GB/T 16900-2008 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 16900-2008: Rules for the presentation of graphical symbols -- General principles Status: Valid GB/T 16900: Historical versions
Basic dataStandard ID: GB/T 16900-2008 (GB/T16900-2008)Description (Translated English): Rules for the presentation of graphical symbols -- General principles Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A22 Classification of International Standard: 01.080.01 Word Count Estimation: 7,799 Date of Issue: 2008-07-16 Date of Implementation: 2009-01-01 Older Standard (superseded by this standard): GB/T 16900-1997 Regulation (derived from): Announcement of Newly Approved National Standards No. 12 of 2008 (No. 125 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the classification of graphical symbols, standardized procedures, which means that the rules, the design requirements and registration and other basic requirements. This standard applies to technical documentation, equipment and flags fields graphical symbols design, especially the design of standard graphic symbols. GB/T 16900-2008: Rules for the presentation of graphical symbols -- General principles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Rules for the presentation of graphical symbols. General principles ICS 01.080.01 A22 National Standards of People's Republic of China Replacing GB/T 16900-1997 Graphical notation rules General Posted 2008-07-16 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Category 1 5 1 standardized procedures 6 shows Rule 2 Meaning 2 6.1 6.2 Name 2 6.3 Expressions 2 7 design requirements 2 7.1 General requirements 2 7.2 configuration 3 7.3 Combination 3 7.4 Negative 3 7.5 Test 3 8 3 registration Table 1 different types of graphical symbols manifestation 2ForewordGB/T 16900 series of standards is one of the national "rules of graphical symbols." The national standards for structure and names are as follows. a) GB/T 16900 "General Rules of graphical symbols." b) GB/T 16901 "technical document indicates that the rule of graphical symbols", divided into three sections. --- Part 1. Basic rules; --- Part 2. Graphical symbols (including the reference library of graphic symbols) in a computer file format specification and post Change requirements; --- Part 3. connection point, networks and their encoding. c) GB/T 16902 "device graphical notation rules" is divided into the following four parts. --- Part 1. prototype symbol; --- Part 2. Form and use of arrows; --- Part 3. Guidelines for the application; --- Part 4. Monitor screen and the applicable rules of graphical symbols (icons) of. d) GB/T 16903 "flag graphical notation rules" is divided into two parts. --- Part 1. Public information graphical symbols design principles; --- Part 2. Test procedure. This standard replaces GB/T 16900-1997 "General Rules of graphical symbols," compared with the GB/T 16900-1997 major changes as follows. --- Graphic symbol classification were adjusted, the device uses graphic symbols to add "icon" symbol deleting "package store graphical symbols Yun flag with the symbol "(see 4.2 and 4.3; 1997 version 4.2 and 4.3); --- The related "designer" requirement was changed to "standardized procedure" (see Chapter 5; Chapter 5 of the 1997 edition); --- On the "meaning" for the enhancement and adjustment from the "design" in the "presentation rules" (see Chapter 6; 1997 edition Chapter 6); --- Increase related to the "Name" requirement (see Chapter 6); --- On the "negative", "combination" requirement was to enrich and adjust it from the "design" in the "Design Requirements" (see Chapter 7; Chapter 6 of the 1997 edition); --- Relevant "configuration" requirements were substantial (see Chapter 7; Chapter 6 of the 1997 edition); --- Information about the "Symbol elements" and "test" requirements (see Chapter 7) in the design of graphical symbols. The standard graphic symbol by the National Standardization Technical Committee (SAC/TC59) and focal points. This standard drafting units. China National Institute of Standardization, Mechanical Science Research Institute. The main drafters of this standard. a white house, Zouzhuan Yu, Yang worship, Guo Ting, Zhang Liang, Chen rights. Original standard was first released in 1986 (Standard No. GB \u200b\u200b/ T 7093.1-1986), 1997 First Amendment standard number change Of GB/T 16900-1997, this is the second revision. Graphical notation rules General1 ScopeThis standard specifies the classification of graphic symbols, standardized procedures, represents the basic requirements of the rules, requirements and design registration and so on. This standard applies to technical documentation, equipment and signs in areas such as graphic symbol design, especially the design standard graphical symbols.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 15565.1 Graphical symbols - Terminology - Part 1. General GB/T 16901 (all parts) technical documentation indicates that the rule of graphical symbols GB/T 16902 (all parts), Graphical symbols equipment rules GB/T 16903 (all parts) mark indicates that the rule of graphical symbols3 Terms and DefinitionsGB/T 15565.1 defined and the following terms and definitions apply to this standard. 3.1 Graphic symbols to convey information. Category 4 Graphical symbols according to their application areas are divided into. a) Graphical symbols for technical product documentation, including. --- Schematic symbol. indicates that the system or device each component part of the relationship between the schematic; --- Marked by the symbol. represents the geometric characteristics (such as ruler in product design, manufacturing, measurement and quality assurance of the whole process involved in Inch, distance, angle, shape, position, orientation, etc.) and manufacturing processes. b) equipment graphic symbols, including. --- Display symbols. the rendering device functions (eg. connection terminals, filling points, etc.) or work status (such as. on, off, on, off, Alarms, etc.); --- Control symbol. as the operating instructions; --- Icon. presented on the screen or monitor, as the instructions for use. c) signs with graphic symbols, including. --- Public information graphical symbols. transmission of information to the public, without professional training or training to understand; --- Safety symbols. safety and security, color and shape together form safety signs to transmit security information; --- Traffic sign. the color and geometry together form the traffic signs to passing traffic safety and management information.5 standardized proceduresIn the design of graphical symbols and their standardization should follow the following procedure. a) Survey Demand. Survey objective information needs to be delivered, and the argument is really necessary to pass information graphical symbols; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16900-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16900-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 16900-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16900-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 16900-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16900-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
