GB/T 13814-2025 English PDFUS$609.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13814-2025: Covered electrodes for manual metal arc welding of nickel and nickel alloys Status: Valid GB/T 13814: Historical versions
Basic dataStandard ID: GB/T 13814-2025 (GB/T13814-2025)Description (Translated English): Covered electrodes for manual metal arc welding of nickel and nickel alloys Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J33 Classification of International Standard: 25.160.20 Word Count Estimation: 30,367 Date of Issue: 2025-06-30 Date of Implementation: 2026-01-01 Older Standard (superseded by this standard): GB/T 13814-2008 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 13814-2025: Covered electrodes for manual metal arc welding of nickel and nickel alloys---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13814-2025ICS 25.160.20 CCSJ33 National Standard of the People's Republic of China Replaces GB/T 13814-2008 Nickel and nickel alloy welding rods (ISO 14172.2023, Weldingconsumables-Coveredelectrodesfor Released on June 30, 2025 Implementation on January 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Model 1 5 Technical Requirements 2 6 Test Methods 12 7 Amendment Rules 13 8 Inspection Rules 13 9 Technical conditions of supply 14 Appendix A (Informative) Comparison table of structure numbers between this document and ISO 14172.2023 15 Appendix B (Informative) Technical differences between this document and ISO 14172.2023 and their causes 16 Appendix C (Informative) Instructions for use of welding rods 17 Appendix D (Informative) Comparison of Welding Rod Models 22 Reference 25 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 13814-2008 Nickel and Nickel Alloy Welding Rods. Compared with GB/T 13814-2008, except for the structural adjustment and In addition to the logical changes, the main technical changes are as follows. a) Added ENi6056, ENi6172, ENi6045, ENi6055, ENi6093B, ENi6132, ENi1069B, ENi Chemical composition and tensile property requirements for 12 models, including 1362, ENi6007, ENi6035, ENi6058 and ENi6117B (See 5.3 and 5.4); b) Some chemical composition requirements have been modified (see 5.3, 4.4 of the.2008 edition); c) The provisions for sample preparation of deposited metal chemical composition and arbitration test methods have been changed (see 6.3, 5.2 of the.2008 edition); d) The requirements for the thickness of the weld overlay isolation layer have been changed (see 6.4.1, 5.1.1 of the.2008 edition); e) The test specimen preparation requirements have been changed (see 6.4.2, see 5.3.1 of the.2008 edition); f) The tensile test requirements have been changed (see 6.4.3, see 5.3.2 of the.2008 edition); g) Added the rules on amendment (see Chapter 7); h) The inspection rules have been changed (see Chapter 8, see Chapter 6 of the.2008 edition); i) The requirements for “packaging, marking and quality certificate” have been deleted (see Chapter 7 of the.2008 edition); j) Added the requirements for “Technical Supply Conditions” (see Chapter 9). This document is modified to adopt ISO 14172.2023 “Welding materials — Classification of electrodes for manual metal arc welding of nickel and nickel alloys”. Compared with ISO 14172.2023, this document has many structural adjustments. The structural number changes between the two documents are shown in the table below. See Appendix A; This document has many technical differences compared to ISO 14172.2023. A list of these technical differences and their reasons is given in Appendix B. The following editorial changes have been made to this document. --- To coordinate with the existing standard, the name of the standard is changed to "Nickel and Nickel Alloy Welding Rods"; ---The chemical composition code of Ni6062, NiCr15Fe8NbMo, is changed to NiCr15Fe8Nb. There is no requirement for Mo content; --- Deleted Appendix A (informative) welding material naming system, and expressed the relevant content in 4.2 and Appendix C.1; --- Deleted the DIN1736.1985 model comparison in Appendix C (informative) welding rod model comparison, updated AWSA5.11/ Models of A5.11M.2018 and JISZ3224.2010; Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Welding Standardization (SAC/TC55). This document was drafted by. Harbin Welding Research Institute Co., Ltd. of China Machinery Engineering Corporation, Sichuan Atlantic Welding Materials Co., Ltd. Harbin Well Welding Co., Ltd., Kunshan Jingqun Welding Materials Technology Co., Ltd., Tianjin Daqiao Welding Materials Group Co., Ltd., Tianjin Jin Bridge Welding Materials Group Co., Ltd., Jinzhou Special Welding Rod Co., Ltd., Zhejiang Shenjia Welding Materials Technology Co., Ltd., Harbin Boiler Plant Co., Ltd. Shanghai Nuclear Engineering Research and Design Institute Co., Ltd., Beijing Jinwei Welding Materials Co., Ltd., Central Iron and Steel Research Institute Co., Ltd., Fushun Special Special Steel Co., Ltd., Wuhan Tiemao Welding Materials Co., Ltd., Hunan Valin Xiangtan Iron and Steel Co., Ltd., Jiangsu University, China National Nuclear Power Engineering Co., Ltd., Xi'an Thermal Engineering Research Institute Co., Ltd., Anqing CSIC Power Equipment Co., Ltd., Lanzhou Lanshi Superalloy New Materials Co., Ltd. Co., Ltd., Beijing Guangsha Environmental Energy Technology Co., Ltd. The main drafters of this document are. Shi Baicheng, Jiang Yong, Xu Kai, Tong Tianwang, Wen Jin, Xiao Huiying, Pei Kai, Zheng Xiaodong, Xu Xiangjiu, Zhang Junbao, Wang Shishan, Qi Yanchang, Wang Shucai, Yang Hengchuang, Zhou Wenhao, Luo Rui, Ma Jing, Yin Hongfei, Fang Huijun, Yang Wu, Qu Yinglin, Yang Zijia, Chen Yan, Zhao Weijun, Yao Junjun, Zhang Guozhu, Yang Cheng, Zhang Guo, Shi Ji, and Hao Runze. This document was first issued in.1992, revised for the first time in.2008, and this is the second revision. Nickel and nickel alloy welding rods 1 Scope This document specifies the types, technical requirements, test methods, rounding rules, inspection rules and supply technical conditions of nickel and nickel alloy welding rods. content. This document applies to nickel and nickel alloy electrodes for stick arc welding (hereinafter referred to as "electrodes"). 2 Normative references The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2652 Destructive tests on welds of metallic materials - Longitudinal tensile test of weld metal in fusion welded joints (GB/T 2652- 2022, ISO 5178.2019, IDT) GB/T 3323.1 Non-destructive testing of welds - Radiographic testing - Part 1.Film techniques using X-ray and gamma rays (GB/T 3323.1- 2019, ISO 17636-1.2013, MOD) GB/T 3375 Welding terminology GB/T 5185 Welding and related process code (GB/T 5185-2005, ISO 4063.1998, IDT) GB/T 8170-2008 Rules for rounding off values and expression and determination of limit values GB/T 25774.1-2023 Inspection of welding materials Part 1.Preparation of test specimens for mechanical properties of steel, nickel and nickel alloy deposited metal (ISO 15792-1.2020, MOD) GB/T 25775 Technical conditions for supply of welding consumables - Product types, dimensions, tolerances and markings (GB/T 25775-2010, ISO 544.2003, MOD) GB/T 25777 Welding materials - Preparation of deposited metal chemical analysis samples (GB/T 25777-2010, ISO 6847.2000, IDT) GB/T 25778 Welding Consumables Procurement Guide (GB/T 25778-2010, ISO 14344.2010, MOD) GB/T 37910.1-2019 Acceptance levels for non-destructive testing of welds by radiographic testing - Part 1.Steel, nickel, titanium and their alloys (ISO 10675-1.2016, MOD) 3 Terms and Definitions The terms and definitions defined in GB/T 3375 and GB/T 5185 apply to this document. 4 Models 4.1 Model Classification Welding rod models are classified according to the chemical composition of the deposited metal. Instructions for use of welding rods are given in Appendix C. This document and other relevant standards for welding rods See Appendix D for model comparison. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13814-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 13814-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13814-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13814-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13814-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13814-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
