GB/T 13663.1-2017 English PDF

US$439.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13663.1-2017: Polyethylene (PE) piping systems for water supply -- Part 1: General
Status: Valid

GB/T 13663.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13663.1-2017	439	Add to Cart	5 days	Polyethylene (PE) piping systems for water supply -- Part 1: General	Valid
GB/T 13663-2000	639	Add to Cart	4 days	Polyethylene pipes for water supply	Obsolete
GB/T 13663-1992	RFQ	ASK	3 days	Hight density polyethylene (HDPE) pipes for water supply	Obsolete

Similar standards

GB/T 15558.1   GB/T 10006   GB/T 15560   GB/T 13664   GB/T 13663.5   GB/T 13663.2   

Basic data

Standard ID: GB/T 13663.1-2017 (GB/T13663.1-2017)
Description (Translated English): Polyethylene (PE) piping systems for water supply -- Part 1: General
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 83.140.30
Word Count Estimation: 22,291
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 13663.1-2017: Polyethylene (PE) piping systems for water supply -- Part 1: General

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyethylene (PE) piping systems for water supply - Part 1. General ICS 83.140.30 G33 National Standards of People's Republic of China Partially replace GB/T 13663-2000 Water supply polyethylene (PE) pipe system Part 1. General principles (ISO 4427-1..2007, Plasticspipingsystems- Polyethylene (PE) pipesandfittingsforwatersupply-Part 1. General, MOD) 2017-12-29 Posted 2018-07-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions, symbols, abbreviations 2 4 material 6 5 Health Requirements 9 Appendix A (informative) This part of ISO 4427-1..2007 compared to the structural changes 10 Appendix B (informative) This part and ISO 4427-1..2007 technical differences and their causes 11 Appendix C (Informative) Operating temperature stress reduction factor of 13 Appendix D (Informative) Mixture changes 14 Appendix E (Normative) Determination of volatile content 16 Appendix F (Normative) Weatherability 17 References 18

Foreword

GB/T 13663 "water supply polyethylene (PE) pipe system" is divided into five parts. --- Part 1. General; --- Part 2. Pipe; --- Part 3. Pipe fittings; --- Part 4. Valves; --- Part 5. System Suitability. This section GB/T 13663 Part 1. This section drafted in accordance with GB/T 1.1-2009 given rules. This section GB/T 13663 and Part 2 jointly replace GB/T 13663-2000 "polyethylene pipe (PE) for water supply" and GB/T 13663-2000 compared to the main technical changes as follows. --- This part of the material instead of GB/T 13663-2000 performance requirements, and with reference to the content of ISO 4427-1..2007 drafting phase Related content --- Increase the "maximum working pressure of not more than 2.0MPa and reference working temperature of 20 ℃" requirements (Chapter 1 of this section); --- Added "terms and definitions, symbols, abbreviations" (Chapter 3 of this section); --- Added "mixed ingredients of the formula or production process changes, should be provided in accordance with this section new certificate of competency" requirements (This section 4.1); --- Modify the grading and naming of polyethylene compound ingredients, delete PE63 material classification and naming, add "mixed The long-term hydrostatic strength curve at 80 ℃ does not allow inflection point before 5000h (t < 5000h) (part 4.3); --- Deleted the design stress of PE63 material (part 4.4); --- Modification of the properties of polyethylene compounds to be measured in the form of pellets and pipe in the determination of two parts, of which the granular material Determination of the mixed ingredients increased performance density, volatile content, moisture content, carbon black dispersion/pigment dispersion, the appearance of grade, gray Points, tensile nominal strain and yield stress requirements; measured in the form of pipe mixed material properties for the new requirements added, increased Requirements for butt fusion - bonding tensile strength, weatherability, resistance to rapid crack propagation (S4) and resistance to slow crack growth (part 4.5); --- Polyethylene mixed material oxidation induction time of the test parameters and requirements from "200 ℃, ≥ 20min" to "210 ℃, ≥20min "(part 4.5); --- Increasing the "black mixture of carbon black in the average (initial) particle size range of 10nm ~ 25nm" requirements (Section 4.5); --- Added "welding compatibility of polyethylene compounds" requirements (Section 4.6); --- Added "health requirements" (Chapter 5 of this section); --- Increasing the informative appendix "This part of ISO 4427-1..2007 compared to the structural changes" (Appendix A of this section); --- Increasing the informative appendix "This part and ISO 4427-1..2007 technical differences and their causes" (Part B of this Appendix); --- Polyethylene pipe system temperature stress reduction factor adjusted to Appendix C, an increase of 25 ℃ and 35 ℃ pressure reduction system And "When the temperature is less than 20 ℃, the pressure reduction factor fT is 1.0" requirements (Appendix C of this section); --- Increasing the informative appendix "mixed ingredients change" (Part D of this section); --- Added a normative appendix "Determination of volatile content" (Appendix E of this section); --- Added a normative appendix "weatherability" (Appendix F of this section). This section uses the redrafted law to amend the use of ISO 4427-1..2007 "plastic pipe system for water supply polyethylene (PE) pipe and pipe Part 1. General Principles. This part of ISO 4427-1..2007 compared to the structural adjustment. Appendix A lists the clauses and sections of this section ISO 4427-1..2007 reg number control list. This section compared with ISO 4427-1..2007 there are technical differences. Relevant differences have been incorporated into the text and in the terms that they cover The margins are marked with a vertical single line (|). A list of these technical differences and their causes is given in Appendix B. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This part is proposed by China National Light Industry Council. This part of the National Plastics Standardization Technical Committee (SAC/TC48) centralized. This section drafted by. Shandong Shengbang Plastic Co., Ltd., PetroChina Petrochemical Research Institute, Beijing Municipal Engineering Design and Research Institute Co., Ltd., Zibo Jie Lin Plastic Pipe Co., Ltd., Cangzhou Pearl Plastic Co., Ltd., Chengdu Chuan Road Plastic Group Co., Ltd., Zhejiang Weixing New Building Materials Co., Ltd., Asia Grand Group, Wing High Co., Ltd., Hebei Quan Entech Technology Management Co., Ltd. The main drafters of this section. King of Fa Qi, Lu Xiaoying, Song Qiao, Xie Jianling, Chi Yongsheng, Jia Lirong, Li Dazhi, Li Yu, Sun Huali, Zhu Ruixia. This part of the standard replaces the previous editions are. --- GB/T 13663-1992, GB/T 13663-2000. Water supply polyethylene (PE) pipe system Part 1. General principles

1 Scope

This section GB/T 13663 specifies the terms and definitions, symbols, abbreviations, materials and health of polyethylene (PE) piping systems for water supply Health requirements. This section GB/T 13663 and other parts together, apply to the water temperature is not greater than 40 ℃, the maximum working pressure (MOP) is not greater than 2.0MPa, the general purpose of pressure water and drinking water distribution of polyethylene pipe system and its components. Note 1. Reference working temperature is 20 ℃. Operating temperature at 0 ℃ ~ 40 ℃ pressure reduction coefficient, see Appendix C. Note 2. It is the purchaser's responsibility to make the proper use of the products specified in this section, in accordance with the requirements of their particular application, in accordance with the relevant regulations, standards or codes.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 321 priority number and priority number (GB/T 321-2005, ISO 3. 1973, IDT) GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method (ISO 1183-1..2004, MOD) GB/T 1033.2-2010 Plastics - Determination of density of non-foamed plastics - Part 2. Density gradient column method (ISO 1183-2. 2004, MOD) GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2. Test conditions for molding and extrusion of plastics (ISO 527- 2..1993, IDT) GB/T 1845.2-2006 Plastics - Polyethylene (PE) molding and extrusion materials - Part 2. Preparation of test specimens and determination of properties (ISO 1872-2..1997, MOD) GB/T 3681-2011 plastic natural daylight climate aging glass filtered sunlight weathering and Fresnel mirror acceleration of solar gas Aging exposure test methods (ISO 877..1994, IDT) GB/T 3682.1 plastic thermoplastics melt mass flow rate (MFR) and melt volume flow rate (MVR) Determination Part 1. Standard methods (ISO 1133.1..2011, MOD) GB/T 6111-2003 Thermoplastics pipes for fluid transport - Internal pressure resistance test method (ISO 1167..1996, IDT) GB/T 8804.1-2003 Thermoplastic plastic pipe tensile properties - Part 1. General test methods (ISO 6259-1. 1997, IDT) GB/T 8804.3-2003 Thermoplastic plastic pipe tensile properties - Part 3. polyolefin pipe (ISO 6259-3. 1997, IDT) GB/T 9345.1-2008 Determination of plastic ash - Part 1. General method (ISO 3451-1..1997, IDT) GB/T 13021-1991 Polyethylene pipes and fittings - Determination of carbon black content (thermogravimetric method) (neqISO 6964. 1986) GB/T 17219 drinking water distribution equipment and protective materials safety evaluation criteria GB/T 18251-2000 Polyolefin pipes, fittings and mixed materials Determination of pigment and carbon black dispersion (neqISO / DIS18553..1999) GB/T 18252 plastic pipe system using extrapolation to determine the long-term hydrostatic strength of thermoplastic materials in the form of pipe ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13663.1-2017_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13663.1-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13663.1-2017_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13663.1-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13663.1-2017?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13663.1-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.