GB/T 18167-2008 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18167-2008: Specification of amusement rides shooting category Status: Valid GB/T 18167: Historical versions
Basic dataStandard ID: GB/T 18167-2008 (GB/T18167-2008)Description (Translated English): Specification of amusement rides shooting category Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y57 Classification of International Standard: 97.200.40 Word Count Estimation: 7,757 Date of Issue: 2008-11-12 Date of Implementation: 2009-05-01 Older Standard (superseded by this standard): GB 18167-2000 Quoted Standard: GB/T 2828.1; GB 8408-2008; JB/T 5000.12-1998 Regulation (derived from): National Standard Approval Announcement 2008 No.19 (Total No.132) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the class of optoelectronic shooting amusement technical conditions and technical requirements. This standard applies to the design of optical targeting class amusement, manufacturing, installation, transformation, maintenance, trial, inspection and use of management (hereinafter referred to as photovoltaic shooting). GB/T 18167-2008: Specification of amusement rides shooting category---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Specification of amusement rides shooting category ICS 97.200.40 Y57 National Standards of People's Republic of China Replacing GB 18167-2000 Photoelectric shooting class amusement general technical conditions Posted 2008-11-12 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB 18167-2000 "photoelectric shooting class amusement general technical conditions." This standard compared with GB 18167-2000, the main changes are as follows. --- In Chapter 1, "scope", the clear photoelectric shooting class amusement design, manufacture, installation, alteration, repair, testing, inspection and make Use management; --- Increased Chapter 5, "drives"; Chapter 6, "Electrical and Control Systems"; Chapter 7, "Manufacturing and installation"; --- The original "technical requirements" was changed to Chapter 4, "Basic design requirements," adds calculation and design program design requirements; --- In Chapter 6, "electrical and control system," the main additions and modifications to the power supply system requirements; --- In Chapter 9, "Inspection Rules" in the re-adjusted some product defect content. This standard by the national ropeway, amusement and recreational facilities and Standardization Technical Committee centralized. This standard was drafted. National ropeway, amusement and recreational facilities Standardization Technical Committee, China Special Equipment Inspection and Research Institute. The main drafters of this standard. ROCKETS, Zhang Yong, Zhe Wang Qi, Cao Yuting, Zhang Yang and so on. This standard replaces the standards previously issued as follows. --- GB 18167-2000. Photoelectric shooting class amusement general technical conditions1 ScopeThis standard specifies the photoelectric shooting class amusement of the technical specifications and requirements. This standard applies to photoelectric shooting class amusement design, manufacture, installation, alteration, repair, testing, inspection and usage management (hereinafter referred to as Photoelectric shooting).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT) GB 8408-2008 Safety specifications rides JB/T 5000.12-1998 Heavy mechanical general techniques and painting3 General3.1 Optical Targeting refers to a signal, sound, lighting, digital displays, and mechanical action, target, shooting with each other and form a similar tour Arts machine. 3.2 Optical targeting the design, manufacture, installation, alteration, repair, testing, inspection and use of management, should be implemented this standard and GB 8408-2008 Registration with the relevant provisions. 3.3 Optical targeting the design, manufacture, installation, use should ensure personal safety. Other Requirements 3.4 standard not mentioned, should be implemented by the relevant national standards and regulations.4 Basic design requirements4.1 Optical design targeting should design specifications, design calculations, safety analysis and compliance with the relevant national standards for a full set of design drawings. 4.2 Optical targeting should be designed to calculate the correct, reasonable structure, to ensure the safety of tourists. 4.3 Optical design targeting procedures, material and pictures should be fun, healthy, reasonable and non-with terror, violence, gambling, pornography and other violations of State The relevant provisions of the design content. 4.4 standard electrical and mechanical equipment selection should be reasonable, and should have certificate; non-standard electrical and mechanical equipment should be used after the quality inspection departments. 4.5 Optical Targeting should provide its machine and the main components of design life, whole life is not less than 23000h.5 Transmission5.1 GB drive system should be designed to comply with the provisions of 5.1 and 5.2 in 8408-2008. 5.2 mechanical transmission part of the design should be consistent with the relevant provisions of GB 8408-2008 5.3. 5.3 Design of hydraulic and pneumatic systems should comply with the relevant provisions of GB 8408-2008 5.4. 5.4 Transmission should be designed to ensure smooth and reliable. When the machine runs allowed abnormal vibration, shock, heat, sound and seizure phenomenon.6 electrical and control system6.1 electrical system shall comply with the relevant provisions of GB 8408-2008 6.1. ...... |
