GB/T 13555-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13555-2017: Copper-clad polyimide film laminates for flexible printed circuits Status: Valid GB/T 13555: Historical versions
Basic dataStandard ID: GB/T 13555-2017 (GB/T13555-2017)Description (Translated English): Copper-clad polyimide film laminates for flexible printed circuits Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: L30 Classification of International Standard: 31.180 Word Count Estimation: 18,191 Date of Issue: 2017-12-29 Date of Implementation: 2019-01-01 Older Standard (superseded by this standard): GB/T 13555-1992 Regulation (derived from): National Standards Bulletin 2017 No. 32 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 13555-2017: Copper-clad polyimide film laminates for flexible printed circuits---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Copper-clad polyimide film laminates for flexible printed circuits ICS 31.180 L30 National Standards of People's Republic of China Replacing GB/T 13555-1992 Polyimide film copper clad laminate for flexible printed circuit 2017-12-29 Posted 2019-01-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released Directory Foreword Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 1 4 product classification, identification, structure and classification 1 4.1 Classification 1 4.2 logo 2 4.3 Structure 2 4.4 Rating 2 5 material 2 5.1 polyimide base film 2 5.2 Adhesive 3 5.3 copper foil 3 6 Requirements and test methods 4 6.1 General requirements and test methods 4 6.2 Performance requirements and test methods 5 7 inspection rules 8 7.1 Identification test 8 7.2 Quality consistency test 9 8 Packaging, marking, transportation and storage 11 8.1 Packaging 11 8.2 logo 12 8.3 Transportation 12 8.4 Storage and shelf life 12 Ordering documents 12 ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 13555-1992 "printed circuit with flexible copper clad polyimide film." This standard compared with GB/T 13555-1992, the main changes. --- The standard name changed to "flexible printed circuit with polyimide film CCL"; --- Added Chapter 3 terms and definitions; --- 4.1 product models increased from 2 models to 5 models; --- 5.2 increased the thickness of the adhesive layer and tolerance requirements, delete GB/T 13555-1992 in 4.3 copper foil and polyimide The recommended combination of films; --- 6.1.1 respectively, the copper foil surface, the basement membrane surface and the secondary surface requirements; --- 6.1.2 increased product size and tolerance requirements; --- Increased 6.2 Peel strength, dimensional stability and bending fatigue requirements; Delete GB/T 13555-1992 Table 8 After immersion solvent and simulated plating conditions Peel strength retention rate requirements; increased thermal stress (floating welding), folding resistance, resistance Pharmaceutical and water absorption requirements; increase the performance requirements of adhesive-free products; --- Chapter 8 added a roll of product joints and core tube requirements; --- Added Chapter 9 ordering documents requirements. Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents. This standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the National Standardization Technical Committee printed circuit board (SAC/TC47) centralized. This standard is drafted in. Jiujiang Folaikesi Co., Ltd. Participated in the drafting of this standard. China Electronics Standardization Institute, Michaelicon Tektronix (Changzhou) Products Services Ltd., Technology Co., Ltd., Guangdong Sheng Yi Technology Co., Ltd. The main drafters of this standard. Wang Hua Zhi, Liu Ying, Cao Yi, Gao Yanru, Zhang Panxin, Fan Heping, Yang Bei, Xiong Yun, Yang Yan, Yang Hong. This standard replaces the standards previously issued as. --- GB/T 13555-1992. Polyimide film copper clad laminate for flexible printed circuit1 ScopeThis standard specifies the flexible printed circuit with polyimide film CCL terminology, classification, requirements, inspection rules, packaging, marking, storage And transportation and so on. This standard applies to flexible printed circuit with polyimide film CCL (hereinafter referred to as flexible polyimide CCL).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. Printed circuit terminology GB/T 2036 GB/T 5230 electrolytic copper foil GB/T 13542.6 Films for electrical insulation - Part 6. Polyimide film for electrical insulation Test method for flexible copper clad laminates for printed circuit boards GB/T3 Terms and definitionsGB/T 2036 and defined by the following terms and definitions apply to this document. 3.1 Secondary surface adhesivesurface Etching or other methods to remove copper foil adhesive layer after the basement membrane surface. 3.2 Vertical machinedirection; MD In the continuous manufacture of flexible polyimide CCL lengthwise direction, consistent with the material when the continuous production direction. 3.3 Transversely transversed; TD The width direction of the flexible polyimide copper clad laminate is perpendicular to the MD direction. 4 product classification, identification, structure and grading 4.1 Classification Flexible polyimide CCL according to the application of the production process and the type of adhesive can be divided into five different models. Its model and special According to the provisions of Table 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13555-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 13555-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13555-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13555-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13555-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13555-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
