GB/T 14780-2010 English PDF

US$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14780-2010: Earth-moving machinery -- Drain, fill and level plugs
Status: Valid

GB/T 14780: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14780-2010	154	Add to Cart	3 days	Earth-moving machinery -- Drain, fill and level plugs	Valid
GB/T 14780-1993	199	Add to Cart	2 days	Earth-moving machinery. Drain, fill and level plugs	Obsolete

Similar standards

GB/T 17300   GB/T 16936   GB/T 17301   GB/T 45375   GB/T 14781   GB/T 14782   

Basic data

Standard ID: GB/T 14780-2010 (GB/T14780-2010)
Description (Translated English): Earth-moving machinery -- Drain, fill and level plugs
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 8,840
Date of Issue: 2010-12-01
Date of Implementation: 2011-03-01
Older Standard (superseded by this standard): GB/T 14780-1993
Quoted Standard: GB/T 193; GB/T 196; GB/T 7306.2; GB/T 20670; ISO 725-1987; ISO 4510-1-1987
Adopted Standard: ISO 6302-1993, IDT
Regulation (derived from): National Standard Approval Announcement 2010 No.9 (Total No.164)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the ISO 4510-1: 1987 with the use of hand tools listed in the form of plug various parts, shapes and sizes so that you can easily plug removal and installation at the job site, This standard does not require plug manufacturing requirements. That size and material, This standard applies to earthmoving machinery replacement of oil, coolant, draining hydraulic oil and fuel use, liquid and liquid plus snail race.

GB/T 14780-2010: Earth-moving machinery -- Drain, fill and level plugs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery. Drain, fill and level plugs ICS 53.100 P97 National Standards of People's Republic of China Replacing GB/T 14780-1993 Earthmoving machinery drain, add liquid and level plug Earth-movingmachinery-Drain, filandlevelplugs (ISO 6302.1993, IDT) Issued on. 2010-12-01 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 6302.1993 "moving machinery drain, add liquid and level plug" (in English). This standard is equivalent translation ISO 6302.1993. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Deleted international standards foreword; --- To ISO 6302.1993 international standard referenced with the international standard has been adopted as a standard in place of the corresponding country; --- By drawing a provision of mechanical adjustments and 2 in view of Figure 1; --- Instead of using the decimal point as a decimal point ",". ","; --- Increased by reference. This standard is GB/T 14780-1993 "moving machinery drain, add liquid and level plug" amendments. This standard compared with GB/T 14780-1993, the main changes are as follows. --- Increasing the foreword; --- Increasing the normative references; --- Table 1, Table 2, an increase of ISO 6302.1993 in the corresponding inch thread dimensions. This standard replaces GB/T 14780-1993. The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard was drafted. Tianjin Construction Machinery Research Institute. The main drafters. Zhang Lijuan. This standard replaces the standards previously issued as follows. --- GB/T 14780-1993. Earthmoving machinery drain, add liquid and level plug

1 Scope

This standard specifies the ISO 4510-1. 1987 are listed in the form of plug for use with hand tools various parts, shapes and specifications to It will be able to easily remove and install the plug at the job site. This standard does not specify plug manufacturing requirements, namely size and material. This standard applies to earthmoving machinery to replace the drain oil, coolant, hydraulic oil and fuel use, and add fluid level plug.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 193 series ordinary thread diameter and pitch (GB/T 193-2003, ISO 261.1998, MOD) GB/T 196 common thread basic size (GB/T 196-2003, ISO 724.1993, MOD) GB/T 7306.2 55 ° sealing pipe thread Part 2. internal Taper internal and external threads (GB/T 7306.2-2000, eqv ISO 7-1.1994) GB/T 20670 unified thread diameter and number of teeth Series (GB/T 20670-2006, ISO 263. 1973, MOD) ISO 725. 1987 ISO inch screw threads - Basic dimensions ISO 4510-1. 1987 Earth-moving machinery repair tools - Part 1. General maintenance and adjustment tools

3 form and main dimensions

3.1 A-type and B-type plug A type and B-type plugs should look like Figure 1 and Table 1 below. a) A SQUARE countersunk screw plug b) B type hex head plug figure 1 Table 1 millimeters (inches) A tapered pipe thread (GB/T 7306.2) A B Shen hole width b S1 Shen hole depth (minimum) t1 Head width b S2 Head height (nominal) k1 R1/8 (1/8-27NPTF) - - 12 (7/16) (3/16) R1/4 (1/4-18NPTF) - - (9/16) (3/16) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14780-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14780-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14780-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14780-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14780-2010?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14780-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.