GB/T 14800-2010 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14800-2010: Geosynthetics -- Static puncture test (CBR test)
Status: Valid

GB/T 14800: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14800-2010	154	Add to Cart	3 days	Geosynthetics -- Static puncture test (CBR test)	Valid
GB/T 14800-1993	239	Add to Cart	2 days	Test method for determining the puncture resistance of geotextiles	Obsolete

Similar standards

GB/T 17638   GB/T 33276   GB 18383   GB/T 17642   GB/T 43811   GB/T 14798   

Basic data

Standard ID: GB/T 14800-2010 (GB/T14800-2010)
Description (Translated English): Geosynthetics -- Static puncture test (CBR test)
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: W59
Classification of International Standard: 59.080.70
Word Count Estimation: 8,824
Date of Issue: 1/10/2011
Date of Implementation: 6/1/2011
Older Standard (superseded by this standard): GB/T 14800-1993
Quoted Standard: GB/T 6529; GB/T 13760; GB/T 14798; GB/T 16825.1
Adopted Standard: ISO 12236-2006, IDT
Regulation (derived from): National Standards Bulletin 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the top bar measured using the flat end of geosynthetics bursting strength approach. This standard is usually prescribed standard atmospheric humidity after the sample was. This Standard is applicable to all types of geosynthetics, but not more than 10 mm aperture of the material used.

GB/T 14800-2010: Geosynthetics -- Static puncture test (CBR test)

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Geosynthetics. Static puncture test (CBR test) ICS 59.080.70 W59 National Standards of People's Republic of China Replacing GB/T 14800-1993 Geosynthetics Static bursting test (CBR method) (ISO 12236.2006, IDT) Issued on. 2011-01-10 2011-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard uses the re-translation method identical with ISO 12236.2006 "Geosynthetics static bursting test (CBR method)" (in English Version). This standard and ISO 12236.2006 the following editorial changes. --- Normative references, reference is made to international standards corresponding to our standards, ISO 554 test standard atmosphere by the equivalent Adoption of ISO 139 GB/T 6529 in place; --- Delete directories and foreword; --- Chapter 6 on the sample size increased injection; --- Deleted Figures 2, 4a) and 4b) NOTE content. This standard replaces GB/T 14800-1993 "geotextile bursting strength test method." This standard and GB/T 14800-1993 Main The following differences. --- Standard name changed to "Geosynthetics static bursting test (CBR method)"; --- Scope added sample requirement that the pore size of not more than 10mm of material; --- Deleted the term "modification ratio"; --- Rate of movement from the top bar (60 ± 5) mm/min to (50 ± 5) mm/min; --- Remove the top strut predetermined height of 100mm; --- Remove the clamping device shall be greater than the specified base height of 100mm; --- Add "pre-tension of 20N, start recording displacement"; --- Remove Appendix A. The standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee based textile branch (SAC/TC209/SC1) centralized. This standard by the Shaoxing Textile Institute Jiangnan Branch Co., Textile Standard (Beijing) Co., Ltd. is responsible for drafting Inspection and Certification Center. The main drafters of this standard. Zhuangxiao Xiong, Zhou Hong, Wu Yani. This standard replaces the standards previously issued as follows. --- GB/T 14800-1993. Geosynthetics Static bursting test (CBR method)

1 Scope

This standard specifies the blunt end top bar measuring geosynthetics bursting strength of Methods. This method is usually prescribed in the standard atmosphere on the sample after the humidity was. This standard applies to all types of geosynthetics, but not material for the pore size greater than 10mm.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6529 Textiles conditioning and testing using standard atmosphere (GB/T 6529-2008, ISO 139.2005, MOD) GB/T 13760 Geosynthetics sampling and sample preparation (GB/T 13760-2009, ISO 9862.2005, IDT) GB/T 14798 Geosynthetics site identification identification (GB 14798-2008, ISO 10320.1999, IDT) Inspection and correction tension and (or) pressure testing machine force measuring system. GB/T 16825.1 of static uniaxial testing machines - Part 1 Associate (GB/T 16825.1-2008, ISO 7500-1.2004, MOD)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Top pressure plungerforce Top bar at a constant rate of displacement until the specimen top pressure when the measured force to penetrate the sample shown in Figure 1. Note. The top pressure in kN (kN) indicates. 3.2 Bursting strength push-throughforce Fp Every single maximum top pressure test recorded, shown in Figure 1. NOTE. bursting strength expressed as kN (kN). 3.3 Displacement displacement Since the beginning of the pre-tension 20N, top bar distance traveled, see Figure 1. NOTE. The shifts are expressed in millimeters (mm). 3.4 Bursting displacement push-throughdisplacement hp Top of displacement when breaking strength Fp, see Figure 1. NOTE. Bursting displacement in millimeters (mm) Fig. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14800-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14800-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14800-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14800-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14800-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14800-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.