GB/T 14385-2008 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14385-2008: Woodworking machines -- Thickness planning-machines with rotary cutter block for one-side dressing -- Nomenclature and acceptance conditions
Status: Valid

GB/T 14385: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14385-2008	194	Add to Cart	3 days	Woodworking machines -- Thickness planning-machines with rotary cutter block for one-side dressing -- Nomenclature and acceptance conditions	Valid
GB/T 14385-1993	199	Add to Cart	2 days	Woodworking machines. Thickness planing machines with rotary cutterblock for one side dressing. Accuracy tests	Obsolete

Similar standards

GB/T 40337   JB/T 13910.3   GB/T 8118   GB/T 14388   GB/T 14384   GB/T 14386   

Basic data

Standard ID: GB/T 14385-2008 (GB/T14385-2008)
Description (Translated English): Woodworking machines -- Thickness planning-machines with rotary cutter block for one-side dressing -- Nomenclature and acceptance conditions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J65
Classification of International Standard: 79.120.10
Word Count Estimation: 10,199
Date of Issue: 2008-04-22
Date of Implementation: 2008-10-01
Older Standard (superseded by this standard): GB/T 14385-1993
Quoted Standard: GB/T 17421.1-1998; ISO 7984-1989
Adopted Standard: ISO 7568-1986, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.6 (Total No.119)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms sided pressure planer each part. While referring to GB/T 17421. 1-1998, provides for inspection of geometric precision machine tools, and given the appropriate tolerances for general purposes, ordinary precision machine tools. This standard only requires that the machine accuracy test, the test does not apply to the operation of the machine. Does not apply to the characteristics of the machine test, these tests are generally advised to test for accuracy in front of the machine. This standard for precision machine work without mandatory testing. It should be between the user and the manufacturer prior agreements separately. This standard applies to ISO 7984-1989 in Section 12. 212 of those machine instructions.

GB/T 14385-2008: Woodworking machines -- Thickness planning-machines with rotary cutter block for one-side dressing -- Nomenclature and acceptance conditions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Woodworking machines. Thickness planing machines with rotary cutterblock for one-side dressing. Nomenclature and acceptance conditions ICS 79.120.10 J65 National Standards of People's Republic of China GB/T 14385-2008/ISO 7568. 1986 Replacing GB/T 14385-1993 Sided pressure planer woodworking machines Nomenclature and (ISO 7568. 1986, IDT) Posted 2008-04-22 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 7568. 1986. "one-sided pressure planer woodworking machines - Nomenclature and acceptance conditions" (in English). For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Remove the French terminology and Appendix A; --- Deleted international standards foreword; --- Increasing the normative references of Lead; --- Other international standard ISO 7568 referenced with the international standard has been adopted as a standard in place of the corresponding country; --- Tolerances in Table 2 made individual adjustments. This standard is GB/T 14385-1993 "one-sided pressure planer woodworking accuracy" of amendments. This standard and GB/T 14385-1993 compared to the main changes as follows. --- Increasing the term; --- G2 test items have been adjusted; --- The geometric accuracy inspection table, "tolerance" to "tolerance"; --- Remove the work of the accuracy. The standard proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Woodworking Machine and Tool Standardization Technical Committee. This standard drafting unit. Woodworking Machine Tool Research Institute, Fuzhou, Putian, Fujian Tie Machinery Co., Ltd. The main drafters of this standard. Xiao Xiaohui, Zhang Shengxing. This standard replaces the standards previously issued as follows. --- GB/T 14385-1993. GB/T 14385-2008/ISO 7568. 1986 Sided pressure planer woodworking machines Nomenclature and

1 Scope

This standard specifies the terms single-sided pressure planer (hereinafter referred to as the machine) of each part, while referring to GB/T 17421.1-1998, provides Geometric accuracy of machines tested and given the appropriate tolerances for general use, general precision machine tools. This standard only requires that the machine accuracy test, does not apply to running test machine (such as vibration, unusual noise, reptiles and other parts of the seized Experience), does not apply to machine features test (such as speed, feed rate, etc.), these tests are generally advised to test for accuracy in front of the machine. This standard is the work of precision machine tool inspection will not be mandatory. It should be between the user and the manufacturer prior agreement separately. This standard applies to ISO 7984. 1989 machine tools 12.212 those indicated.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines (eqv ISO 230-1.1996) ISO 7984. 1989 Technology Category Woodworking machines Woodworking machines and auxiliary equipment woodworking

3 Short Description

3.1 standard in all dimensions and tolerances are in millimeters. 3.2 This standard should be used with reference to GB/T 17421.1-1998, especially the test installation, spindles and other moving parts of the machine before Temperature, and test methods. Gage error should not exceed 1/3 of the tolerance of the subject project. 3.3 standard geometric accuracy test order is given by the machine tool assembly sequence, which is not limited by the order of the actual inspection time. In order to facilitate Installation and testing of the seizure, inspection in any order. The standard test given project must be itemized or not always be able to test 3.4 test machine. 3.5 Test Project selection is determined by the user, and in agreement with the manufacturer, clearly defined at the time of ordering the machine. Selected test Projects are often of interest about the performance of your machine. 3.6 movement in the direction of the workpiece called longitudinal movement. 3.7 When determining the minimum conversion time measuring range is different tolerances specified in this standard on measuring range should be considered a value of 0.01mm tolerance (See GB/T 17421.1-1998 2.3.1.1).

4 Terms

Tools - Terminology Figure 1 and Table 1. GB/T 14385-2008/ISO 7568. 1986 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14385-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14385-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14385-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14385-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14385-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14385-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.