GB/T 15231-2023 English PDFUS$409.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 15231-2023: Test methods for the properties of glassfibre reinforced cement Status: Valid GB/T 15231: Historical versions
Basic dataStandard ID: GB/T 15231-2023 (GB/T15231-2023)Description (Translated English): Test methods for the properties of glassfibre reinforced cement Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q14 Classification of International Standard: 91.100.40 Word Count Estimation: 20,266 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Older Standard (superseded by this standard): GB/T 15231-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 15231-2023: Test methods for the properties of glassfibre reinforced cement---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 91:100:40 CCSQ14 National Standards of People's Republic of China Replace GB/T 15231-2008 Test methods for properties of glass fiber reinforced cement Published on 2023-11-27 2024-06-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Specimen preparation 2 5 Standard test conditions 3 6 Bulk density, moisture content and water absorption 3 7 Compressive strength 4 8 Bending properties (bending proportional ultimate strength, bending ultimate strength, bending elastic modulus) 4 9 Tensile strength 6 10 Impact strength 7 11 Anchor pullout force 7 12 Embedded bolt sleeve pulling force 9 13 Frost resistance11 14 Shrinkage 11 15 Accelerated aging12 16 Glass fiber content 13 Appendix A (normative) Volume measurement method for specimens with irregular appearance 14ForewordThis document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document replaces GB/T 15231-2008 "Test Methods for Performance of Glass Fiber Reinforced Cement" and is consistent with GB/T 15231-2008 In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The anchor pullout force, embedded bolt sleeve pullout force, shrinkage rate, accelerated aging test piece size and quantity were added to the test piece preparation (see Section 1): Table 1 and Table 2 of Chapter 4); b) Added standard test conditions (see Chapter 5); c) Added the anchor pullout force test method (see Chapter 11); d) Added the test method for embedded bolt sleeve pullout force (see Chapter 12); e) Added normative reference document JG/T 243 (see 13:1:5); f) The automatic freezing and thawing test method has been added to the freezing resistance test method (see 13:1:5 and 13:2:4); g) Added shrinkage test method (see Chapter 14); h) Added accelerated aging test method (see Chapter 15): Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed by China Building Materials Federation: This document is under the jurisdiction of the National Cement Products Standardization Technical Committee (SAC/TC197): This document was drafted by: China National Institute of Building Materials Research Co:, Ltd:, Guochang Testing Holding Group Beijing Co:, Ltd:, Hunan Tianjin Ze Building Materials Co:, Ltd:, Shanghai Zhuoou Construction (Group) Co:, Ltd:, China Communications Road and Bridge Construction Co:, Ltd:, Zhejiang Yicheng Testing Co:, Ltd:, Henan Anluo Expressway Co:, Ltd:, Xi'an University of Architecture and Technology, Dounan (Henan) Engineering Inspection Technology Co:, Ltd:, Beijing Lihao Jiayuan Building Materials Co:, Ltd: Co:, Ltd:, Guangzhou Jieda Building Decoration Engineering Co:, Ltd:, Shaanxi Mei Innovation Materials Technology Co:, Ltd:, Anhui Huiliao New Decoration Materials Co:, Ltd: Co:, Ltd:, Guangzhou University, China Construction Science and Industry Group Co:, Ltd:, China MCC17 Group Co:, Ltd:, Guangdong S&P Architectural Decoration Design Engineering Co:, Ltd: The company, Chengdu Jinsheng Industrial Co:, Ltd:, Chongqing Zhongguan New Building Materials Co:, Ltd:, Zhejiang Lingfeng New Materials Co:, Ltd:, Yiheng Holdings Co:, Ltd: Co:, Ltd:, Suzhou Jingzheng New Materials Co:, Ltd:, Jiangxi Yinshan White Cement Co:, Ltd:, Nanjing Aojie Wall Materials Co:, Ltd:, Hangzhou Ang Yang Shili Technology Co:, Ltd:, Huizhou Hongye Environmental Protection Technology Co:, Ltd:, Shanghai Huiliao Technology Development Co:, Ltd:, Nanjing Concrete Lijian Architectural Consulting Co:, Ltd:, Taishan Fiberglass Zoucheng Co:, Ltd:, China Construction Strait Construction Development Co:, Ltd:, and Ningbo Mingsen Architectural Design Institute have Co:, Ltd:, China Construction Second Engineering Bureau Co:, Ltd:, Hunan Provincial Construction Engineering Quality Inspection Center Co:, Ltd:, China Railway 16th Bureau Group Real Estate Investment Co:, Ltd:, China Railway Construction Group Co:, Ltd:, China Construction Shenzhen Decoration Co:, Ltd:, JSTI Group Co:, Ltd:, China Construction Zhuxinnan Design and Research Institute Co:, Ltd:, China Construction Sixth Engineering Bureau Co:, Ltd:, and Hubei Provincial Construction Engineering Quality Supervision, Inspection and Testing Center have Co:, Ltd:, Sichuan Henggu Construction Engineering Inspection Co:, Ltd:, Suzhou First Construction Group Co:, Ltd:, MCC Construction Research Institute Co:, Ltd:, China Jiaoluqiao Northern Engineering Co:, Ltd:, Beijing Construction Engineering First Construction Engineering Construction Co:, Ltd: Concrete Branch, China Railway 11th Bureau Group Fourth Engineering Co:, Ltd: Co:, Ltd:, Beijing Urban Construction Engineering Co:, Ltd:, China Construction Eighth Engineering Bureau Co:, Ltd:, Shandong Expressway Co:, Ltd:, China State Construction Fifth Engineering Bureau Co:, Ltd:, China Railway 22nd Bureau Group Fourth Engineering Co:, Ltd:, China Railway 18th Bureau Group Third Engineering Co:, Ltd:, Shenzhen Municipal Special Economic Zone Construction Engineering Group Shengteng Technology Co:, Ltd:, China Railway Construction Bridge Engineering Bureau Group Co:, Ltd:, Suzhou Construction Engineering Quality Inspection Center Co:, Ltd:, Hunan Tonghe Engineering Co:, Ltd:, Shanghai Highway and Bridge (Group) Co:, Ltd:, Pearl River Water Conservancy Commission, Pearl River Water Conservancy Section Research Institute, Yunnan Construction Investment Green High Performance Concrete Co:, Ltd:, Henan Yushen Expressway Co:, Ltd:, Zhejiang Province Third Construction Group Group Co:, Ltd:, China Construction First Bureau Group Fifth Construction Co:, Ltd:, China Communications No: 4 Bureau (Beijing) Highway Testing Technology Co:, Ltd:, Hubei Zheng Pingshui Conservancy and Hydropower Engineering Quality Inspection Co:, Ltd:, Sichuan Luhang Construction Engineering Co:, Ltd:, and CCCC Guangzhou Water Transport Engineering Design and Research Institute have Co:, Ltd:, CNPC (Xinjiang) Petroleum Engineering Co:, Ltd:, China Railway 16th Bureau Group Co:, Ltd:, China Railway Construction Group North China Engineering Co:, Ltd:, Beijing Beijing Municipal Construction Group Co:, Ltd:, Shandong Yongfu Construction Group Co:, Ltd:, China Railway 10th Bureau Group Co:, Ltd:, Yunnan Yunshui Engineering Technology TECHNOLOGY TESTS LIMITED: The main drafters of this document: Li Qinghai, Cui Qi, Zhao Jiaojiao, Huang Zhengguo, Liu Hui, Lu Guannan, Jin Hao, Lu Weiqian, Tian Limin, Zhang Chaosong, Guo Qiusheng, Gao Qingwen, Wei Tingfeng, Fu Huijie, Qian Yuandi, Fang Yinsheng, Cheng Congmi, He Juan, He Hong, Yu Jialiang, Ma Chao, Zhu Jihong, Liu Nian, Chen Chunfeng, Xu Tingxian, Yang Weixi, Zhu Jie, Hong Yuan, Lin Angyang, Ye Dejian, Zhao Haibo, Che Yanfei, Li Wei, Guo Xiao, Zhang Hao, Shi Feiyun, Liu Jianzhao, Lei Yao, Li Zexu, Qian Zengzhi, Cao Yajun, Wei Wuju, Dong Biao, Zhang Lie, Tan Lei, Zhang Jiade, Zhao Bin, Hu Leting, Wang Bin, Yin Shengguang, Sun Xiaoming, Zhang Ming, Wang Lei, Zhang Shengli, Hou Rongyan, Ma Minglei, Bai Jie, Xiong Hao, Zhu Zhenxiang, Li Xinxing, Bai Zibin, Weng Zhenhua, Han Liangjun, Cao Yunzhu, Zhu Yongshun, Ding Junjian, Ni Wenquan, Fang Peng, Wu Guangjun, Li Shihua, Li Yuyao, Sun Hongliang, Fang Hong, Tang Deyun, Bu Fanmin, Zhang Weijun, He Runzhi, He Lijuan, Zhang Jianning, Huang Shunshen, Zhang Chengjie, Wang Jing, Yan Yongping, Zhang Guoping, Jiang Yu, Qiao Sen, Hu Chaolong, Zhang Yufei, Zhou Ke, Xian Zhenghong, Zhuang Quezhen, Lu Xinyan, Du Jiang, Zhang Lijun, Zhou Shengnan, Gao Jianwei, Li Qingyuan, Wu Yujiao, Zhang Xin: This document was first published in:1994, revised for the first time in:2008, and this is the second revision: Test methods for properties of glass fiber reinforced cement1 ScopeThis document describes the bulk density, moisture content, water absorption, compressive strength, and bending properties (bending ratio limit) of glass fiber reinforced cement: strength, bending ultimate strength and bending elastic modulus), tensile strength, impact strength, anchor pullout force, embedded bolt sleeve pullout force, frost resistance Test methods for resistance, shrinkage, accelerated aging and glass fiber content: This document applies to performance testing of glass fiber reinforced cement:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: JG/T 243 Concrete frost resistance test equipment3 Terms and definitionsThe following terms and definitions apply to this document: 3:1 It is made of cement as the main cementing material, sand as fine aggregate, alkali-resistant glass fiber as the main reinforcing material, and supplemented by additives and other components: Fiber-reinforced cement-based material: 3:2 Test board testboard Use the test flat plate made with the same mix ratio, the same molding process, and curing under the same conditions as the product: 3:3 Test piece sample A sample cut from a product or test board and used to test a certain performance: 3:4 glass fiber content glassfibrecontent The mass fraction of glass fiber in glass fiber reinforced cement: 3:5 anchor anchor Used to connect glass fiber reinforced cement panels and attached steel frames, with a certain degree of rotational freedom of 90° in the direction perpendicular to the panels: Curved steel bars: 3:6 bonding pad bonding pad An additional pile of fiberglass-reinforced cement material placed on top of a structural layer of fiberglass-reinforced cement to secure anchors: Note: Generally used on glass fiber reinforced cement components with steel frames attached to the back: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15231-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 15231-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 15231-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15231-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 15231-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15231-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
