GB/T 17934.4-2022 English PDF

US$384.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17934.4-2022: Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 4: Publication gravure printing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 17934.4-2022	384	Add to Cart	4 days	Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 4: Publication gravure printing	Valid

Similar standards

WB/T 1120   GB/T 36088   GB/T 26992   GB/T 17934.6   GB/T 17934.2   GB/T 17934.3   

Basic data

Standard ID: GB/T 17934.4-2022 (GB/T17934.4-2022)
Description (Translated English): Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 4: Publication gravure printing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A17
Classification of International Standard: 37.100.01
Word Count Estimation: 22,235
Date of Issue: 2022-10-14
Date of Implementation: 2022-10-12
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 17934.4-2022: Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 4: Publication gravure printing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Graphic technology -- Process control for the production of half-tone colour separations, proof and production prints -- Part 4.Publication gravure printing ICS 37.100.01 CCSA17 National Standards of People's Republic of China Printing technology halftone color separations, proofs and Process control for producing printed matter Part 4.Publishing Gravure (ISO 12647-4.2014, IDT) Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 4 of GB/T 17934 "Printing Technology Mesh Color Separation Plates, Proofs and Process Control of Production Printed Matters" point. GB/T 17934 has published the following parts. --- Part 1.Parameters and measurement methods; --- Part 2.Lithographic offset printing; --- Part 3.Newsprint coldset offset lithography; --- Part 4.Publishing gravure; --- Part 5.Screen printing; --- Part 6.Flexographic printing; --- Part 7.Proofing process using digital data directly; --- Part 8.Verification print production process using digital data directly. This document is identical to ISO 12647-4.2014 "Printing Technology Screen Tone Color Separation Plates, Proofs and Process Control of Production Printed Matters" Part 4.Publishing Gravure. The following minimal editorial changes have been made to this document. --- Added the Chinese names of commonly used substrates and their corresponding English abbreviations. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Printing Standardization Technical Committee (SAC/TC170). This document is drafted by. Shanghai Tobacco Packaging and Printing Co., Ltd., Shanghai Publishing and Printing College, Guangdong Xintianli Holdings Co., Ltd. Company, Guizhou Xiniuwang Printing Co., Ltd., Shenzhen Printing Industry Association, Liaocheng City Product Quality Supervision and Inspection Institute, Central Propaganda Department Publishing Products Quality Supervision and Testing Center, Beijing Institute of Graphic Printing, Changde Jinpeng Printing Co., Ltd., Esso Standardization Service (Shandong) Co., Ltd., Yiheng (Weihai) Information Technology Consulting Service Co., Ltd., Guangdong Xinhongze Packaging Co., Ltd. The main drafters of this document. Wang Lei, He Xiaohui, Tian Quanhui, Chen Xuchao, Chen Guangxue, Ou Liguo, Chen Yuxin, Zhang Yongdong, Fan Haifeng, Wang Fang, Wang Wei, Liu Tao, Fu Xiuke.

Introduction

This document lists the main process parameter values or parameter value groups as defined in ISO 12647-1, and the relevant gravure printing technical characteristics of the product. Where deemed useful, secondary parameters are also specified. This document is part 4 of GB/T 17934 "Printing Technology Mesh Color Separation Plates, Proofs and Process Control of Production Printed Matters" point. GB/T 17934 is intended to consist of eight parts. --- Part 1.Parameters and measurement methods; --- Part 2.Lithographic offset printing; --- Part 3.Newsprint coldset offset lithography; --- Part 4.Publishing gravure; --- Part 5.Screen printing; --- Part 6.Flexographic printing; --- Part 7.Proofing process using digital data directly; --- Part 8.Verification print production process using digital data directly. The purpose of this section is to. --- List and explain the visual characteristics and related technical characteristics of the mesh proofs produced from the digital data or the production prints required for Minimum process parameters; --- Give definitions of common terms necessary for process control; --- Describe the measurement method and the requirements for reporting the results. The purpose of proofing is to visually simulate the visual characteristics of the final print as closely as possible. To visually match a specific Prints, proofing offline or requiring a different solid color and tone increase than the printing process it simulates, due to factors such as gloss, light scattering (inside the substrate or colorant), metamerism, and transparency. These differences are likely a consequence of this offline proofing process The prints, colourants and techniques used are significantly different from those used in gravure printing, in which case the user or supplier should ensure that appropriate correction method. Another problem is digital offline proofs on opaque, low basis weight printing paper used in publishing gravure. Match between duplex prints. If deemed necessary, use substrate-based backing measurements instead of black backing for image quality reasons Proofs of measured color management profiles, there will be unavoidable differences between proofs and prints. This situation needs to be related to All parties communicate. Printing technology halftone color separations, proofs and Process control for producing printed matter Part 4.Publishing Gravure

1 Scope

This document specifies some process parameters and parameter values for four-color publishing gravure. The selection of these parameters and parameter values is based on the entire Process, including color separation, plate making, proofing and all stages of printing production. This document. --- Directly applicable to gravure publications, including magazines, catalogues and commercial materials; ---It is directly applicable to the halftone tone or continuous tone proofing which indicates the color effect of gravure printing; --- Comparability is applicable to four-color (printing basic color) gravure packaging printing. This document is not directly applicable to the relevant digital input data and cylinder engraving data, and/or necessary for the proofing process. convert.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. ISO 8254-1 Measurement of specular gloss of paper and board - Part 1.75° gloss converging beam, TAPPI method (Paper od) Note. GB/T 8941-2013 Determination of specular gloss of paper and cardboard (ISO 8254-1.2009, ISO 8254-3.2004, MOD) ISO 12639 Printing Technology Prepress Data Interchange Label Image File Format for Graphic Technology (TIFF/IT) [Graphic Note. GB/T 22113-2008 Printing Technology Prepress Data Interchange Label Image File Format for Image Technology (TIFF/IT) (ISO 12639. 2004, IDT) Input data for ISO 12642-2 Printing technology Four-color printing characterization part 2.Extended data set (Graphictech- ISO 12647-1 Printing technology - Process control for halftone separations, proofs and production prints - Part 1.Parameters and Note. GB/T 17934.1-2021 Printing Technology Screen Tone Color Separation Plates, Proofs and Process Control of Production Printed Matters Part 1.Parameters and Measurements Method (ISO 12647-1.2013, IDT) ISO 12647-7 Printing technology - Process control of halftone separations, proofs and production prints - Part 7.Direct use Note. GB/T 17934.7-2021 Printing Technology Mesh Tone Color Separation Plates, Proofs and Process Control of Production Printed Matters Part 7.Direct Use Data Proofing process of word data (ISO 12647-7.2016, IDT) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17934.4-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17934.4-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17934.4-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17934.4-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.