GB/T 14330-2008 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 14330-2008: Mechanically clamped carbide side milling cutters Status: Valid GB/T 14330: Historical versions
Basic dataStandard ID: GB/T 14330-2008 (GB/T14330-2008)Description (Translated English): Mechanically clamped carbide side milling cutters Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J41 Classification of International Standard: 25.100.20 Word Count Estimation: 7,769 Date of Issue: 2008-11-04 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 14330-1993 Regulation (derived from): National Standard Approval Announcement 2008 No.18 (Total No.131) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the carbide-off three-blade knife mirror type and size, appearance, surface roughness, basic requirements for marking and packaging, positional tolerance, material and hardness. This standard applies to a diameter of 63mm ~ 160mm, Width 6mm ~ 12mm carbide-off three-blade knife mirror (hereinafter referred to as the cutter). GB/T 14330-2008: Mechanically clamped carbide side milling cutters---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Machanically clamped carbide side milling cutters ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 14330-1993 Carbide machine clip three-blade cutter Posted 2008-11-04 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 14330-1993 "Carbide machine clip three-blade cutter." This standard and GB/T 14330-1993 compared to the main changes are as follows. --- Modify the original standard of 3.4 (the blade grouping code amended as follows. blade use code); --- Modify the original standard of 4.2 (on the surface roughness of the surface and the cutter body bore two bearing end surface modification limit R Rao 1.25μm As. R Rao 0.8 m); --- Modify the original standard of 4.4 (with the clamping member 45 steel having a hardness of not less than HRC40 amended as follows. hardness low clamping member To 40HRC); --- Cancel the original standard performance test portion. Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Lucy Liu. This standard replaces the standards previously issued as follows. --- GB/T 14330-1993. Carbide machine clip three-blade cutter1 ScopeThis standard specifies the machine folder carbide cutter three-blade type and size, appearance, surface roughness and position tolerances, material and hardness, Marking and packaging and other basic requirements. This standard applies to a diameter of 63mm ~ 160mm, width 6mm ~ 12mm machine folder carbide cutter blade on three sides (hereinafter referred to as milling Knife).2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2075 Classification and use of cutting large groups and groups of application of hard cutting materials classification code (GB/T 2075- 2007, ISO 513.2004, IDT) GB/T 6119.2 face milling cutter technical conditions GB/T 6132 cutters and cutter arbor swap Size (GB/T 6132-2006, ISO 240.1994, IDT)3 type and size3.1 Carbide machine clip three-blade cutter types and dimensions in Figure 1 and Table 1. Figure 1 machine folder carbide cutter blade on three sides ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14330-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14330-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 14330-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14330-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 14330-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14330-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
