Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 14523-2007 English PDF

US$674.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14523-2007: Reaction to fire tests -- Ignitability of building products using a radiant heat source
Status: Valid

GB/T 14523: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 14523-2007674 Add to Cart 4 days Reaction to fire tests -- Ignitability of building products using a radiant heat source Valid
GB/T 14523-1993679 Add to Cart 5 days Test method for ignitability of building materials Obsolete

Similar standards

GB 13495.1   GB/T 14403   GB/T 14402   GB/T 41382   GB/T 16840.3   GB/T 16840.2   

Basic data

Standard ID: GB/T 14523-2007 (GB/T14523-2007)
Description (Translated English): Reaction to fire tests -- Ignitability of building products using a radiant heat source
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: C80
Classification of International Standard: 13.220.40
Word Count Estimation: 34,335
Date of Issue: 2007-12-21
Date of Implementation: 2008-06-01
Older Standard (superseded by this standard): GB/T 14523-1993
Quoted Standard: GB/T 2918; ISO 13943; ISO/TR 14697
Adopted Standard: ISO 5657-1997, IDT
Regulation (derived from): China National Standard Approval Announcement2007 No.13 (Total No.113)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the conditions under specified thermal radiation, of a thickness not exceeding 70 mm material, when placing composite or component level, the ignition of the fire test methods by plane. Appendix A gives the interpretation of the text and operating guidance notes, given the limitations described in Appendix B test.

GB/T 14523-2007: Reaction to fire tests -- Ignitability of building products using a radiant heat source


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reaction to fire tests. Lgnitability of building products using a radiant heat source ICS 13.220.40 C80 National Standards of People's Republic of China GB/T 14523-2007/ISO 5657.1997 Replacing GB/T 14523-1993 Reaction to fire tests of building products in a radiant heat source Fire Test Method (ISO 5657.1997, IDT) Posted 2007-12-21 2008-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Test principle 2 5 products fit 2 6 Sample Preparation 2 7 test device 4 8 Test Environment 16 9 device installation procedures and requirements 18 10 Calibration 18 11 Test Procedure 18 12 Expression of results 20 13 20 Test Report Appendix A (informative) text annotations and Operation Guide 22 Application of Annex B (informative) Test and restrictions 25 Annex C (informative) higher heat flux 26 Annex D (informative) sustained surface ignition time than 27 References 28 GB/T 14523-2007/ISO 5657.1997

Foreword

This standard is identical with ISO 5657.1997 "fire test fire test of building products using a radiant heat source response" (English Chinese Version). For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Deleted directory and international standards foreword. This standard replaces GB/T 14523-1993 "building materials fire test methods." This standard and GB/T 14523-1993 compared to the main changes are as follows. --- The revised standard name is "test fire test building products using a radiant heat source for reaction to fire"; --- Increasing the substantially flat surface, the article, the definition of a sample (this edition 3.3,3.8,3.9); --- Temperature monitor resolution is set to ± 2 ℃ (edition 7.6), the old standard resolution set at ± 1 ℃ (1993 edition of 3.3.2); --- Clear requirements for each different surface fire by preparing five samples (this version 6.1.1) in each irradiance level, and Older If the standard required to determine the actual or weak side face by the fire, then the weak side or actual test surfaces exposed to fire (1993 edition 5.5.2); --- Increased the thermal inertia of the test article's substrate and substrate requirements (edition 6.2); --- Means of increasing the electrical connections and prevent electronic interference requirements (edition 9.4); --- Radiation cone of radiation illumination requirements have been revised (1993 version 3.1.3, this version 7.2.2), while the amount of the radiometer Cheng requirements have been revised (edition 7.7); --- The new standard increased the reflective laminate requirements (edition 6.5); --- Increase the informative appendix "text annotations and Operation Guide" (see Appendix A); --- Increase the informative appendix "test application and limitations" (see Appendix B); --- Increase the informative appendix "higher heat flux" (see Appendix C); --- Increase the informative appendix "sustained surface ignition time alignment" (see Appendix D); --- Added "References." This standard Annex A, Annex B, Annex C and Annex D are informative appendices. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the National Standardization Technical Committee on Fire VII Technical Committee (SAC/TC113/SC7) centralized. This standard is drafted by. Ministry of Public Security of Sichuan Fire Research Institute. Participated in the drafting of this standard. Xinjiang Uygur Autonomous Region Public Security Fire Department. The main drafters of this standard. Zeng Xu Bin, Zhao Chenggang, YAO Jian, Li Zhao, Deng Xiaobing, Zhang Lu. This standard replaces the standards previously issued as follows. --- GB/T 14523-1993. GB/T 14523-2007/ISO 5657.1997

Introduction

Fire is a complex phenomenon. fire behavior and the impact depends on many interrelated factors, combustion performance of building materials and products By the nature of the fire, using methods and materials material environment where decision. "Reaction to fire" test principle as the ISO /T R3814 in He explained. This standard specifies the test methods for material potential fire hazard characteristics under conditions of heat radiation and ignition source, it can not work alone Guide for the direct evaluation of fire behavior and fire safety. However, this test can be used to compare the combustion behavior of materials in order to determine the material Ignitability. The term "fire resistance" is defined in ISO 13943 under specified test conditions is due to the influence of an external heat source, the sample is ignited difficult Reciprocity. Fire risk assessment, fire is one of the combustion performance requires primary consideration. However, as the impact of the fire can not be built The main combustion performance of building fire development. This test does not depend on the use of asbestos substrate. Security Warning. Note combustion test, the specimen may produce toxic or harmful gases, can take appropriate precautions to protect the health, And pay attention to the use of A. 7 safety recommendations given. GB/T 14523-2007/ISO 5657.1997 Reaction to fire tests of building products in a radiant heat source Fire Test Method

1 Scope

This standard specifies thermal radiation under specified conditions, the material thickness of no more than 70mm, the composite or component horizontally, its subject Fire Test Method fire surface. Appendix A provides for interpretation of the text and operational guidance notes, in Appendix B gives a description of the limitations of the test.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2918 standard plastic sample conditioning and environmental tests (GB/T 2918-1998, idt ISO 291.1997) ISO 13943 Fire Safety Glossary ISO /T R14697 Reaction to fire tests of building products selected substrate Guide

3 Terms and Definitions

Established in ISO 13943 and the following terms and definitions apply to this standard. 3.1 Single material or finished composite material (including air-gap), such as sandwich panels. 3.2 In the building structure can usually identify the individual discrete composite materials, such as coatings or laminates. 3.3 Unevenness on the surface of a plane does not exceed ± 1mm of. 3.4 Heating the article surface subjected to the test conditions. 3.5 Irradiated contains this point is infinitely small bins on the energy flux to the surface of the cell area ratio. 3.6 Single substance or uniformly dispersed mixture, such as metal, stone, wood, concrete, mineral wool, polymer. 3.7 Any flame appears at the top of the fire plume samples, including sustained fire or flame briefly. GB/T 14523-2007/ISO 5657.1997
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14523-2007_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14523-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14523-2007_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14523-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14523-2007?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14523-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.