GB/T 13748.14-2013 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13748.14-2013: Chemical analysis methods of magnesium and magnesium alloys -- Part 14: Determination of nickel content -- Dimethylglyoxime spectrophotometric method Status: Valid GB/T 13748.14: Historical versions
Basic dataStandard ID: GB/T 13748.14-2013 (GB/T13748.14-2013)Description (Translated English): Chemical analysis methods of magnesium and magnesium alloys -- Part 14: Determination of nickel content -- Dimethylglyoxime spectrophotometric method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H12 Classification of International Standard: 77.120.10 Word Count Estimation: 8,888 Older Standard (superseded by this standard): GB/T 13748.14-2005 Adopted Standard: ISO 4058-1977, NEQ Regulation (derived from): National Standards Bulletin 2013 No. 23 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the method for the determination of magnesium and magnesium alloys of nickel content. This standard applies to the determination of magnesium and magnesium alloys of nickel content. 20% of the measuring range of 0. 000 to 0. 050%. GB/T 13748.14-2013: Chemical analysis methods of magnesium and magnesium alloys -- Part 14: Determination of nickel content -- Dimethylglyoxime spectrophotometric method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Chemical analysis methods of magnesium and magnesium alloys Part 14. Determination of nickel content Dimethylglyoxime trophotometric method ICS 77.120.10 H12 National Standards of People's Republic of China Replacing GB/T 13748.14-2005 Magnesium and its alloys - Determination of nickel content. Part 14 Dimethylglyoxime spectrophotometry -Part 14. Determinationofnickelcontent (ISO 4058. 1977, Magnesiumanditsaloys-Determinationofnickel -Photometricmethodusingdimethylglyoxime, NEQ) Issued on. 2014-08-01 2013-11-27 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 13748 "analysis methods of magnesium and magnesium alloys" is divided into 22 parts. --- Part 1. Determination of aluminum content; --- Part 2. Determination of tin content pyrocatechol violet spectrophotometry; --- Part 3. Determination of lithium content Flame atomic absorption spectrometry; --- Part 4. Determination of manganese content periodate spectrophotometry; --- Part 5. Determination of yttrium content inductor coupled plasma atomic emission spectrometry; --- Part 6. Determination of silver by flame atomic absorption spectrometry; --- Part 7. Determination of zirconium content; --- Part 8. rare earth content Gravimetric method; --- Part 9. Determination of iron content phenanthroline spectrophotometry; --- Part 10. Determination of silicon content - Molybdenum blue spectrophotometric method; --- Part 11. Determination of beryllium content Eriochrome cyanine R spectrophotometry; --- Part 12. Determination of copper content; --- Part 13. Determination of lead content by flame atomic absorption spectrometry; --- Part 14. Determination of nickel dimethylglyoxime spectrophotometry; --- Part 15. Determination of zinc content; --- Part 16. Determination of calcium content by flame atomic absorption spectrometry; --- Part 17. potassium content and sodium content - Flame atomic absorption spectrometry; --- Part 18. Determination of the chlorine content of silver chloride turbidimetric method; --- Part 19. Determination of titanium content security for spectrophotometric morpholino than methane; --- Part 20. ICP-AES determination of element contents; --- Part 21. photoelectric direct reading atomic emission spectroscopy method element content; --- Part 22. Determination of thorium content. The object is to have a standard adoption of Part 1, Part 4, Section 7, Section 8, Section 9, Section 10, Section 12, Part 9 Part 14, Part 15 and other amendments. This is Part 14. This section is in accordance with GB/T 1.1-2009 given rules drafted. This Part replaces GB/T 13748.14-2005 "Ding Determination of magnesium and magnesium alloy chemical analysis of nickel content dimethylglyoxime spectrophotometric law". This section compared with the GB/T 13748.14-2005, the main technical changes are as follows. --- Amend 3.14, as the "solution 1mL containing 0.004mg Nickel"; --- Re-edited in Table 1; --- In 6.5.2 "In the reagent blank solution" to the "reagent blank solution (without the nickel standard solution were) as a reference."; --- To increase the "lab report" requirement; --- Remove the "quality assurance and control" requirements; --- Prepared according to standard rules of text editing finishing. This section uses redrafted reference method ISO 4058. 1977 "magnesium and magnesium alloy of nickel dimethylglyoxime spectrophotometric determination", and ISO 4058. 1977 non-equivalent. The non-ferrous metal part by the National Standardization Technical Committee (SAC/TC243) centralized. This section is responsible for drafting units. Aluminum Corporation of China Zhengzhou Research Institute, China Nonferrous Metals Industry Quality Standards and Metrology Institute The study. This section is drafted. Northeast Light Alloy Co., Ltd., Southwest Aluminum limited liability company. Drafters of this section. High Zhenzhong, Zheng Yunlong, Zhou Bing, Chen Xiongli, Denglan Hong, Tan Jiaying, Choi Ji Hong, Liu Xin. This part of the standard replaces the previous editions are. --- GB/T 13748.14-2005, GB/T 13748.14-1992. Magnesium and its alloys - Determination of nickel content. Part 14 Dimethylglyoxime spectrophotometry1 ScopeThis section specifies the determination of magnesium and magnesium alloys of nickel content. This section applies to the determination of magnesium and magnesium alloys of nickel content. Determination of the range of 0.00020% to 0.050%.2 Method summarySample was dissolved in hydrochloric acid and nitric acid. Hydroxylamine hydrochloride, citric acid and thiourea as a masking agent. With chloroform extraction of nickel dimethylglyoxime Health Into the complex, then back-extracted with dilute hydrochloric acid, the nickel into the aqueous phase. Oxidation with bromine water and butyric Dimethylglyoxime color in ammonia solution. in 445nm wavelength spectrophotometer measured absorbance.3 Reagents3.1 hydrochloric acid (ρ = 1.19g/mL). 3.2 nitric acid (ρ = 1.42g/mL). Aqueous ammonia 3.3 (ρ = 0.90g/mL). 3.4 chloroform. 3.5 hydrochloric acid (119). 3.6 ammonia (119). 3.7 citric acid solution (300g/L). 3.8 hydroxylamine hydrochloride solution (100g/L). 3.9 thiourea solution (100g/L). 3.10 bromine saturated solution. 3.11 dimethylglyoxime in ethanol (10g/L). 3.12 Nickel standard stock solution (1mg/mL). Weigh 1.0000g of nickel [w (Ni) ≥99.9%] placed in 300mL beaker, covered Table dish. Was added 10mL of water and 10mL of nitric acid (3.2), heated until completely dissolved. Was added 10mL of hydrochloric acid (3.1), carefully evaporated to dryness, then 10mL of hydrochloric acid (3.1) is repeated again evaporated to dryness. Salts dissolved in water, heating to completely dissolve the salt. Moved into 1000mL volumetric flask with water Dilute to volume, and mix. 1mL solution containing 1mg nickel. 3.13 Nickel standard solution (0.08mg/mL). a nickel Pipette 8.00mL standard stock solution (3.12) in 100mL volumetric flask, diluted with water To the mark, and mix. This solution 1mL containing 0.08mg nickel. 3.14 Nickel standard solution (0.004mg/mL). a nickel standard solution Pipette 5.00mL (3.13) in 100mL volumetric flask, dilute with water to Volume, and mix the solution 1mL containing 0.004mg nickel. 3.15 bromothymol blue solution (1g/L). Weigh 0.100g bromothymol blue dissolved in 5mL of ethanol and transferred to 100mL volumetric flask, to Dilute with water to volume, and mix. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13748.14-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 13748.14-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13748.14-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13748.14-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13748.14-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13748.14-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
