GB/T 16252-2023 English PDF

US$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16252-2023: Hand sizing system of adults
Status: Valid

GB/T 16252: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 16252-2023	269	Add to Cart	3 days	Hand sizing system of adults	Valid
GB/T 16252-1996	559	Add to Cart	3 days	Hand sizing system. Adult	Obsolete

Similar standards

GB/T 5703   GB/T 10000   GB/T 36606   GB/T 45285   GB/T 16251   

Basic data

Standard ID: GB/T 16252-2023 (GB/T16252-2023)
Description (Translated English): Hand sizing system of adults
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A25
Classification of International Standard: 13.180
Word Count Estimation: 14,160
Date of Issue: 2023-08-06
Date of Implementation: 2024-03-01
Older Standard (superseded by this standard): GB/T 16252-1996
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 16252-2023: Hand sizing system of adults

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.180 CCSA25 National Standards of People's Republic of China Replace GB/T 16252-1996 Adult hand size classification Published on 2023-08-06 2024-03-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Hand size parting settings 2 4.1 Type representation method 2 4.2 Hand size classification 2 5 Control part size 3 6 Application of hand size classification 4 Appendix A (Informative) Distribution coverage of hand length and hand width5 Appendix B (informative) Schematic diagram of hand measurement items 6 Appendix C (Normative) Mean and standard deviation of basic hand dimensions7 Reference 8

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1 Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 16252-1996 "Adult Hand Size". Compared with GB/T 16252-1996, except for structural adjustment and compilation In addition to editorial changes, the main technical changes are as follows. ---In "Terms and Definitions", "palm circumference", "palm length", "thumb length", "index finger length", "middle finger length", "ring finger length", "little finger length" and "thumb length" are added. "Finger width", "index finger proximal width", "index finger distal width" and "palm thickness", deleted "hand size" and "control site" (see Chapter 3,.1996 Chapter 3 of the annual edition); ---Added "type representation method" (see 4.1); ---Set the coverage rate of hand segmentation from "not less than 5‰" to "not less than 0.1%" (see 4.2.1, 4.2 of the.1996 version); ---Changed all human body size statistics (see Table 1, Table 2, Table 3, Table A.1, Table A.2, Table C.1 and Table C.2,.1996 edition Table 1, Table 2, Table 3, Table A1, Table A8, Table B1 and Table B2); ---The "thumb width" and "index finger distal width" are added to the hand control part (see Table 3); ---Deleted the "tiger's index finger fork distance", "ulnar half-palm width", "thenar width", "thumb joint circumference", "index finger proximal knuckle circumference" and "middle finger proximal “Proximal knuckle circumference of the ring finger”, “Proximal knuckle circumference of the ring finger” and “Proximal knuckle circumference of the little finger” (see Table 3 of the.1996 edition); ---Deleted "Method of expressing hand size" (see Chapter 6 of the.1996 edition); ---Deleted adult men and adults in the Northwest, Southeast, Central China, South China, Southwest, Northeast, and North China regions Coverage rate of women’s hand sizes in.2016 (see Tables A2 to A7 and A9 to A14 of the.1996 version). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and coordinated by the National Ergonomics Standardization Technical Committee (SAC/TC7). This document was drafted by. China Institute of Standardization, Beijing Jinfa Technology Co., Ltd., Shanghai Institute of Work Safety Science, Zhejiang Jiangdongya Gloves Co., Ltd., Tsinghua University, Jiangsu Guojian Testing Technology Co., Ltd., Air Force Medical University Air Force Specialty Medical Center, Chinese Chemical Defense Research Institute of the Academy of Military Sciences of the People's Liberation Army, Suzhou Automotive Research Institute of Tsinghua University (Xiangcheng), Zhongshan Yumin Medical Technology Co., Ltd., Shougang Metropolitan Normal University, Donghua University, University of Science and Technology Beijing, Huayan Huike (Anhui) Intelligent Technology Co., Ltd., Beijing University of Civil Engineering and Architecture, Beijing United University University, Winning Energy Efficiency Technology (Qingdao) Co., Ltd., Northeast Normal University, Winning Energy Efficiency Technology (Beijing) Co., Ltd., SDIC Winning Quality Infrastructure SHI INSTITUTE LIMITED. The main drafters of this document. Ran Linghua, Zhang Xin, Zhao Qichao, Liu Taijie, Zhao Chaoyi, Shang Jinglin, Hu Huimin, Yu Jie, Xu Shucai, Ma Gangliang, Zou Guohua, Zheng Rong, Ma Shuai, Guo Dehua, Lu Bing, Wang Jinchun, Wang Dongmei, Guo Xiaochao, Zheng Xiaohui, Tang Yiming, Wang Zhongting, Zhao He, Zhang Huifen, Song Jiafeng, Niu Jianwei, Qin Hua, Yang Aiping, Xu Hongqi, Li Shaopeng, Xu Shanwei, Gao Junyu, Wei Bo, Yin Jiwei, Wang Jingjing, Qu Zhaoqi, Wu Haimei, Chen Jian, Chu Junpeng, Liu Yuning, Tian Hao. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 16252-1996 in.1996; ---This is the first revision. Adult hand size classification

1 Scope

This document gives the settings for hand size classification for adults (18 to 70 years old), as well as the regression equation for the size of hand control parts. This document applies to the specification design, production and production of manual operating devices, hand tools, gloves and other hand wear and hand protection products. Select.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 5703-2023 Anthropometric basic items for technical design

3 Terms and definitions

The terms and definitions defined in GB/T 5703-2023 and the following apply to this document. 3.1 handgirth The circumference starts from the point of the middle finger, passes through the radial metacarpal point, palm surface, and ulnar metacarpal point to the starting point. 3.2 Palmlength The distance from the line connecting the palmar surface of the radial styloid process and the ulnar styloid process to the palmar surface wrinkle proximal to the middle finger. 3.3 Thumb length thumblength The distance from the tip of the thumb to the proximal curvature of the metacarpophalangeal joint. 3.4 index finger length indexfingerlength The distance from the tip of the index finger to the crease on the proximal palmar surface of that finger. 3.5 Middle finger length fingerⅢlength The distance from the tip of the middle finger to the proximal curve of the metacarpophalangeal joint. 3.6 Ring finger length fingerⅣlength The distance from the tip of the ring finger to the proximal curve of the metacarpophalangeal joint. 3.7 Little finger length fingerⅤlength The distance from the tip of the little finger to the proximal curve of the metacarpophalangeal joint. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 16252-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 16252-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 16252-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 16252-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 16252-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16252-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.