GB/T 15249.3-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15249.3-2009: Methods for chemical analysis of crude gold -- Part 3: Determination of copper content -- Iodometric method
Status: Valid

GB/T 15249.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 15249.3-2009	139	Add to Cart	3 days	Methods for chemical analysis of crude gold -- Part 3: Determination of copper content -- Iodometric method	Valid
GB/T 15249.3-1994	199	Add to Cart	2 days	Crude Gold-Determination of copper content-Iodometric method	Obsolete

Similar standards

GB/T 38744   GB/T 38783   GB/T 15076.3   GB/T 15249.4   GB/T 15249.5   GB/T 15249.2   

Basic data

Standard ID: GB/T 15249.3-2009 (GB/T15249.3-2009)
Description (Translated English): Methods for chemical analysis of crude gold -- Part 3: Determination of copper content -- Iodometric method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H15
Classification of International Standard: 77.120.70
Word Count Estimation: 6,695
Date of Issue: 2009-05-06
Date of Implementation: 2009-10-01
Older Standard (superseded by this standard): GB/T 15249.3-1994
Regulation (derived from): National Standard Approval Announcement 2009 No.6 (Total No.146)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the determination of crude gold in copper content. This section applies to crude gold (mine gold, metallurgical recovery of coarse gold products and gold) Determination of copper content. Determination of copper content range: 0. 50% to 30. 00 %.

GB/T 15249.3-2009: Methods for chemical analysis of crude gold -- Part 3: Determination of copper content -- Iodometric method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of crude gold Part 3. Determination of copper content Iodometric method ICS 77.120.70 H15 National Standards of People's Republic of China Replacing GB/T 15249.3-1994 Crude Gold Analysis Part 3. Determination of copper content Iodometry Posted 2009-05-06 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 15249 "Crude Gold analysis method" is divided into the following five sections. --- Part 1. Determination of the amount of gold fire assay gravimetric method; --- Part 2. Determination of the amount of silver fire assay gravimetric and EDTA titration; --- Part 3. Determination of copper content iodometry; --- Part 4. Determination of lead content EDTA titration; --- Part 5. Determination of mercury content - Cold atomic absorption spectrometry. This section GB/T 15249 Part 3. This Part replaces GB/T 15249.3-1994 "Crude Gold - Determination of copper content Methods for chemical analysis Iodometry." This portion of the GB/T 15249.3-1994 compared to the main changes are as follows. --- Text format has been modified; --- Remove the "allowable difference" clause; --- Added "precision" clause (repeatability and reproducibility); --- Increased quality assurance and control provisions. This section proposed by the People's Bank of China. This part of the National Standardization Technical Committee on Finance (SAC/TC180) centralized. This section is responsible for drafting unit. Beijing General Research Institute of Mining and Metallurgy. Participated in the drafting of this section. Chengdu Banknote Printing Company, Changchun Gold Research Institute, Shenyang Mint, Shanghai and Nanjing Mint Mint. The main drafters of this section. Tangshu Fang, Yu Li, Zhou Hua, Deng Haihong. This part of the standard replaces the previous editions are. --- GB/T 15249.3-1994. Crude Gold Analysis Part 3. Determination of copper content Iodometry

1 Scope

This section GB/T 15249 specifies the method for determination of crude gold copper content. This section applies to the determination of crude gold (gold mining, smelting and recycling crude metal products such as gold) copper content. Determination of copper content range. 0.50% - 30.00%.

2 principle of the method

Dilute nitric acid, hydrochloric acid decomposition test material, precipitation of silver chloride, silver sulfite reduction of Au (Ⅲ) to elemental gold, separating gold, silver after adding Sulfuric trioxide smoke take in order to get rid of nitrogen oxides, adjusting acidity, hydrogen fluoride, ammonium iron mask with dilute aqueous ammonia, in the slightly acidic pH3.0 ~ 4.0 Solution of copper (Ⅱ) with potassium iodide free from iodine, using starch as indicator, titrated with sodium thiosulfate standard titration solution.

3 Reagents

Unless otherwise indicated in the analysis using only recognized as analytical grade reagents and distilled or deionized water or equivalent purity. 3.1 potassium iodide. 3.2 ammonium hydrogen fluoride. 3.3 potassium thiocyanate. 3.4 hydrochloride (ρ1.19g/mL). Nitrate 3.5 (ρ1.42g/mL). 3.6 nitric acid (1 + 1). 3.7 sulfate (1 + 1), the preparation of sulfuric acid (ρ1.84g/mL). 3.8 sulfite (ρ1.03g/mL). Ammonia 3.9 (1 + 1). 3.10 starch solution (5g/L). 3.11 Copper Standard solution. Weigh 1.0000g copper (mass fraction of not less than 99.99%) were placed in 300mL beaker was slowly added 40mL Nitric acid (3.6), covered with a watch glass and heated to dissolve completely, removed, washed with water and dish cup wall surface, cooled to room temperature, transferred to 1000mL container Volumetric flask, dilute with water to volume, and mix. 1mL solution containing 1mg of copper. 3.12 sodium thiosulfate standard titration solution [Ba (Na2S2O3) ≈0.016mol/L]. Weigh 4g sodium thiosulfate (Na2S2O3 · After 5H2O under) in 300mL beaker, add cold boiled distilled water, was added 0.1g of sodium carbonate, dissolved moved 1000mL capacity Bottle, diluted with water to volume, and mix. 7d in the dark place after calibration. Calibration. Pipette three 25.00mL copper standard solution (3.11), were placed in 250mL beaker, add 5mL of sulfuric acid (3.7), heating Evaporation to take sulfur trioxide concentration of white smoke, remove the cooling. Beibi water purge, continue to take the best heating evaporation trioxide smoke, add 6 drops of cooling Sulfuric acid (3.7), the purge cup wall, add water to approximately 30mL, was heated to completely dissolve the salt, cooled to room temperature. 4.3.8 The following press operations. Calculation. according to equation (1) calculate the standard volumetric sodium thiosulfate solution for copper titration factor. F = m1 Vp (1) Where. F --- sodium thiosulfate standard titration solution of copper titration factor, in milligrams per milliliter (mg/mL); M1 --- Pipette copper standard solution of copper mass, in milligrams (mg); ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15249.3-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15249.3-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15249.3-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15249.3-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15249.3-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15249.3-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.