GB/T 18569.2-2020 PDF EnglishUS$165.00 · In stock · Download in 9 seconds
GB/T 18569.2-2020: Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 18569.2: Historical versions
Similar standardsGB/T 18569.2-2020: Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18569.2-2020 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.110 J 09 GB/T 18569.2-2020 / ISO 14123-2.2015 Replacing 18569.2-2001 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2. Methodology leading to verification procedures (ISO 14123-2.2015, IDT) Issued on: JUNE 02, 2020 Implemented on: DECEMBER 01, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of PRC. Table of ContentsForeword... 3 Introduction... 5 1 Scope... 7 2 Normative references... 7 3 Terms and definitions... 7 4 Methods... 7 4.1 Overview... 7 4.2 Identifying hazardous substances... 8 4.3 Determining emission characteristics... 8 4.4 Identifying key factors... 8 4.5 Specifying characterizing parameters... 9 5 Verification... 9 Appendix A (Normative) Steps to generate a verification flow... 10 Appendix B (Informative) Examples of emission types and their assessment methods ... 11 Appendix C (Informative) Examples of relevant factors and their characterization parameters... 12 References... 13ForewordGB/T 18569 " Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery" consists of the following two parts. - Part 1.Principles and specifications for machinery manufacturers; - Part 2.Methodology leading to verification procedures. This Part is Part 2 of GB/T 18569. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 18569.2-2001 "Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 2.Methodology leading to verification procedures". Compared with GB/T 18569.2-2001, the main changes are. - CHANGE the title of the standard into "Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2. Methodology leading to verification procedures"; - ADD the "Introduction" (see Introduction); - ADD the Chapter 3, the rest of the numbers are changed accordingly (see Chapter 3); - ADD the "References" (see References). This Part uses the translation method, to identically adopt ISO 14123-2.2015 "Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2.Methodology leading to verification procedures". For ease of use, this Part of ISO 14123-2.2015 has made the following editorial changes. - MODIFY the editorial errors in 4.4.2, to be consistent with Table A.1, changing "Identify" into "Select"; - MODIFY an editorial error in the unit of stirring speed in Table C.1.changing "r/m- 1" into "r/min". This Part was proposed by AND shall be under the jurisdiction of the National Machinery Safety Standardization Technical Committee (SAC/TC 208). Drafting organizations of this Part. China Testing and Certification Group Co., Ltd., Dongguan Huile Environmental Protection Co., Ltd., Maanshan Chenxu Machinery Manufacturing Co., Ltd., Henan Zhongzhike Standardization Research Institute Co., Ltd., Xiamen Rituo Electrical Technology Co., Ltd., Nanjing Forestry Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2. Methodology leading to verification procedures1 ScopeThis Part of GB/T 18569 specifies a method for selecting key factors, which are related to the discharge of hazardous substances, to determine the applicable verification process. This Part is intended to be used in conjunction with GB/T 18569.1-2020, especially in relation to Chapter 8 of GB/T 18569.1-2020.2 Normative referencesThe following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 15706-2012 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100.2010, IDT) GB/T 18569.1-2020 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1.Principles and specifications for machinery manufacturers (ISO 14123-1.2015, IDT)3 Terms and definitionsThe terms and definitions, which are defined in GB/T 15706-2012 and GB/T 18569.1- 2020, apply to this document.4 Methods4.1 Overview This chapter specifies the steps, which are used to generate the verification process. Appendix A summarizes these steps and examples. 4.2 Identifying hazardous substances 4.2.1 Identify the substances, that the machine may emit, during the intended use period (see Chapter 4 of GB/T 15706 and GB/T 18569.1-2020). 4.2.2 Determine which of the identified substances are harmful to health and the characteristics of the hazards (see the example in 3.2 of GB/T 18569.1-2020). 4.2.3 If multiple hazardous substances are identified, the verification process should be used for the key substances, which exhibit the worst-case characteristics. The key substances can be determined, according to toxicity, corrosiveness, solubility, dusting and so on. 4.3 Determining emission characteristics For all major sources of hazardous material emissions, which are identified by 4.2.3, the following shall be determined. - The probable amount or scale of emissions, under all foreseeable circumstances, at all stages of the life cycle of the machine; Note. Emissions can be characterized by one of a variety of assessment techniques (see Appendix B). - The location and direction of the emission, as relative to the machine and the possible location of the personnel; - The time at which the emission is likely to occur (this should be related to the likelihood of the presence of personnel and the operating cycle of the machine); - The physical properties of the emission, such as phase state, diffusion rate, temperature, pressure; - Whether there is a possibility of airborne emissions or surface contamination. 4.4 Identifying key factors 4.4.1 Identify any relevant factors causing emissions, as well as the methods to reduce emissions based on these factors. Note. Relevant factors may be related to the design or performance of materials, energy or machines, examples of which are given in Appendix C. 4.4.2 Select key factors, that is, the relevant factors that most affect emissions. 4.5 Specifying characterizing parameters 4.5.1 Identify characterizing parameters, that are directly related to the identified key factors. Note. Examples are given in Appendix C. 4.5.2 Specify the values, ranges, conditions or states of the characterizing parameters, which are required to reduce emissions.5 Verification5.1 Verification shall be carried out, by collecting data related to the characterizing parameters. 5.2 Verification may include results from field tests, laboratory tests, measurements, inspections or calculations. 5.3 GB/T 25749 gives a series of general test methods, that can be used as part of verification. More detailed test conditions for specific machines or groups of machines can be found in category C standards. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 18569.2-2020 be delivered?Answer: The full copy PDF of English version of GB/T 18569.2-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 18569.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18569.2-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18569.2-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 18569.2-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18569.2-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 18569.2-2020?A step-by-step guide to download PDF of GB/T 18569.2-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 18569.2-2020". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
