GB/T 1429-2025 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1429-2025	RFQ	ASK	3 days	Proximate analysis of carbon materials	Valid
GB/T 1429-2009	85	Add to Cart	Auto, < 3 mins	Carbon materials -- Determination of the ash content	Valid
GB/T 1429-1985	199	Add to Cart	2 days	Carbon materials--Determination of the ash content	Obsolete

Basic data

Standard ID: GB/T 1429-2025 (GB/T1429-2025)
Description (Translated English): Proximate analysis of carbon materials
Sector / Industry: National Standard (Recommended)
Date of Implementation: 2026-03-01
Older Standard (superseded by this standard): GB/T 1429-2009, GB/T 24527-2009

GB/T 1429-2009: Carbon materials -- Determination of the ash content

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Carbon materials. Determination of the ash content ICS 29.050 Q52 National Standards of People's Republic of China Replacing GB/T 1429-1985 Carbon materials - Determination of ash content Posted 2009-07-15 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 1429-1985 "Determination of ash content of carbon materials." The main difference compared with the original standard criteria are as follows. --- Increase the "scope" section; --- Original standard test procedures in the bottom block sample "size is 0.3mm" to "particle size of 0.2mm"; --- Original standard test conditions of high temperature furnace and the "850 ± 20 ℃" to "850 ℃ ± 10 ℃"; --- Standardized format and some units. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard was drafted. Wuhan University of Science and Technology, Metallurgical Industry Information Standards Institute, Jilin Carbon Co., Ltd. The main drafters of this standard. Zhao Minlun, Ho Xuan-ming, Oriole, Wu Yanhua, Sun Wei. This standard replaces the standards previously issued as follows. --- GB/T 1429-1978, GB/T 1429-1985. Carbon materials - Determination of ash content

1 Scope

This standard specifies the terms and definitions, instruments and equipment for measuring ash content of carbonaceous materials, and prepared to take the test step, the junction of the sample If calculated, precision and test reports. This standard applies to the determination of the ash content of the carbon materials.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1427 carbon material sampling method GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Carbon materials air dried to constant weight the sample burning residue of the original amount of the sample accounted for the percentage content of 850 ℃ ± 20 ℃. 3.2 Carbon materials at a temperature not exceeding 50 ℃ drying 1h continuous quality changes after the sample is not more than 0.1%, then the sample is called air Dried samples.

4 instruments and equipment

4.1 Analysis of balance. a sense of the amount of 0.1mg. 4.2 porcelain Ark. size not less than 60mm × 25mm × 16mm. 4.3 Glass dryers. built-in color gel. 4.4 crucible tongs. 4.5 high-temperature furnace. with thermostat can keep 850 ℃ ± 10 ℃, together with thermocouple and temperature indicating instrument. High temperature furnace rear wall having an insertion Thermocouple circular hole. Position of the hole should be the point of contact thermocouple heat in an oven heated area, the door has a hole diameter of 15mm ~ 20mm.

5 samples taken and prepared

5.1 carbon materials sampling conducted in accordance with GB/T 1427 regulations. 5.2 Preparation of the sample taken 5.1 to a particle size of not more than 20mm, the sample quality is not less than 0.5kg. 5.3 The sample was provided by quartering shrink 5.2 points, take 50g ~ 60g chronology, all through the 0.15mm standard sieve mesh. 5.4 5.3 The sample provided air drying, air drying method. the sample into the dish, spread into a uniform thin layer, at temperature Dried at no more than 50 ℃, reach air dry. 5.5 Carbon Paste sample size is 0.5mm. Bottom block samples after electrolysis is prepared, to get rid of the surface of the electrolyte, a particle size of 0.2mm. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1429-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1429-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1429-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1429-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1429-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1429-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.