GB/T 18444-2025 English PDFUS$594.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18444-2025: Imaging materials - Processed safety photographic films - Storage practices Status: Valid GB/T 18444: Historical versions
Basic dataStandard ID: GB/T 18444-2025 (GB/T18444-2025)Description (Translated English): Imaging materials - Processed safety photographic films - Storage practices Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G80 Classification of International Standard: 37.040.20 Word Count Estimation: 30,384 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 18444-2001 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 18444-2025: Imaging materials - Processed safety photographic films - Storage practices---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18444-2025ICS 37.040.20 CCSG80 National Standard of the People's Republic of China Replaces GB/T 18444-2001 Image material processed safety photographic film Storage procedures Storage practices (ISO 18911.2010, IDT) Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Film packaging 3 4.1 Requirement 3 4.2 Roll Film 3 4.3 Loose sheets and slides 3 5 Storage equipment 4 6 Storage Room 4 6.1 Medium-term storage room 4 6.2 Long-term storage room 5 7 Environmental Conditions 5 7.1 Humidity and temperature range 5 7.2 Environmental control requirements 7 7.3 Air Purity 8 7.4 Light 8 8 Fireproof Storage 8 9 Film identification, processing and inspection 9 9.1 Identification 9 9.2 Processing 9 9.3 Inspection 9 Appendix A (Informative) The Difference Between Storage Copy and Working Copy 10 Appendix B (Informative) Advantages and Disadvantages of Protective (Sealed) Packaging 11 Appendix C (Informative) Entrained Air and Gaseous Impurities 12 Appendix D (Informative) Storage Humidity 13 Appendix E (Informative) Storage Temperature 14 Appendix F (Informative) Relationship between temperature and relative humidity 15 Appendix G (Informative) Microenvironment 17 Appendix H (Informative) Silver Image Deterioration 18 Appendix I (Informative) Fire Protection 19 Reference 20 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 18444-2001 "Storage of processed photographic films". Compared with GB/T 18444-2001, In addition to the integration and editorial changes, the main technical changes are as follows. a) The term and definition of “archival medium” (see 3.1 of the.2001 edition) have been deleted, and the terms “macro-environment” and “micro-environment” have been added. and definitions (see 3.6, 3.8), and changed the definitions of the terms "long-term storage conditions", "expected life", and "safety photo film" (see 3.2, 3.4, 3.11, 3.3, 3.5, 3.10 of the.2001 edition); b) Added the requirement that “safety photographic films shall comply with the flammability specifications specified in ISO 18906” (see 4.1); c) Added types of plastic packaging suitable for medium-term storage (see 4.3.1); d) Added recommended requirements for the construction of storage cabinets (see Chapter 5); e) Added "Recommended temperature and relative humidity" and modified Table 1 (see 7.1.1, Table 1 of the.2001 edition); f) Added the requirements for the maximum relative humidity of the medium-term storage environment and the requirements for temperature periodic changes within 24 hours (see 7.1.2); g) Added general rules for long-term storage environment (see 7.1.3.1); h) Added methods for controlling the macro-environment and micro-environment (see 7.1.3.2); i) The storage and cleaning methods of films have been changed (see 9.2, 9.2 of the.2001 edition). This document is equivalent to ISO 18911.2010 "Storage of processed safety photographic films for imaging materials". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Photosensitive Materials (SAC/TC102). This document was drafted by. Lucky Film Co., Ltd., Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, and Lucky Medical Technology Co., Ltd. The main drafters of this document are. Liu Qian, Ren Mingshu, Xuan Peng, Zhou Shuyun, Sun Chenghua, Zhao Liang, and Sun Jibin. The previous versions of this document and the documents it replaces are as follows. ---First published in.2001 as GB/T 18444-2001; ---This is the first revision.introductionPhotographic film is an important recording and graphic material, and it is recognized that it needs to be protected by the law, science, industry, art and historical value. Archives, museums, libraries, governments, businesses and universities all place great importance on preserving these photographic records. to ensure that they have the longest possible lifespan (see references [9][10][11]). Many factors can cause film to age, and these factors can be divided into the following three categories. a) Properties of photographic film The stability of photographic film records depends on the physical and chemical properties of the film. Only safe photographic film is suitable for storage. Specifications for photographic films are given in ISO 18906. For conservation purposes, processed photographic films are classified according to their expected life span, i.e. LE designations, which are specified in the relevant international standards. The term "archival" is no longer used in international standards for imaging materials to indicate long life or stability. It is considered to include everything from “permanent storage of information” (which is not achievable) to “temporary storage but active use of information”. The multiple meanings of “interest”. In order to best preserve the photographic information, use films with high LE numbers and store them under long-term storage conditions. The film material is a polyester-based silver-gelatin type film conforming to ISO 18901.However, this document also applies to processed Color film, diazo film (see ISO 18905), microfoam film (see ISO 18912) and thermally developed silver (see ISO 18919) film Although these types of films may not have high LE ratings, many of them have excellent preservation properties. b) Photographic processing of film ISO 18901 specifies the residual thiosulfate and residual silver compounds for silver-gelatin black and white films according to different LE levels. Highest content. ISO 18905 specifies development tests specific to diazo films. ISO 18912 covers development tests specific to microfoam films and There are two aspects of the residual diazonium salt test. c) Storage conditions The storage conditions for safety photographic film records are of paramount importance for the preservation of the film and are the subject of this document (see also ISO 18906). This environmental condition also applies to nitrate-based films, but it is best to store them in a separate storage area with appropriate fire protection facilities. area (see reference [4]). The important factors affecting the preservation of processed film are humidity, temperature and air pollutants, as well as fire, water, light, fungal growth, insects, Microbial attack, damage from contact with certain solid, liquid or gaseous chemicals, physical damage during handling, and other types of Mutual damage caused by direct contact of films. The temperature, humidity, atmospheric pollutants or their changes beyond the recommended range are allowed without causing harmful effects. The degree of exposure will depend on the duration of exposure, the biological conditions favorable for fungal growth, and the degree of contact of the atmosphere with the emulsion and support. Exposure to high temperatures, especially high humidity, can cause degradation of the film support and emulsion (see references [13][14] [15]), films based on cellulose esters degrade faster than films based on polyesters. There are two levels of storage conditions. 1) mid-term; 2) Long term. Medium-term storage conditions can be used for films that require information preservation for at least 10 years, and long-term storage conditions can be used for most newly processed films. However, long-term storage conditions can extend the life of all films, regardless of type, production, or Since the installation and maintenance costs of each level of storage facilities are different, the degree of storage protection provided is also different. It will be different. When choosing storage conditions, it is usually necessary to consider the limitations of location and storage costs. It is recognized that many facilities may not achieve the low humidity and low temperature levels specified in this document due to reasons of building structure. Such deviations from the specified conditions In such cases, maintaining low humidity and temperature may still be beneficial. This document does not deal with protection against natural or man-made disasters, with the exception of fire and its associated hazards, which are so common that measures may be necessary. Take protective measures. In addition to the provisions of this document, good storage facilities also need to consider the packaging of the files. These are described in ISO 18902 and ISO 18934. There are regulations in it. Image material processed safety photographic film Storage procedures1 ScopeThis document specifies the storage conditions, storage facilities, handling and inspection of processed safety photographic films of all sizes (hereinafter referred to as photographic films). These films may be in the form of rolls, strips, window cards or loose sheets. This document applies to the long-term and medium-term storage of photographic films. This document applies to storage copies of photographic film records that are not actively used. It does not apply to "working" or "use" copies (see Appendix A). While this document is applicable to properly processed material, it is not suitable for materials whose processing conditions are unknown, or which have been toned, retouched, or stabilized. Photographic film that has been marked with materials of uncertain or unknown nature can also be valuable in extending its useful life. This document applies only to safety photographic films (see ISO 18906). Nitrate-based films are not covered by this document. NOTE. Nitrate-based films are hazardous (see Ref. [16]). They require special storage conditions (see Ref. [12]), but are not specified in this document. The environmental conditions are applicable. This document does not apply to photographic papers and photographic plates, as these require different storage conditions, as detailed in ISO 18920 and ISO 18921, respectively. Described in ISO 18918.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. ISO 18902 Imaging materials - Processed imaging materials - Albums, frames and storage materials ISO 18906 Imaging materials - Photographic films - Safety films Note. GB/T 7430-2012 Imaging materials - Photographic films - Specification for safety films (ISO 18906.2000, IDT) ISO 18916 Imaging materials - Processed imaging materials - Tests for photographic activity of packaging materials3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 duplicate A reproduction of an original, retaining the same characteristics and size as the original. 3.2 Storage conditions suitable for preserving recorded information on most new and properly processed photographic films for up to 500 years. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18444-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 18444-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18444-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18444-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18444-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18444-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
