GB/T 15663.4-2008 English PDFUS$599.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15663.4-2008: Terms relating to coal mining -- Part 4: surface mining Status: Valid GB/T 15663.4: Historical versions
Basic dataStandard ID: GB/T 15663.4-2008 (GB/T15663.4-2008)Description (Translated English): Terms relating to coal mining -- Part 4: surface mining Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D04 Classification of International Standard: 01.040.73 Word Count Estimation: 26,248 Date of Issue: 2008-09-18 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 15663.4-1995 Regulation (derived from): National Standard Approval Announcement 2008 No.16 (Total No.129) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the elements of the open stope mining related, pioneering mining, basic technical and economic terms, production process systems. This section applies to all documents relating to open pit mining, standards, regulations, specification, Books, textbooks and manuals. GB/T 15663.4-2008: Terms relating to coal mining -- Part 4: surface mining---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Terms relating to coal mining Part 4. Surface mining ICS 01.040.73 D04 National Standards of People's Republic of China Replacing GB/T 15663.4-1995 Coal Science and Technology Terminology - Part 4. open-pit mining Posted 2008-09-18 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 15663 "to coal The term" divided into the following sections. --- Part 1. Coal Geology & Exploration; --- Part 2. underground construction; --- Part 3. underground mining; --- Part 4. open pit mining; --- Part 5. hoisting and transport; --- Part 6. Mine Surveying; --- Part 7. coal mining subsidence and special; --- Part 8. mine safety; --- Part 10. mining machinery; --- Part 11. Electric Mine. This section GB/T Part of 415,663. This Part replaces GB/T 15663.4-1995 "term to coal open-pit mining." Compared with GB/T 15663.4-1995, this part was amended as follows. --- The standard delete GB/T 15663.4-1995 "term to coal open-pit mining" in the "code", "Allow the use of same Meaning of the word, "" prohibit the use of synonyms. " --- This standard chapter and section numbers have been adjusted terms, which will be "6 technical and economic terms," \u200b\u200bthe content into a "2-yl The term "in which the" working line forward speed 6.9 "," 6.10 mining engineering and deepening speed "to" open up mining 4 The term "in the" line speed of advancement of the work of 4.32, 4.35 mining and construction Deepening rate "and the exclusion Chapter 6 and" Health 5 Production system, "the title was changed to" 5 production process system. " --- The definition of some of the terms were modified. This part of China Coal Industry Association presented. This part of the National Standardization Technical Committee centralized coal. This section is drafted. Coal International Engineering Group in Shenyang Design Institute. The main drafters of this section. Caused by Hung Yu, 1 Open Pit, Wushuang Chen, Lee Department of cause, Wangchang Lu, Shien Quebec. This part replaces the previous version of the published case. --- GB/T 15663.4-1995. Coal Science and Technology Terminology - Part 4. open-pit mining1 ScopeThis section specifies the elements related to open pit mining stope, the pioneering basic terminology extraction, production process systems, technology economy. This section applies to open-pit mining and related documents, standards, rules, standards, books, textbooks and manuals and the like.2 Basic terms2.1 Directly from the surface to expose the mineral and recovery operations. 2.2 In opencast mining enterprises. 2.3 Open pit mining sites. 2.4 Closed loop over the surface open pit mining sites. 2.5 In the closing laps of the following surface open pit mining sites. 2.6 Opencast mining is classified as a deposit or part of it. 2.7 In the open stope mined minerals operations. 2.8 Out in the open stope mining job peeling thereof. 2.9 The open stope topsoil, rock and minerals not recovered. 2.10 Stripping ratio and the amount of the amount of useful minerals. 2.11 The ratio of the total amount of the total amount of useful minerals and recycling peeling within the realm of open-pit mining. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15663.4-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 15663.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15663.4-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15663.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15663.4-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15663.4-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
