GB/T 1593-2015 English PDF

US$379.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1593-2015: Agricultural wheeled tractor -- Rear-mounted three-point linkage -- Categories 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4
Status: Valid

GB/T 1593: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1593-2015	379	Add to Cart	3 days	Agricultural wheeled tractor -- Rear-mounted three-point linkage -- Categories 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4	Valid
GB/T 1593.1-1996	439	Add to Cart	4 days	Agricultural wheeled tractors--Rear-mounted three-point linkage--Part 1: Categories 1, 2, 3 and 4	Obsolete
GB 1593.1-1987	279	Add to Cart	3 days	Agricultural wheeled tractors--Three-point linkage--Part 1: Categories 1, 2 and 3	Obsolete

Similar standards

GB/T 3871.6   GB/T 3871.3   GB/T 14226   GB/T 7120   

Basic data

Standard ID: GB/T 1593-2015 (GB/T1593-2015)
Description (Translated English): Agricultural wheeled tractor -- Rear-mounted three-point linkage -- Categories 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: T62
Classification of International Standard: 65.060.10
Word Count Estimation: 18,136
Date of Issue: 2015-05-15
Date of Implementation: 2015-09-01
Older Standard (superseded by this standard): GB/T 1593.4-2004; GB/T 1593.2-2003; GB/T 1593.1-1996
Quoted Standard: GB/T 3871.3-2006; GB/T 10916-2003; ISO 2332-2009
Adopted Standard: ISO 730-2009, MOD
Regulation (derived from): National Standard Announcement 2015 No. 15
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the Agricultural wheeled tractors - Rear-mounted three main dimensions and parameters of the suspension. This Standard applies to the power output shaft power several categories as listed in Table Agricultural wheeled tractors - Rear-mounted three-point hitch of 1. 1N and narrow suspension ZN class standard applies to a narrow tread (tread ��1 150 mm) Agricultural wheeled tractors. 3N and 4N narrow suspension standard class to meet the requirements of the use of special tools or agronomic use in a smaller space requirements for three-point hitch. Agricultural wheeled tractors Front three-point suspension and the size of the device required by the GB/T 10916-2003 OK.

GB/T 1593-2015: Agricultural wheeled tractor -- Rear-mounted three-point linkage -- Categories 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Agricultural wheeled tractor. Rear-mounted three-point linkage. Categories 0, 1N, 1, 2N, 2, 3N, 3, 4N and 4 ICS 65.060.10 T62 National Standards of People's Republic of China Replacing GB/T 1593.1-1996, GB/T 1593.2-2003 and GB/T 1593.4-2004 Agricultural wheeled tractors - Rear three-point hitch 0,1N, 1,2N, 2,3N, 3,4N and Class 4 Categories0,1N, 1,2N, 2,3N, 3,4Nand4 (ISO 730.2009, Agriculturalwheeledtractor-Rear-mountedthree-point linkage-Categories1N, 1,2N, 2,3N, 3,4Nand4, MOD) Issued on. 2015-05-15 2015-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 1593.1-1996 "Part 1 Agricultural wheeled tractors - Rear three-point hitch. 1,2,3 and Class 4 ", GB/T 1593.2-2003" Part 2 Agricultural wheeled tractors - Rear three-point hitch. 1N class "and GB/T 1593.4- 2004 "Agricultural wheeled tractors Rear mounted three - point linkage - Part 4. 0 class." This standard and GB/T 1593.1-1996, GB/T 1593.2-2003 and GB/T 1593.4-2004 compared to, in addition to editorial changes outside The main technical differences are listed in Appendix C of the technical differences table. This standard uses redrafted law revision using ISO 730.2009 "Agricultural wheeled tractors - Rear-mounted three-point hitch 1N, 1, 2N, 2,3N, 3,4N, and 4 "(in English). This standard and ISO 730. compared to 2009 in the structure have more adjustment, are listed in Appendix D of this standard and ISO 730.2009 chapter Article ID change table. This standard and ISO 730.2009 main technical differences are as follows. --- International normative documents referenced replaced consistency correspondence between our files; --- Increased class 0 All dimensions and parameters of the suspension (see Table 1 to Table 4 and Table A.1); --- In Appendix A (normative) to Appendix A (normative). For ease of use, this standard also ISO 730.2009 made the following editorial changes. a) a simplified Table 2, Table 3 and Table 4 instead of the ISO 730.2009 Table 2, Table 3 and Table 4; b) the parameters in Appendix A A.2 and A.3 of value to the table A.1 in the form; c) an increase in Appendix B (informative) Appendix C (informative) and Annex D (informative). This standard and ISO 730.2009 compared to the existence of technical differences between the terms of these differences have been involved in the blank position by its outer margin Vertical single line (︱) were marked. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee tractor (SAC/TC140) centralized. This standard was drafted. China First Tractor Group Co., Ltd., National Tractor Quality Supervision and Inspection Center. The main drafters of this standard. Dong Hao, Chen Jingfang, Hu Xiaohua, still Rope, WEAR BEHAVIORS, Chen Song, Xiewei Xiang. This standard replaces the standards previously issued as follows. --- GB/T 1593-1979; --- GB/T 1593.1-1987, GB/T 1593.1-1996; --- GB/T 1593.2-1987, GB/T 1593.2-2003; --- GB/T 1593.4-1987, GB/T 1593.4-2004. Agricultural wheeled tractors - Rear three-point hitch 0,1N, 1,2N, 2,3N, 3,4N and Class 4

1 Scope

This standard specifies the Agricultural wheeled tractor rear-mounted main dimensions and parameters of the three-point hitch. This standard applies to the power output shaft power several categories as listed in Table Agricultural wheeled tractors Rear three-point suspension device 1. Table 1 rear three-point hitch Category Type the engine rated speed PTO power a/kW 0 ≤20 1N ≤35 1 ≤48 2N/2 30 ~ 92 3N/3 60 ~ 185 4N/4 110 ~ 350 a power output shaft of the engine power is determined according to GB/T 3871.3-2006 Test procedures for the calibration speed. 1N and 2N suspension narrow class standard applies to the narrow wheelbase (wheelbase ≤1150mm) Agricultural wheeled tractors. 3N and 4N suspension narrow class standards to meet the use of special tools or agricultural requirements in a smaller space requirements using the three-point hitch. Agricultural wheeled tractors - Front three-point suspension and the size of the device required by the GB/T 10916-2003 OK.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 3871.3-2006 Agricultural tractors - Test procedures - Part 3. PTO power tests (ISO 789-1.1990, MOD) GB/T 10916-2003 Agricultural wheeled tractors front device - Part 1. PTO and three-point hitch (ISO 8759-1.1998, IDT) ISO 2332.2009 Agricultural tractors and machinery three-point suspension gap range of equipment means equipment connected on (Agriculturaltractorsandmachinery-Connectionofimplementsviathree-pointlinkage-Clearance zonearoundimplement)

3 Terms and Definitions

The following terms and definitions apply to this document. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1593-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1593-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1593-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1593-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1593-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1593-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.