GB/T 18003-2024 English PDFUS$1419.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18003-2024: Wood based panel machinery - Types organization method Status: Valid GB/T 18003: Historical versions
Basic dataStandard ID: GB/T 18003-2024 (GB/T18003-2024)Description (Translated English): Wood based panel machinery - Types organization method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B97 Classification of International Standard: 79.120 Word Count Estimation: 70,741 Date of Issue: 2024-03-15 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 18003-1999 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 18003-2024: Wood based panel machinery - Types organization method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 79.120 CCSB97 National Standards of People's Republic of China Replace GB/T 18003-1999 Method for compiling model of wood-based panel machinery and equipment Released on 2024-03-15 2024-10-01 Implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 18003-1999 "Method for compiling models of wood-based panel machinery and equipment" and is consistent with GB/T 18003-1999. In addition to structural adjustments and editorial changes, the main technical changes are as follows. a) Added terms and definitions (see Chapter 3); b) The model indication method has been changed (see Chapter 4, 2.1 of the.1999 edition); c) Added 5 categories of equipment. slab pretreatment equipment, surface quality inspection equipment, glue and additive mixing equipment, coating processing equipment, and auxiliary equipment (see Table 1); d) The stacker-destacker category has been deleted (see Table 1 of the.1999 edition); e) Changed the names of some categories, changing the trimming machine category to the board cutting machine category, the hole repair machine category to the single board repair machine category, and the separator category Changed to gas-solid separation device category (see Table 1, Table 1 of the.1999 edition); f) Changes have been made to merge some categories, merging the container category and the concentration regulator category into the glue and additive preparation equipment category (see Table 4,.1994 edition). Table 2); g) Changed some categories to groups, adjusted the impregnation dryer category to the secondary processing equipment group, and changed the name to impregnation dryer group; The six categories of processing equipment, panel splitters, loaders and unloaders, lifting platforms, weighing scales, and sharpeners were adjusted to the auxiliary equipment category, and the group name was changed to Heat treatment equipment, humidifiers, board separators, loaders, unloaders, lifting tables, metering devices, knife sharpeners; electromagnetic vibrators and magnetic The category of magnetic separation devices is adjusted to the group of other categories, and the group name is electromagnetic vibrator and magnetic separation device (see Table 4, Table 2 of the.1999 edition); h) The group, series codes and main parameters of wood-based panel machinery and equipment have been changed (see 4.4, 4.5, 4.7, 2.3 of the.1999 edition); i) Added characteristic codes for wood-based panel machinery (see 4.6). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the State Forestry and Grassland Administration. This document is under the jurisdiction of the National Technical Committee for Standardization of Wood-Based Panel Machinery (SAC/TC66). This document was drafted by. Northeast Forestry University, Shanghai Wood-Based Panel Machinery Co., Ltd., Guangzhou Hongya CNC Machinery Co., Ltd., Nanjing Forestry University, Beijing Forestry University, Research Institute of Wood Industry, Chinese Academy of Forestry. The main drafters of this document are. Hu Wanming, Yang Chunmei, Yan Chenglin, Li Shaokun, Li Li, Wang Baojin, Xu Yang, Zhang Zhaohao, Dai Dali, Wang Jincong, Cao Youwei, Liu Fenghua, Yang Liangsheng, Xue Bo, Jiao Guochang, Liu Zixin, and Wang Xinxu. The previous versions of this document and the documents it replaces are as follows. ---First published in.1999 as GB/T 18003-1999; ---This is the first revision. Method for compiling model of wood-based panel machinery and equipment1 ScopeThis document describes the method for compiling models of wood-based panel machinery and equipment. This document is applicable to all types of wood-based panel machinery and equipment.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 18263 Terminology for mechanical hot presses for wood-based panels LY/T 1382 Classification terminology for wood-based panel machinery3 Terms and definitionsThe terms and definitions defined in GB/T 18263 and LY/T 1382 apply to this document.4 Model indication method4.1 Model composition and meaning The model composition and meaning of wood-based panel machinery and equipment are shown in Figure 1. Note. “□” represents uppercase Chinese phonetic letters; “△” represents Arabic numerals; when there is no second main parameter in the model, “/” is omitted. Figure 1 Model composition and meaning 4.2 Codes of wood-based panel machinery and equipment The code for wood-based panel machinery and equipment is represented by the Chinese pinyin letter B. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18003-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 18003-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 18003-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18003-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 18003-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18003-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
