GB/T 18607-2017 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 18607-2017	RFQ	ASK	3 days	Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump	Valid
GB/T 18607-2008	RFQ	ASK	6 days	Specification for subsurface sucker rod pumps and fittings	Obsolete
GB/T 18607-2001	RFQ	ASK	11 days	Pump and its component specification	Obsolete

Similar standards

GB/T 18604   GB/T 23258   SY/T 5164   GB/T 45134   GB/T 23506   

Basic data

Standard ID: GB/T 18607-2017 (GB/T18607-2017)
Description (Translated English): Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E92
Classification of International Standard: 75.180.10
Word Count Estimation: 118,183
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 18607-2017: Petroleum and natural gas industries -- Drilling and production equipment -- Reciprocating full liner pump

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries-Drilling and production equipment-Reciprocating full liner pump ICS 75.180.10 E92 National Standards of People's Republic of China Replacing GB/T 18607-2008 Oil and gas industry Drilling and oil extraction equipment reciprocating whole cylinder pump Published on.2017-12-29 2018-07-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration released Directory Preface III 1 Scope 1 2 Normative references 1 3 Terms, definitions, symbols, and abbreviations 1 4 Functional requirements 5 5 Technical Requirements 6 6 Manufacturer Requirements 6 Appendix A (Normative) Suction pump assembly 10 Appendix B (Normative Appendix) Suction Pump Parts 21 Appendix C (normative) Measurement, test and inspection 85 Appendix D (Normative) Mark 86 Appendix E (Normative Appendix) Material 87 Appendix F (Normative) Threaded connections 93 Appendix G (Informative Appendix) Rod pumping system Figure 106 Appendix H (Informative) The clearance gap between the metal plunger and the pump cylinder 107 Appendix I (informative) Pump assembly sealing performance test pressure recommendation 108 Appendix J (informative annex) Maximum clearance loss recommendation value of 109 Appendix K (Informative) Metric Common Thread Size 110 for Suction Pumps and Parts Thereof Appendix L (informative) This standard and APISpec11AX.2015 (13th edition) technical differences and their causes 111

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 18607-2008 "Pumping pump and its components specification", compared with GB/T 18607-2008, the main technical changes As follows. ---Modified the standard name; --- Added 19 terms and definitions such as "100% inspection, batch processing, calibration standards, carbonitriding" (see 3.1); --- Added "symbols and abbreviations" (see 3.2 and 3.3); --- Added "functional requirements" (see Chapter 4); --- Increased material requirements (see 5.2); --- Added "Manufacturer Requirements" (see Chapter 6); --- Added "qualification of personnel, acceptance criteria, unqualified production process, coating, heat treatment furnace instrument, ultrasonic and magnetic powder nondestructive testing (NDT), Product Markings and Record Content (see 6.1.3, 6.1.4, 6.1.5, 6.1.6, 6.1.7, 6.1.8, 6.2 and 6.3); --- Added "27.0 (11⁄4) 106 specification pump" in the main part numbering system (see Table B.1); --- Added "pump pumping system diagram" (see Appendix G); --- Added an informative appendix "Metric Common Thread Sizes for Suction Pumps and their Components" (see Annex K); ---Increase the informative appendice "This standard and APISpec11AX.2015 (13th edition) technical differences and its causes" (see attached Record L). This standard is proposed and managed by the National Oil Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96). This standard was drafted. China National Petroleum Corporation Yumen Oilfield Branch Machinery Plant, CNPC Drilling Engineering Technology Institute Jianghan Machinery Research Institute, Tieling Zhongyou Machinery Equipment Manufacturing Co., Ltd., Xianyang Gem Steel Pipe Steel Wire Rope Co., Ltd., China Petroleum Day Natural Gas Co., Ltd. Liaohe Oilfield Branch, CNPC Bohai Petroleum Equipment Manufacturing Co., Ltd. New Century Machinery Manufacturing Branch, Shengli Oilfield Plateau Petroleum Equipment Co., Ltd. The main drafters of this standard. Jia Bo, Tang Liangwen, Zheng Lei, Liu Lianwei, Zhong Yonghai, Wang Mingqiao, Liu Xiangnan, Li Jiyun, Yan Xiuwen, Yan Xiaolong, Zhang Wei, Xiao Li, Wang Zhiming, Wu Qinghe, Yang Song, Zhu Heng, Lang Fan, Zhang Yushu, Liu Hongcui, Gang Ruichao. The previous versions of the standard replaced by this standard are. --- GB/T 18607-2001, GB/T 18607-2008. Oil and gas industry Drilling and oil extraction equipment reciprocating whole cylinder pump

1 Scope

This standard specifies a reciprocating full barrel pump used in the rod pumping system used in the oil and gas industry (hereinafter referred to as the pump). Design requirements and test methods. This standard applies to the general pump diameter pump assembly (including rod pump and tube pump), parts and components of rod pumping system. for Ensuring that all parts are standardized and interchangeable provides sufficient size requirements. Note. This standard has detailed provisions for many parts and components, so no design package is required. However, some parts require design packages that are organized in tables B.9~Table B.17, B.21, B.22, B.27, B.29, B.31, B.32, B.36, B.37, B.38, B.39, B .40, B.43, B.48, B.52, B.53, B.54, B.58. This standard does not apply to the design of a special pump, nor does it include the installation, operation and maintenance of a pump. About installation, operation and maintenance See SY/T 5188 for details.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 197 Common thread tolerances (GB/T 197-2003, ISO 965-1.1998, MOD) GB/T 228.1 Tensile test of metallic materials - Part 1. Test method for room temperature (GB/T 228.1-2010, ISO 6892-1. 2009, MOD) GB/T 230.1 Rockwell hardness test for metallic materials - Part 1. Test methods (A, B, C, D, E, F, G, H, K, N, T Ruler (GB/T 230.1-2009, ISO 6508-1.2005, MOD) GB/T 1804 Tolerance tolerance for linear and angular dimensions of general tolerances (GB/T 1804-2000, ISO 2786-1. 1989, EQV) GB/T 2828.1 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling Plans Retrieved by Acceptance Quality Limit (AQL) (GB/T 2828.1-2012, ISO 2859-1.1999, IDT) GB/T 4340.1 Vickers hardness test of metallic materials - Part 1. Test method (GB/T 4340.1-2009, ISO 6507- 1.2005,MOD) GB/T 9253.2 Petroleum, natural gas industrial casing, tubing and line pipe thread processing, measurement and inspection GB/T 9445 Qualification and certification of nondestructive testing personnel (GB/T 9445-2015, ISO 9712.2012) GB/T 18449.1 Knoop hardness test of metallic materials - Part 1. Test method (GB/T 18449.1-2009, ISO 4545-1.2005, MOD) SY/T 5029 Sucker Rod Recommended Practice for Maintenance and Use of SY/T 5188 Suction Pumps 3 Terms, definitions, symbols and abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this document. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18607-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18607-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18607-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18607-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 18607-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18607-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.