part 4-1: Basic ratings and characteristics of color matrix liquid crystal display modules (GB/T 18910:41); --- Liquid crystal and solid state display devices Part 5: Environmental, durability and mechanical test methods (GB/T 18910:5); --- Liquid crystal display devices Part 6-1: Test methods for photoelectric parameters of liquid crystal display devices (GB/T 18910:61); --- Liquid crystal display devices Part 6-2: Test methods for liquid crystal display modules - Reflective type (GB/T 18910:62); --- Liquid crystal display devices Part 6-3: Test methods for liquid crystal display modules Motion artifacts in active matrix liquid crystal display modules (GB/T 18910:63); --- Liquid crystal display devices Part 10-1: Environmental, durability and mechanical test methods Mechanical (GB/T 18910:101); --- Liquid crystal display devices Part 10-2: Environmental, durability and mechanical test methods Environment and durability (GB/T 18910: 102); --- Liquid crystal display devices Part 20-1: Visual inspection of monochrome liquid crystal displays (GB/T 18910:201); --- Liquid crystal display devices Part 20-2: Visual inspection of monochrome matrix liquid crystal display modules (GB/T 18910:202); --- Liquid crystal display devices Part 20-3: Visual inspection of active matrix color liquid crystal display modules (GB/T 18910:203): This document replaces GB/T 18910:1-2012 "Liquid Crystal Display Devices Part 1: General Specification" and is consistent with GB/T 18910:1-2012: In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Deleted the relevant contents about IEC Q and QC (see 4:1, 5:3, 5:4, 5:5, 5:6, 5:7:3:4, 5:7:6); b) The qualification for appraisal and approval has been deleted (see 5:2 of GB/T 18910:1-2012); c) Change "Note 2" and "Note 3" in 6:3:1 to the main text (see 6:3:1, 6:3:1:1 of GB/T 18910:1-2012); d) Mechanical tests were added (see 6:5): This document is equivalent to IEC 61747-1-1:2014 "Liquid crystal display devices Part 1-1: General specifications": The following minimal editorial changes were made to this document: ---The name of the standard is changed to "Liquid Crystal Display Devices Part 1-1: General Specification": --- Because 6:2:2 in IEC 61747-1-1:2014 is for dimensions, 6:2:2:2 is for marking durability, 6:2:2:3 is for conditions, and 6:2:2:4 is for initial Inspection and final inspection, 6:2:2:3 and 6:2:2:4 are about the durability of the sign: There is an error in the editing, so delete "6:2:2:1 Overall Change the clause number and title of "6:2:2:2" to "6:2:3", "6:2:2:3" to "6:2:3:1", and "6:2:2:4" to "6:2:3:2": Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This document is under the jurisdiction of the National Technical Committee for Standardization of Electronic Display Devices (SAC/TC547): This document was drafted by: China Electronics Standardization Institute, South China University of Technology, BOE Technology Group Co:, Ltd:, TCL Huaxing Optoelectronics Technology Co:, Ltd:, Tianma Microelectronics Co:, Ltd:, Xiamen Product Quality Supervision and Inspection Institute, Suiyuan Intelligent Technology (Chengdu) Co:, Ltd: The main drafters of this document are: Zhao Ying, Li Zongtao, Wang Feixia, Zhang Zhigang, Huang Weidong, Zhou Haiqin, Fu Nuoyi and Chen Yudong: The previous versions of this document and the documents it replaces are as follows: ---First published in:2002 as GB/T 18910:1-2002, first revised in:2012;IntroductionIn order to meet the production, manufacturing, inspection, and import and export trade needs of liquid crystal display devices in my country, a series of standards for liquid crystal display devices are formulated: GB/T 18910 “Liquid Crystal Display Devices” is intended to consist of the following parts: --- Part 1-1: General specification: The purpose is to specify the general procedures for the inspection of liquid crystal display devices and to give the electro-optical characteristics test method: General requirements, requirements for climatic, mechanical and durability tests: --- Part 1-2: Terms and symbols: The purpose is to define the preferred terms, definitions and text symbols for liquid crystal display devices: --- Part 2: Liquid crystal display module section specification: The purpose is to specify the quality assessment procedures and inspection requirements required for evaluating liquid crystal display modules: requirements, screening sequences, sampling requirements, details of tests and test methods: --- Part 2-1: Passive matrix monochrome liquid crystal display module blank detail specification: The purpose is to specify the format and summary page requirements: The minimum requirements and detailed specifications: --- Part 2-2: Blank Detailed Specification for Color Matrix Liquid Crystal Display Modules: The purpose is to specify the format and summary page and detailed The requirements for the most basic content of the specification: --- Part 3: Liquid crystal display screen specification: The purpose is to specify the quality assessment procedures and inspection requirements required for evaluating liquid crystal display screens: requirements, screening sequences, sampling requirements, tests and test methods: --- Part 3-1: Liquid Crystal Display (LCD) Screen Blank Detailed Specification: The purpose is to define the quality assessment system for LCD screens: --- Part 4: Basic ratings and characteristics of liquid crystal display modules and panels: The purpose is to specify liquid crystal display panels and passive matrix monochrome Basic ratings and characteristic requirements of LCD display modules: --- Part 4-1: Basic ratings and characteristics of color matrix liquid crystal display modules: The purpose is to specify the basic ratings and characteristics of color matrix liquid crystal display modules: Basic ratings and characteristic requirements of the block: --- Part 5: Environmental, durability and mechanical test methods: The purpose is to evaluate the environmental performance of liquid crystal display devices and to determine uniform The preferred test method and preferred value of stress level: --- Part 6-1: Test methods for electro-optical parameters of liquid crystal display devices: The purpose is to specify the standard for electro-optical parameters of liquid crystal display devices: Standard test conditions and test methods: --- Part 6-2: Test method for liquid crystal display module reflective type: The purpose is to specify the detailed quality of reflective liquid crystal display modules Evaluation procedures, inspection requirements, screening procedures, sample requirements, and test and measurement procedure requirements: --- Part 6-3: Liquid crystal display module test method Active matrix liquid crystal display module motion artifacts: The purpose is to specify the transmissive General quality assessment procedure for motion picture performance of thin film transistor liquid crystal display devices: --- Part 6-4: Test methods for liquid crystal display modules Liquid crystal display modules with dynamic backlight: The purpose is to specify the Standard test conditions and test methods for the optical performance and power consumption of active-matrix liquid crystal display modules: --- Part 10-1: Environmental, durability and mechanical test methods Mechanical: The purpose is to evaluate the mechanical properties of liquid crystal display devices It is possible to determine a unified optimal test method and optimal value of stress level: --- Part 10-2: Environmental, durability and mechanical test methods Environmental and durability: The purpose is to evaluate the performance of liquid crystal display devices: Environmental performance, determine the unified optimal test method and stress level optimal value: --- Part 10-3: Environmental, durability and mechanical test methods for glass strength and reliability: The purpose is to specify liquid crystal display devices Test methods for strength and reliability of glass: --- Part 20-1: Visual inspection of monochrome liquid crystal displays: The purpose is to specify the visual inspection method for monochrome liquid crystal displays: --- Part 20-2: Visual inspection of monochrome matrix liquid crystal display modules: The purpose is to specify the visual inspection method for monochrome matrix liquid crystal display modules: --- Part 20-3: Visual inspection of active matrix color liquid crystal display modules: The purpose is to give the visual inspection of transmissive active matrix color liquid crystal display modules by the human eye: Detailed requirements and general rules for the quality assessment procedure for visual inspection of liquid crystal display modules: Liquid crystal display devices Part 1-1: General specification1 ScopeThis document is a general specification for liquid crystal display devices: It specifies the general inspection procedures and gives the general requirements for the electro-optical characteristics test methods: Requirements, climate, mechanical and durability test requirements: This document applies to the quality assessment of liquid crystal display devices, including liquid crystal display panels and liquid crystal display modules:2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document: For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document: GB/T 4589:1-2006 Semiconductor devices Part 10: General specification for discrete devices and integrated circuits (IEC 60747-10: 1991,IDT) ISO 2859-1 Sampling procedures for inspection by attributes Part 1: Sampling plans for lot-by-lot inspection indexed by acceptance quality limit (AQL) Note: GB/T 2828:1-2012 Sampling procedures for inspection by attributes Part 1: Sampling plans for batch inspection based on acceptance quality limit (AQL) (ISO 2859-1:1999,IDT) ISO 2859-10 Sampling procedures for inspection by attributes Part 10: Guidelines for the ISO 2859 series of standards on sampling procedures for inspection by attributes Note: GB/T 2828:10-2010 Sampling inspection procedures for attributes Part 10: GB/T 2828 Guidelines for sampling inspection series of attributes (ISO 2859-10: 2006, MOD) tributes) Note: GB/T 4937 (all parts) Mechanical and climatic test methods for semiconductor devices [IEC 60749 (all parts)] Note: GB/T 18910:12-2024 Liquid crystal display devices Part 1-2: Terminology and text symbols (IEC 61747-1-2:2014, MOD) IEC 61747-10-1 Liquid crystal display devices Part 10-1: Environmental, durability and mechanical test methods Mechanical (Liquid ical) Note: GB/T 18910:101-2021 Liquid crystal display devices Part 10-1: Environmental, durability and mechanical test methods Mechanical (IEC 61747-10-1: 2013, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18910.11-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 18910.11-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18910.11-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18910.11-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18910.11-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18910.11-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
