GB/T 15558.3-2023 English PDFUS$909.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15558.3-2023: Buried polyethylene(PE) piping systems for the supply of gaseous fuels - Part 3: Fittings Status: Valid GB/T 15558.3: Historical versions
Basic dataStandard ID: GB/T 15558.3-2023 (GB/T15558.3-2023)Description (Translated English): Buried polyethylene(PE) piping systems for the supply of gaseous fuels - Part 3: Fittings Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G33 Classification of International Standard: 83.140.30 Word Count Estimation: 45,436 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Older Standard (superseded by this standard): GB/T 15558.2-2005 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 15558.3-2023: Buried polyethylene(PE) piping systems for the supply of gaseous fuels - Part 3: Fittings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 83:140:30 CCSG33 National Standards of People's Republic of China Replace GB/T 15558:2-2005 Buried polyethylene (PE) piping system for gas Part 3: Pipe fittings gaseousfuels-Polyethylene(PE)-Part 3:Fittings,MOD] Published on 2023-11-27 2024-06-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms, definitions, symbols and abbreviations 2 4 Materials 3 5 Product Categories 4 6 Requirements 4 7 Test methods 14 8 Inspection Rules 16 9 flag 19 10 Technical Documents 20 11 Packaging, transportation and storage20 Appendix A (informative) This document is compared with ISO 4437-3:2014 structure number comparison list 21 Appendix B (informative) Technical differences between this document and ISO 4437-3:2014 and their reasons 23 Appendix C (informative) Typical terminal diagram of electrofusion pipe fittings 27 Appendix D (Normative) Welding Strength Test Method for Electrofusion Saddle Pipe Fittings 29 Appendix E (normative) Determination of gas flow-pressure drop relationship 34 Reference 38ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 3 of GB/T 15558 "Underground polyethylene (PE) piping system for gas use": GB/T 15558 has been released The following parts: ---Part 1: General provisions; ---Part 2: Pipes; ---Part 3: Pipe fittings; ---Part 4: Valves; ---Part 5: System suitability: This document replaces GB/T 15558:2-2005 "Buried polyethylene (PE) piping system for gas use Part 2: Pipe fittings" and is consistent with Compared with GB/T 15558:2-2005, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Added requirements that the maximum working pressure should not be greater than 1:0MPa and the working temperature should be between -20°C and 40°C (see Chapter 1); b) The nominal outer diameter range has been changed (see Chapter 1, Chapter 1 of GB/T 15558:2-2005); c) Changes in terms and definitions (see Chapter 3, Chapter 3 of GB/T 15558:2-2005); d) Changed the symbols and added abbreviations (see 3:2, Chapter 4 of GB/T 15558:2-2005); e) Added relevant requirements for PE100-RC materials and pipe fittings (see Chapter 4); f) Delete the relevant requirements for additives (see 5:2 of GB/T 15558:2-2005); g) The material weldability requirements are deleted (see 5:6 of GB/T 15558:2-2005); h) The requirements for metal parts have been changed (see 4:2:2, 5:7:2 of GB/T 15558:2-2005); i) Changed the requirements for elastic seals (see 4:2:3, 5:7:3 of GB/T 15558:2-2005); j) The requirements for recycled materials/recycled materials have been changed (see 4:3, 5:3 of GB/T 15558:2-2005); k) Changed the color requirements for pipe fittings (see 6:2, 6:1 of GB/T 15558:2-2005); l) Added the pressure-bearing capacity, saddle-shaped bypass opening, out-of-roundness that needs to be considered when designing the saddle, and brackets to prevent the socket from being out-of-round: Requirements (see 6:3:1); m) It is added that the socket end of the pipe fitting can be equipped with a temporary bracket to prevent the port from being out of round (see 6:5:1); n) Added relevant dimensional requirements for the spigot end and socket end of pipe fittings dn710mm and dn800mm (see 6:5:2:2 and 6:5:3:2); o) The requirement for average outer diameter grade A of the pipe fitting spigot end size is deleted (see 7:2:1 of GB/T 15558:2-2005); p) Added the requirements for the average inner diameter of the electrofusion socket end; deleted the requirements for the insertion depth of the electrofusion socket end under the current adjustment state (see 6:5:3:2, 7:2:2 of GB/T 15558:2-2005); q) Added other dimensional requirements for electrofusion pipe fittings (see 6:5:3:5); r) The relevant distance requirements for electrofusion saddle-shaped pipe fittings have been changed (see 6:5:4, 7:3:3 of GB/T 15558:2-2005); s) Added dimensional requirements for flange connection pipe fittings (see 6:5:5); t) The hydrostatic strength (20℃, 100h) test parameters have been changed (see 6:6, 8:2 of GB/T 15558:2-2005); u) Added requirements for welding strength, strain hardening test, ash content, carbon black content, carbon black dispersion/pigment dispersion of electrofused saddle-shaped pipe fittings (see 6:6, 6:7); v) Changed the oxidation induction time parameter (see 6:7, Chapter 9 of GB/T 15558:2-2005); w) Added system suitability requirements (see 6:8); x) The relevant test method requirements for performance requirements have been changed (see Chapter 7, see Chapter 10 of GB/T 15558:2-2005); y) Changed the grouping of pipe fittings (see 8:2, see 11:3:3 of GB/T 15558:2-2005); z) Added the list of inspection items (see 8:4:1); aa) Added control point test (see 8:5); ab) Changed type inspection requirements (see 8:6, see 11:3:5 of GB/T 15558:2-2005); a) Added mixing ingredients, pressure level, and flow label requirements (see 9:2); ad) Added traceability code and barcode identification (see 9:2); ae) Changes in packaging, transportation and storage requirements (see Chapter 11, Chapter 14 of GB/T 15558:2-2005); af) Added Appendix D "Test Method for Welding Strength of Electrofusion Saddle Pipe Fittings": This document has been modified to adopt ISO 4437-3:2014 "Plastic piping system polyethylene (PE) for gas use Part 3: Pipe fittings": Compared with ISO 4437-3:2014, this document has many structural adjustments: Comparison list of structure number changes between two files See Appendix A for the table: Compared with ISO 4437-3:2014, this document has many technical differences: Vertical text is used in the outer margin of the clauses involved: The single line (︱) is marked: A list of these technical differences and their causes is shown in Appendix B: The following editorial changes have been made to this document: ---In order to coordinate with the existing standards, the name of the standard is changed to "Buried polyethylene (PE) pipeline system for gas use Part 3: Pipe fittings"; ---In order to facilitate the understanding and use of the standard, notes that are not in line with my country's national conditions have been deleted, and some notes have been changed or added; ---Deleted Appendix E of ISO 4437-3:2014: Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Light Industry Federation: This document is under the jurisdiction of the National Technical Committee for Standardization of Plastic Products (SAC/TC48): This document was drafted by: Yada Plastic Products Co:, Ltd:, Hong Kong Huixin Engineering Plastics (Zhongshan) Co:, Ltd:, Ningbo Yuhua Industrial Co:, Ltd: Co:, Ltd:, Zhejiang Xinda Plastic Pipe Fittings Co:, Ltd:, Ningbo Hengyuan Precision Pipe Valve Technology Co:, Ltd:, Jilin Songjiang Plastic Pipe Equipment Co:, Ltd: Limited liability company, Baolu Qixing Pipe Industry Co:, Ltd:, Nansu Building Materials Plastic Products (Shenzhen) Co:, Ltd:, Beijing Technology and Business University, Beijing Gas Collection Tuan Co:, Ltd:, Zhejiang Zhongcai Pipeline Technology Co:, Ltd:, Wuhan Jinniu Economic Development Co:, Ltd:, Shenzhen Gas Group Co:, Ltd: Co:, Ltd:, Xi'an Sulong Welding Equipment Co:, Ltd:, Zhengzhou China Resources Gas Co:, Ltd:, and China Gas Industrial (Shenzhen) Co:, Ltd: The main drafters of this document: Wang Zhiwei, Liu Gang, Chen Jianqiang, Wang Lijun, Tong Jinjin, Wang Haorong, Xu Hongyue, Wang Baiti, Xiang Aimin, Bai Liping, Wang Wenbi, Zheng Wei, Cai Yu, Zhao Feng, Jia Fengxiao, Yang Shabai, Li Yu: The previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 15558:2-1995 in:1995, first revised in:2005; ---This is the second revision, and the standard number is adjusted to GB/T 15558:3:IntroductionGB/T 15558 "Buried Polyethylene (PE) Pipeline System for Gas" is to standardize the buried polyethylene (PE) pipeline system for gas Materials, pipes, fittings, valves and system suitability requirements: During this revision process, GB/T 15558:1-2023 and 2023 replaced GB/T 15558:1-2015, GB/T 15558:2-2005 and GB/T 15558:3-2008 respectively: GB/T 15558 "Buried Polyethylene (PE) Pipeline System for Gas" was drafted based on the actual production and application of polyethylene pipeline products in my country: It consists of five parts: general principles, pipes, fittings, valves and system applicability: ---Part 1: General principles: The purpose is to establish the terms, definitions, symbols and regulations applicable to buried polyethylene (PE) piping systems for gas: Abbreviations, materials, test methods and inspection report requirements: ---Part 2: Pipes: The purpose is to establish terms, definitions, symbols and abbreviations applicable to buried polyethylene (PE) pipes for gas language, materials, product classification, requirements, test methods, inspection rules, marking and packaging, transportation, and storage: ---Part 3: Pipe fittings: The purpose is to establish terms, definitions, symbols and abbreviations applicable to buried polyethylene (PE) pipe fittings for gas language, materials, product classification, requirements, test methods, inspection rules, markings, technical documents and packaging, transportation and storage: ---Part 4: Valves: The purpose is to establish terms, definitions, symbols and abbreviations applicable to buried polyethylene (PE) valves for gas use: language, materials, product classification, requirements, test methods, inspection rules, markings, technical documents and packaging, transportation and storage: ---Part 5: System suitability: The purpose is to establish the system suitability for buried polyethylene (PE) piping systems for gas Terms, definitions, requirements, test methods and inspection rules: Buried polyethylene (PE) piping system for gas Part 3: Pipe fittings1 ScopeThis document specifies the materials, product classification, specifications, dimensions and deviations of buried polyethylene (PE) pipe fittings for gas (hereinafter referred to as "pipe fittings"): The physical and mechanical properties, inspection rules, markings, technical documents and packaging, transportation and storage requirements describe the corresponding test methods: This document, together with other parts of GB/T 15558, is applicable to operating temperatures between -20℃~40℃ and maximum operating pressure (MOP) Buried polyethylene pipeline system for gas not exceeding 1:0MPa: This document is applicable to underground polyethylene for gas use with a nominal outer diameter of 16mm~800mm made of PE100 and PE80 grade compounds: Vinyl pipe fittings: This document does not apply to hot-melt socket connection pipe fittings: Note 1: When transporting artificial coal gas and liquefied petroleum gas, it is necessary to consider the impact of other components (such as aromatic hydrocarbons and condensate) present in the gas on the performance of the pipe fittings at a certain concentration: adverse effects on performance: Note 2: The maximum working pressure of the pipeline system is related to the working temperature and the material’s rapid crack propagation resistance (RCP) critical pressure, see GB/T 15558:1-2023 Appendix C: The reference operating temperature is 20℃: Note 3: Relevant parties have the responsibility to appropriately select the products specified in GB/T 15558 (all parts) based on specific application needs and in combination with relevant laws, standards and specification requirements: product:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 2828:1 Enumeration sampling inspection procedures Part 1: Batch-by-batch inspection sampling plan retrieved by acceptance quality limit (AQL) (GB/T 2828:1-2012,ISO 2859-1:1999,IDT) GB/T 2918 Standard environment for conditioning and testing of plastic specimens (GB/T 2918-2018, ISO 291:2008, MOD) GB/T 3682:1 Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of plastic thermoplastics Part 1: Standard method (GB/T 3682:1-2018, ISO 1133-1:2011, MOD) GB/T 6111 Determination of internal pressure resistance of thermoplastic piping systems for fluid transportation (GB/T 6111-2018, ISO 1167-1:2006, ISO 1167-2:2006, ISO 1167-3:2007, ISO 1167-4:2007, NEQ) GB/T 8806 Determination of dimensions of plastic components of plastic piping systems (GB/T 8806-2008, ISO 3126:2005, IDT) GB/T 9345:1 Determination of ash content of plastics Part 1: General method (GB/T 9345:1-2008, ISO 3451-1: 1997,IDT) GB/T 13021 Determination of carbon black content in polyolefin pipes and fittings Calcination and pyrolysis method (GB/T 13021-2023, ISO 6964:2019,IDT) GB/T 15558:1-2023 Buried polyethylene (PE) piping system for gas use Part 1: General principles (ISO 4437-1:2014, MOD) GB/T 15558:2-2023 Buried polyethylene (PE) piping systems for gas use Part 2: Pipes (ISO 4437-2:2014, MOD) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15558.3-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 15558.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15558.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15558.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15558.3-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15558.3-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
