GB/T 15972.30-2021 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15972.30-2021: Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test Status: Valid GB/T 15972.30: Historical versions
Basic dataStandard ID: GB/T 15972.30-2021 (GB/T15972.30-2021)Description (Translated English): Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: M33 Word Count Estimation: 11,119 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 15972.30-2021: Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specifications for optical fibre test methods-Part 30.Measurement methods and test procedures for mechanical characteristics-Fibre proof test ICS 33.180.10 M33 National Standards of People's Republic of China Replace GB/T 15972.30-2008 Optical fiber test method specification part 30. Measurement methods and test procedures of mechanical properties Optical fiber screening test (IEC 60793-1-30.2010, Opticalfibres-Part 1-30.Measurementmethodsand Released on 2021-04-30 and implemented on 2021-11-01 State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee Table of contentsForeword Ⅰ 1 Scope 1 2 Normative references 1 3 Method overview 1 4 Device 2 5 Sample preparation 5 6 Procedure 5 7 Results 5 Reference 7ForewordGB/T 15972 "Specifications for Optical Fiber Test Methods" consists of several parts, and its expected structure and corresponding international standards are. ---Part 10.General principles of measurement methods and test procedures (corresponding to IEC 60793-1-1); ---Part 20~Part 29.Measurement methods and test procedures of dimensional parameters (corresponding to IEC 60793-1-20 to IEC 60793- 1-29); ---Part 30~Part 39.Measurement methods and test procedures of mechanical properties (corresponding to IEC 60793-1-30 to IEC 60793- 1-39); ---Part 40~Part 49.Measurement methods and test procedures of transmission characteristics (corresponding to IEC 60793-1-40 to IEC 60793- 1-49); ---Part 50~Part 59.Environmental performance measurement methods and test procedures (corresponding to IEC 60793-1-50 to IEC 60793- 1-59). Among them, GB/T 15972.3× consists of the following parts. ---Part 30.Measurement methods and test procedures of mechanical properties, optical fiber screening test; ---Part 31.Measuring methods of mechanical properties and test procedures for tensile strength; ---Part 32.Measurement methods and test procedures for mechanical properties, coating peelability; ---Part 33.Measurement methods of mechanical properties and test procedures for stress corrosion sensitivity parameters; --- Part 34.Measurement methods and test procedures for mechanical properties of optical fiber warpage. This part is part 30 of GB/T 15972. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 15972.30-2008 "Specification for Optical Fiber Test Methods Part 30.Measurement Methods and Tests of Mechanical Properties Procedural fiber screening test. Compared with GB/T 15972.30-2008, the main technical changes in this part are as follows. ---Added 3.1 Note 2 of calculating the stress of the optical fiber from the applied tension T (see 3.1); ---Added the requirements for the typical value of the maintenance time of the applied tensile load (see 3.2); ---Modified the requirements for passing the test (see 3.3, 3.3 of the.2008 edition); ---Added a note on the difference between online screening and non-online screening by equipment (see 4.1); ---Added the requirements for the screening test area (see 4.3); ---Added a brake wheel type equipment design method (see 4.7.2). This part uses the redrafting method to modify and adopt IEC 60793-1-30.2010 "Optical Fiber Part 1-30.Measurement Methods and Test Procedures" Optical fiber screening test. Compared with IEC 60793-1-30.2010, the structural changes of this part are as follows. ---Due to the addition of Chapter 3 and Figure 1, Chapter 3, Chapter 4, and Chapter 5 of the International Standard have been postponed to Chapter 4, Chapter 5, and Chapter 6 Chapter, Figure 1 and Figure 2 are extended to Figure 2 and Figure 3; Chapter 6 of the international standard is deleted; ---Incorporating the contents of Chapter 8 of the International Standard into Chapter 7. The technical differences between this part and IEC 60793-1-30.2010 and the reasons are as follows. ---Regarding normative reference documents, this section has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Added reference to GB/T 15972.10. ---In Chapter 3 of this part, referring to ITU-TG.650.1 (2010), the formula for stress and strain is added, and the international standard is deleted. The calculation formula in Chapter 6. This section has made the following editorial changes. ---In order to be consistent with my country's standard system, the standard name is changed to "Optical Fiber Test Method Specification Part 30.Measurement Method of Mechanical Properties Methods and test procedures for optical fiber screening test. Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents. This part was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part is under the jurisdiction of the National Communication Standardization Technical Committee (SAC/TC485). Drafting unit of this section. Fiberhome Technology Group Co., Ltd. The main drafters of this section. Liu Cheng, Hu Guyue, Wang Dongxiang, Hu Peng, Xu Jiangbo, He Maoyou. The previous releases of the standards replaced by this part are as follows. ---GB/T 15972.30-2008. Optical fiber test method specification part 30. Measurement methods and test procedures of mechanical properties Optical fiber screening test1 ScopeThis part of GB/T 15972 specifies the screening test method for continuous length optical fiber by applying the specified tension, and establishes the measurement system. 1.Test procedures and technical requirements. This section applies to A1, A2, A3 multi-mode fiber and B single-mode fiber.2 Normative referencesThe following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 15972.10 Optical fiber test method specification Part 10.General rules of measurement methods and test procedures (GB/T 15972.10- 2021, IEC 60793-1-1.2017, MOD)3 Method overview3.1 Benchmark test method. longitudinal tension method In this test, tension is applied to a complete continuous-length optical fiber. After the loading test, the initial length may be broken into several short sections. All segments are considered to have passed the screening test. The standard atmospheric environmental conditions used for storage and testing should meet the requirements of GB/T 15972.10. Stress σ or strain ε can be used in the measurement, and their relationship is shown in formula (1). σ=E0(1 CSε)ε (1) Where. E0---Young's modulus under zero stress, in gigapascals (GPa); CS---a non-linear parameter (typical value is between 3~6). From the applied tension T (in Newtons, N) to calculate the fiber stress, see formula (2). σ= (1-F)T πa2 × 103 (2) Where. a---The radius of the glass fiber, in micrometers (μm); F---The tension ratio assumed by the coating layer. Where F is given by formula (3). F= j=1 EjAj Egπa2 ∑ j=1 EjAj (3) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15972.30-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 15972.30-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15972.30-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15972.30-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15972.30-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15972.30-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
