GB/T 17249.2-2025 English PDFUS$654.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17249.2-2025: Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures Status: Valid GB/T 17249.2: Historical versions
Basic dataStandard ID: GB/T 17249.2-2025 (GB/T17249.2-2025)Description (Translated English): Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A59 Classification of International Standard: 17.140 Word Count Estimation: 32,328 Date of Issue: 2025-05-30 Date of Implementation: 2025-12-01 Older Standard (superseded by this standard): GB/T 17249.2-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17249.2-2025: Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 17.140 CCSA59 National Standard of the People's Republic of China Replaces GB/T 17249.2-2005 Low-noise workplace design with acoustic machinery Recommended practices Part 2.Noise control measures (ISO 11690-2.2020,IDT) Released on 2025-05-30 2025-12-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Noise Control Technology Overview 1 5 Sound source noise control 2 6 Noise Control in the Transmission Path 7 7 Noise control at work location 10 8 Verification Method 10 9 New Technologies11 Appendix A (Informative) Adjustment and Replacement of Machine Parts 12 Appendix B (Informative) Noise Source Layout 13 Appendix C (Informative) Noise Enclosure 14 Appendix D (Informative) Muffler 16 Appendix E (Informative) Indoor Sound Barriers 17 Appendix F (Informative) Room Sound Absorption Treatment 18 Appendix G (Informative) Structure-borne Noise Isolation 20 Appendix H (Informative) Airborne Noise Isolation 21 Appendix I (Informative) Noise Control at Workplace 22 Appendix J (Informative) New Technology Examples 23 Reference 25ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 2 of GB/T 17249.GB/T 17249 has been published in the following parts. --- Recommended approach for the design of low-noise workplaces for acoustic machinery Part 1.Noise control strategies; --- Recommended design of low-noise workplaces for acoustic machinery Part 2.Noise control measures; --- Acoustics. Guide for design of low noise workplaces. Part 3.Sound propagation and noise prediction in workplaces. This document replaces GB/T 17249.2-2005 "Guidelines for the design of acoustically low-noise workplaces Part 2.Noise control measures". Compared with GB/T 17249.2-2005, this document has only editorial changes. This document is equivalent to ISO 11690-2.2020 "Recommended methods for design of low-noise workplaces for acoustic machinery - Part 2.Noise Noise Control Measures. The following minimal editorial changes were made to this document. --- Deleted the reference to the obsolete ISO 10053 in the informative Appendix E. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the Chinese Academy of Sciences. This document is under the jurisdiction of the National Technical Committee on Acoustic Standardization (SAC/TC17). This document was drafted by. Shenzhen Zhongya Electromechanical Industry Co., Ltd., Shanghai Academy of Environmental Sciences, Institute of Acoustics, Chinese Academy of Sciences, University of Economics, Zhejiang University of Science and Technology, Hefei University of Technology, Shanghai Jiaotong University, Changsha Aobang Environmental Protection Industry Co., Ltd., Shanghai Shenhua Acoustic Equipment Co., Ltd., Institute of Urban Safety and Environmental Sciences, Beijing Academy of Science and Technology, and Anhui Weiwei Shock and Noise Reduction Technology Research Institute. The main drafters of this document are. Fang Qingchuan, Zhu Wenying, Lü Yadong, Tian Jing, Cheng Xiaobin, Mao Dongxing, Yu Wuzhou, Li Zhengguang, Jiang Weikang, Lu Yimin, He Jinlong, Mo Jianyan, Wang Xiaonan, Wu Haijun, Li Xiaokuan, Li Zhiyuan, Li Ji, Xu Xin. The previous versions of this document and the documents it replaces are as follows. ---First published in.2005 as GB/T 17249.2-2005; ---This is the first revision.IntroductionSeveral national standards specify methods for measuring and/or evaluating noise. GB/T 17249 Low-noise workplaces for acoustic machinery The ultimate goal of the Design Recommendations is to reduce noise. This document provides some noise control measures. However, to be fully effective, it is important to select the most appropriate noise control measure for a particular situation. Giving is important. When non-acoustic engineers participate in noise control practice, they need to have a basic understanding of noise emission and propagation characteristics and understand Understand the basic principles of noise control. To assist in the development of noise control in the workplace, it is essential that the information contained in these recommended practices is disseminated through national standards. In order to reduce the noise hazards in the workplace, the state has formulated relevant laws and regulations. Generally, such laws and regulations require the adoption of noise control measures to achieve to the lowest reasonable level of noise emission, noise exposure and noise exposure, taking into account. --- Known available measures; ---The latest level of progress in noise control technology; --- Processing of noise sources; ---Proper planning, procurement and installation of machinery and equipment. GB/T 17249 "Recommended methods for design of low-noise workplaces for acoustic machinery" is intended to consist of three parts. --- Part 1.Noise control strategies. The purpose is to give the basic concepts and basic strategies of noise control; --- Part 2.Noise control measures. The purpose is to provide basic technical measures for noise control and their evaluation and verification methods; --- Part 3.Sound propagation and noise prediction in the workplace. The purpose is to give the sound propagation in the workplace and the sound pressure level in the workplace and prediction methods for noise exposure. This document, together with the other two parts, outlines the procedures to be considered when dealing with noise control in workplaces, workrooms and open air environments. These recommendations provide a relatively simple approach to all parties involved in workplace noise control and the design of low-noise workplaces. The basic information necessary to facilitate the understanding of the required noise control requirements is provided. The purpose of the GB/T 17249 series is to bridge the gap between existing noise control literature and the implementation of noise control measures. The series is suitable for all workplaces, its main functions are. --- Provide simple and concise information on some aspects of noise control in the workplace; --- Serves as a guide to help understand the requirements in standards, directives, textbooks, manuals, reports and other professional and technical documents; --- Provide assistance in decision making when evaluating the various available measures. GB/T 17249 series is for factory personnel, health and safety officers, engineers, managers, planning and procurement department staff, architects and engineers. However, the above parties need to pay attention to complying with the GB/T 17249 series recommendations and Not all that is necessary to create a safe workplace. The impact of noise on health, well-being and human activities is multifaceted. The GB/T 17249 series provides noise control strategies and Guidance on measures to reduce the impact of noise on people in the workplace. The assessment of the impact of noise on people is dealt with in other documents. Low-noise workplace design with acoustic machinery Recommended practices Part 2.Noise control measures1 ScopeThis document covers various technical aspects of workplace noise control, including different technical measures, acoustic evaluation quantities, noise reduction quantities and Its verification method. This document deals with audible sounds only.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 17249.1-2025 Recommended methods for designing low-noise workplaces for acoustic machines Part 1.Noise control strategies (ISO 11690-1.2020,IDT)3 Terms and definitionsThe terms and definitions defined in GB/T 17249.1-2025 apply to this document. The terminology databases used for standardization maintained by ISO and IEC are located at. 4.Overview of Noise Control Technology Noise reduction measures can be taken at the sound source (sound emission), between the sound source and the receiver (transmission path), and at the work location (receiver). (See Figure 1). Figure 1 Basic principles of noise control When reducing noise emissions from machine operation, installation methods and production processes, all possible noise reduction measures should be considered (see Chapter 5 and GB/T 17249.1-2025). To determine whether noise emissions have been reduced to the lowest practicable level, it is necessary to The noise emission value of the machine equipment is given by its noise emission indication value (see GB/T 17249.1-2025 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17249.2-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 17249.2-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17249.2-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17249.2-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17249.2-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17249.2-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
