GB/T 17626.7-2017 English PDFUS$644.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17626.7-2017: Electromagnetic compatibility -- Testing and measurement techniques -- General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto Status: Valid GB/T 17626.7: Historical versions
Basic dataStandard ID: GB/T 17626.7-2017 (GB/T17626.7-2017)Description (Translated English): Electromagnetic compatibility -- Testing and measurement techniques -- General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L06 Classification of International Standard: 33.100.10; 33.100.20 Word Count Estimation: 34,376 Date of Issue: 2017-07-12 Date of Implementation: 2018-02-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 17626.7-2017: Electromagnetic compatibility -- Testing and measurement techniques -- General guide on harmonics and inter-harmonics measurements and instrumentation, for power supply systems and equipment connected thereto---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Electromagnetic compatibility - Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected ICS 33.100.10; 33.100.20 L06 National Standards of People's Republic of China Replacing GB/T 17626.7-2008 Electromagnetic compatibility test and measurement technology Power supply system and connected equipment harmonics, Guidelines for measurement and measurement of harmonics instrumentation, forpowersupplysystemsandequipmentconnectedthereto [IEC 61000-4-7..2009, Electromagneticcompatibility (EMC) - Part 4-7. Testingandmeasurementtechniques-Generalguide forpowersupplysystemsandequipmentconnectedthereto, IDT] 2017-07-12 release.2018-02-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 3.1 Definition of frequency analysis 2 3.2 Definition of Harmonics 3 3.3 Definition of distortion factor 4 3.4 Definition of Interharmonics 5 3.5 Symbol 6 3.5.1 Symbols and Abbreviations 6 3.5.2 subscript 6 Common concepts and common requirements of various types of measuring instruments 7 4.1 Characteristics of the measured signal 7 4.2 Accuracy of the instrument Level 7 4.3 Type of measurement 7 4.4 General architecture of the instrument 7 4.4.1 The main part of the instrument 4.4.2 post-processing section 9 5 Harmonic measurement 9 5.1 Current input circuit 9 5.2 voltage input circuit 9 5.3 Accuracy requirements 10 5.4 Measurement arrangement and supply voltage 11 5.4.1 Measurement arrangement for emission evaluation 11 5.4.2 Supply voltage used in the emission evaluation 12 5.4.3 Power of the equipment 13 Evaluation of Harmonic Emission 13 5.5.1 Grouping and Smoothing 13 5.5.2 Compliance of emission limits 15 Evaluation of voltage harmonic subgroups Other analytical principles 7 transition period 15 8 Overview 16 Appendix A (informative) Measurement of harmonics 17 Appendix B (informative) Measurement of harmonic frequencies up to 9 kHz APPENDIX C (INFORMATION APPENDIX) Technical Factors Considered by Hierarchical Approach 23 Reference 30 ForewordGB/T 17626 "Electromagnetic compatibility test and measurement technology" series of standards currently includes the following parts. Electromagnetic compatibility (EMC) - Test and measurement techniques - Tests for immunity test; GB/T 17626.1-2006; Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test; GB/T 17626.2-2006; Electromagnetic compatibility - Testing and measurement techniques - Radiofrequency electromagnetic field radiation immunity test; GB/T 17626.3-2006; Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrical fast transient burst immunity test; GB/T 17626.4-2008; Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test; GB/T 17626.5-2008; Electromagnetic compatibility (EMC) - Testing and measurement techniques - Radio disturbance - induced conducted disturbance immunity; Quantities and measuring instruments; Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test; GB/T 17626.8-2006; GB/T 17626.9-2011 Electromagnetic compatibility test and measurement techniques - Pulse magnetic field immunity test; Electromagnetic compatibility - Test and measurement techniques - Damping oscillations - Magnetic field immunity test; GB/T 17626.10-1998; --- GB/T 17626.11-2008 Electromagnetic compatibility test and measurement technology Voltage sags, short interruptions and voltage variations Disturbance test Electromagnetic compatibility - Testing and measurement techniques - Oscillographic wave immunity test; GB/T 17626.12-2013; GB/T 17626.13-2006 Electromagnetic compatibility test and measurement technology AC power port Harmonics, interharmonics and power networks Low frequency immunity test; Electromagnetic compatibility - Testing and measurement techniques - Voltage fluctuation immunity test; GB/T 17626.14-2005; Electromagnetic compatibility - Testing and measurement techniques - Scintillator functions and design specifications; GB/T 17626.15-2011; GB/T 17626.16-2007 Electromagnetic compatibility test and measurement technology 0Hz ~ 150kHz Common mode conducted disturbance disturbance immunity test; Electromagnetic compatibility - Testing and measurement techniques - DC power input - port ripple immunity test; GB/T 17626.17-2005; Electromagnetic compatibility test and measurement techniques - Transmissive and immunity in transverse electromagnetic wave (TEM) waveguides GB/T 17626.20-2014 Degree test Electromagnetic compatibility test and measurement techniques - Mixing chamber test method; GB/T 17626.21-2014; GB/T 17626.24-2012 Electromagnetic compatibility test and measurement technology HEMP conducted harassment protection device test method; Electromagnetic compatibility - Testing and measurement techniques - Three - phase voltage unbalance immunity test; GB/T 17626.27-2006; Electromagnetic compatibility (EMC) - Test and measurement techniques - Frequency immunity - Frequency immunity test; --- GB/T 17626.29-2006 Electromagnetic compatibility test and measurement technology DC power input port voltage sag, short time Breaking and voltage changes in the immunity test; Electromagnetic compatibility - Testing and measurement techniques - Power quality measurement methods; GB/T 17626.30-06; --- GB/T 17626.34-2012 Electromagnetic compatibility test and measurement technology Main power supply per phase current greater than 16A Pressure drop, short interruptions, and voltage variations immunity test. This part is part 7 of GB/T 17626. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 17626.7-2008 "Electromagnetic compatibility test and measurement technology Power supply system and connected equipment Harmonics, harmonics Guidelines for Measuring and Measuring Instruments for Wave ". This section compares with GB/T 17626.7-2008, except for editorial changes, the main technical changes as follows. --- Added references to IEC 60038, IEC 61000-2-2 and IEC 61000-3-12 (see Chapter 2); - the definition of "the definition of frequency analysis", "the definition of harmonics", "the definition of the distortion factor", the " (See Chapter 3), the parameters of the other chapters are modified accordingly; --- modified the characteristics of the measured signal (see 4.1); - modified the time window and the weighted requirements, modified the general structure of the measuring instrument (see 4.4.1); - Modifications to the accuracy requirements for current, voltage and power measurements (see 5.3); - Increases the supply voltage for transmission evaluation with input current greater than 16A and less than or equal to 75A per phase (see 5.4); - modified harmonic emission assessment, voltage harmonic subgroup evaluation requirements (see 5.5 and 5.6); - modified the requirements and description of the transition period (see Chapter 7); --- Modification of interharmonic measurement requirements (see Appendix A); - The measurement requirements for signals with frequencies below 9 kHz and higher than harmonics are modified (see Appendix B). This part uses the translation method equivalent to IEC 61000-4-7..2009 "Electromagnetic compatibility (EMC) Part 4-7. Test and measurement techniques Power supply system and connected equipment harmonics, interharmonics measurement and measurement equipment guide ". In this part of the normative reference to the international documents have a consistent correspondence between the following documents. --- GB/T 156-2007 standard voltage (IEC 60038..2002, MOD) GB/T 4365-2003 Electrotechnical terminology Electromagnetic compatibility (IEC 60050-161..1990, IDT) GB/T 18039.3-2003 Electromagnetic compatibility environment Common low-voltage power supply system Low-frequency conducted disturbance and signal transmission and Capacity level (IEC 61000-2-2..1990, IDT) --- GB 17625.1-2003 Electromagnetic compatibility limits Harmonic current emission limits (input current per phase ≤ 16A) (IEC 61000-3-2..2001, IDT) --- GB/T 17625.8-2015 Electromagnetic Compatibility Limits Input current per phase greater than 16A Less than or equal to 75A Connected to the public Harmonic current limits (IEC 61000-3-12..2004, IDT) with low voltage system equipment This section makes the following editorial changes. --- for the harmonization of national standards with this series, the standard name of this part to "electromagnetic compatibility test and measurement technology power supply system Harmonization of connected equipment harmonics, inter-harmonic measurement and measurement equipment guide. " This part of the National Electromagnetic Compatibility Standardization Technical Committee (SAC/TC246) proposed and centralized. This part of the drafting unit. China Electric Power Research Institute, China Southern Power Grid EHV transmission company, power grid of Guangdong Electric Power Research Institute, Ministry of Industry and Information Technology, the fifth Institute of Electronics, in recognition of the Thai (Suzhou) Detection Technology Co., Ltd., State Grid Hunan Electric Power Company Academy. This part of the main drafters. Pei Chunming, Wan Baoquan, Li Ni, Li Shipen, Xiao Yao, Mei Guihua, Yin Ting, Zhu Wenli, Hu Luoquan, Tao Li. This part of the standard to replace the previous version of the release. GB/T 17626.7-1998, GB/T 17626.7-2008. Electromagnetic compatibility test and measurement technology Power supply system and connected equipment harmonics, Guidelines for measurement and measurement of harmonics1 ScopeThis part of GB/T 17626 is suitable for measuring the spectral component superimposed on the fundamental of 50Hz or 60Hz power system (highest 9kHz) measuring instruments. From the practical application considerations, this part of the signal is divided into harmonics, interharmonics and other higher than the harmonic range but lower than 9kHz component. This section specifies the limits of the emission limits that may be used in accordance with the emission limits given in certain standards (eg IEC 61000-3-2) Value) to test the equipment by item, as well as the actual power supply system in the harmonic current and voltage measurement of the instrument. Above the harmonic frequency 9kHz range of measuring instruments, made a temporary provision (see Appendix B). Intercussion generation and measurement, as well as special measurement methods for the temporary (See Appendix C). Note 1. The instruments involved in this section are based on discrete Fourier transforms. Note 2. This section clearly describes the structure and function of the measuring instrument and can therefore be understood literally. This is because no matter what the input signal characteristics are Requires reference to the instrument can be repeated results. Note 3. The specified measuring instrument shall have the ability to measure up to 50 harmonics.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. IEC 60038 standard voltage (Standardvoltages) IEC 60050-161 International Electrotechnical Vocabulary (IEV) Chapter 161. Electromagnetic Compatibility [InternationalElectrotechnicalVocab- ulary (IEV) -Chapter161. Electromagneticcompatibility] IEC 61000-2-2 Electromagnetic compatibility (EMC) - Part 2. Environment - Part 2. Low - frequency transmission of low - voltage Interference compatibility of the signal transmission [Electromagneticcompatibility (EMC) -Part 2. Environment-Section2. Compatibilitylevelsforlow-frequencyconducteddisturbancesandsignalinginpubliclow-voltage powersupplysystems] IEC 61000-3-2 Electromagnetic compatibility (EMC) - Part 3-2. Limiting harmonic current emission limits (input current per phase of the device ≤ 16 A) [Electromagneticcompatibility (EMC) -Part 3-2. Limits-Limitsforharmoniccurrent emissions (equipmentinputcurrent≤16Aperphase)] IEC 61000-3-12 Electromagnetic compatibility (EMC) Section 3-12. Limits (each input current greater than 16A is less than or equal to 75A) The harmonics current limit of the device connected to the common low-voltage system [Electromagneticcompatibility (EMC) -Part 3-12. Lt;/RTI & gt; withinputcurrent > 16Aand ≤ 75Aperphase]3 terms and definitionsIEC 6050-161 (IEV) and the following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17626.7-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 17626.7-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17626.7-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17626.7-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17626.7-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17626.7-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
