GB/T 15305.3-2009 English PDFUS$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15305.3-2009: Coated abrasives -- Abrasive belts -- Selection of width/length combinations Status: Valid GB/T 15305.3: Historical versions
Basic dataStandard ID: GB/T 15305.3-2009 (GB/T15305.3-2009)Description (Translated English): Coated abrasives -- Abrasive belts -- Selection of width/length combinations Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J43 Classification of International Standard: 25.100.70 Word Count Estimation: 22,247 Date of Issue: 2009-04-23 Date of Implementation: 2009-12-01 Older Standard (superseded by this standard): GB/T 15305.3-1994 Quoted Standard: ISO 554-1976 Adopted Standard: ISO 2976-2005, MOD Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the basic dimensions and limit deviations of belt. This section applies to hand-held and stationary grinding machine grinding machine belt. GB/T 15305.3-2009: Coated abrasives -- Abrasive belts -- Selection of width/length combinations---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Coated abrasives. Abrasive belts. Selection of width/length combinations ICS 25.100.70 J43 National Standards of People's Republic of China Replacing GB/T 15305.3-1994 Coated abrasives belt Choose width and length combinations (ISO 2976.2005, MOD) Posted 2009-04-23 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe partial modification of the use of ISO 2976.2005 "Coated Abrasives belt width and length combinations to select" (in English). This section according to ISO 2976.2005 redrafted. Because of the special needs and requirements of the development of industry, this section at the time of adoption of international standards has been modified. These technical differences with Vertical single-line identification in the space covered by the terms of their margins. This portion of the ISO 2976.2005 The main differences are as follows. --- Table 1 increased 1350mm × 2800mm The size and limit deviations; --- Table 1 is deleted width of 13mm and 15mm T - Dimensions and limit deviations; --- Table 1 increased the width of the T series and a size limit deviation of 14mm; --- Table 2 adds the dimensions of 210mm × 230mm and limit deviations; --- Table 1 Delete the width T > 1400mm size of the series and its limit deviation; --- Appendix A, Table A. 1 and Table A. 2 with Table 1 and Table 2, made the corresponding changes. For ease of use, this standard also made the following editorial changes. --- Delete foreword international standards; --- The "this International Standard" be replaced by "of this standard." This Part replaces GB/T 15305.3-1994 "coated abrasive belt dimensions and tolerances." Section compared with the GB/T 15305.3-1994 The main changes are as follows. --- Deletion of the GB/T 15305.3-1994 Chapter 2 basic dimensions and limit deviations; --- Size combinations in addition to using ISO 2976.2005, the appropriate increase in the domestic common belt sizes; --- Adds new design is not suitable for use belt sizes; --- Increasing the length difference on both sides of the tape provisions; --- Increased belt test conditions; --- Increased belt marks and logos. Appendix A of this section is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee Abrasives (SAC/TC139) centralized. This section is drafted. Hubei Yuli Belt Group Co., Ltd., Zhengzhou Institute of abrasive grinding. This section drafters. yellow sunflower, Xuxiong Fu, Zhong Yan Zheng, Wang Weitao. This part of the standard replaces the previous editions are. --- GB/T 15305.3-1994. Coated abrasives belt Choose width and length combinations1 ScopeGB/T 15305 provisions of this part of the basic dimensions and limit deviations of the belt. This section applies to hand-held and stationary grinding machine grinding machine belt.2 Normative referencesThe following documents contain provisions which, through reference GB/T 15305 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. ISO 554. 1976 Limited and (or) test standard atmospheric conditions for environmental technology3 Requirements3.1 Basic dimensions and limit deviations Belt basic dimensions and limit deviations shown in Figure 1, Table 1 and Table 2 (or see Appendix A). 1 --- belt; 2 --- roller; Rao --- the distance between the two rollers; T --- belt width. Figure 1 belt ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15305.3-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 15305.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15305.3-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15305.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15305.3-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15305.3-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
