GB/T 14566.3-2011 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14566.3-2011: Specification and type for bursting discs -- Part 3: Flat bursting discs
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14566.3-2011	189	Add to Cart	3 days	Specification and type for bursting discs -- Part 3: Flat bursting discs	Valid

Similar standards

GB/T 15385   GB/T 15382   GB/T 13004   GB/T 45439   GB/T 14566.4   GB/T 14566.1   

Basic data

Standard ID: GB/T 14566.3-2011 (GB/T14566.3-2011)
Description (Translated English): Specification and type for bursting discs -- Part 3: Flat bursting discs
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J74
Classification of International Standard: 13.230
Word Count Estimation: 8,833
Date of Issue: 2011-12-30
Date of Implementation: 2012-06-01
Quoted Standard: GB 567.1; GB 567.2; GB 567.3; GB 567.4
Regulation (derived from): Announcement of Newly Approved National Standards No. 22 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the structure of plate-shaped rupture disc type, nominal diameter, different materials, design burst pressure ranges and other technical requirements. This section applies to pressure vessels, pressure piping, or other confined pressure equipment (hereinafter referred to as pressure equipment) to prevent overpressure or excessive use of vacuum and bursting disc safety device. This section does not apply to the following rupture disc: Operating pressure surge that may arise during the reaction rate reaches detonation pressure equipment. Defense and military equipment have special requirements for bursting disc safety device.

GB/T 14566.3-2011: Specification and type for bursting discs -- Part 3: Flat bursting discs

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification and type for bursting discs Part 3. Flat bursting discs ICS 13.230 J74 National Standards of People's Republic of China Disc types and parameters Part 3. Disc-shaped plate Part 3. Flatburstingdiscs Issued on. 2011-12-30 2012-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 14566 "Disc types and parameters" is divided into four parts. --- Part 1. Positive arch bursting discs; --- Part 2. Anti-arched bursting discs; --- Part 3. Disc-shaped plate; --- Part 4. graphite rupture disc. This section GB/T Part of 314,566. This section drafted in accordance with GB/T 1.1-2009 given rules. This part of the National boiler pressure vessel Standardization Technical Committee (SAC/TC262) and focal points. This part mainly drafted by. AVIC Chengdu Security Systems Co., Ltd., Shanghai Gas Industry Association, China Special Equipment Testing Institute, Shanghai Co., AQSIQ Huayi Group Construction Equipment Special Equipment Safety Supervision Bureau, Shenyang Aerospace Xinguang Security System Co., Ltd., Dalian Safety Equipment Co., Ltd., Shanghai Hua Li Safety Equipment Co., Ltd., Shenyang Institute of Special Equipment Inspection. The main drafters of this section. Yang Changjun, Xuzi Ping, Chen Hongping, Wei-Ming Zhou, Shou Binan, GAO Ji Xuan, Chen Zhaohui, Jin Zhiwei, Yu Jianliang, Ding from the country, Zhang Zhiyi, Weiyong Biao. Disc types and parameters Part 3. Disc-shaped plate

1 Scope

1.1 GB/T 14566 in the provisions of this part of the plate-shaped structure bursting disc type, nominal diameter, design burst pressure range of different materials Wai and other technical requirements. 1.2 section applies to pressure vessels, pressure piping, or other enclosed pressure equipment (hereinafter referred to as pressure equipment) to prevent overpressure or appeared Of the bursting disc safety devices used in vacuum. 1.3 does not apply to the following rupture disc --- May arise during the operation pressure surge, the reaction rate when arriving detonation pressure equipment. --- Defense and military equipment with special requirements bursting disc safety device. NOTE. Detonation. combustion speed material fast, reach 1000m/s or more, generating the usual blasting fundamentally different phenomenon, the phenomenon known as detonation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Part 1 GB 567.1 bursting disc safety device. Basic requirements GB 567.2 Part 2 bursting disc safety devices. Application, selection and installation GB 567.3 bursting disc safety devices Part 3. Classification and dimensions Section 4 GB 567.4 bursting disc safety device. type test

3 types and parameters

3.1 General requirements 3.1.1 Disc-shaped structure in the form of different plates, and can be divided into flat open seam bursting discs, bursting discs and ordinary type flat plate Groove Disc with three kinds of patterns. 3.1.2 plate-shaped bursting disc safety technology requirements and type test shall comply with the provisions of GB 567.1 ~ 567.4. 3.2 flat slotted Rupture Disc 3.2.1 rupture disc assembly carried by different functional accessories, flat open seam rupture disc can be divided into the following two kinds of types. a) flat slotted with reinforced ring bursting disc; b) flat slotted belt reinforcing ring and the bracket-type rupture discs. 3.2.2 flat open rupture disc designed at 20 ℃ of the seam burst pressure range specified in Table 1, structure type shown in Figure 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14566.3-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14566.3-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14566.3-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14566.3-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.