GB/T 13465.9-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13465.9-2009: Test method of the adhesion tensile strength of graphite impermeable adhesion agent Status: Valid
Basic dataStandard ID: GB/T 13465.9-2009 (GB/T13465.9-2009)Description (Translated English): Test method of the adhesion tensile strength of graphite impermeable adhesion agent Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G94 Classification of International Standard: 71.120 Word Count Estimation: 8,837 Date of Issue: 2009-04-29 Date of Implementation: 2010-01-01 Quoted Standard: GB/T 13465.1 Adopted Standard: ASTM C565-1998, NEQ Regulation (derived from): PRC National Standard Approval Announcement 2009 No.6 (Total No.146) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the detection of impervious graphite bonding adhesive used for tensile testing device, test procedures and results of calculations, specimens. This section applies to inter- impervious graphite graphite bonding adhesive tensile strength was measured. GB/T 13465.9-2009: Test method of the adhesion tensile strength of graphite impermeable adhesion agent---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test method of the adhesion tensile strength of graphite impemeable adhesion agent ICS 71.120 G94 National Standards of People's Republic of China Impervious graphite Adhesive tensile strength experiment method Posted 2009-04-29 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis section corresponds to the American Society for Testing Materials Standard ASTMC565.1998 "mechanical carbon and graphite materials tensile test method", this Portion ASTMC565.1998 is non-equivalent. This section uses a reference ASTMC565.1998 specimen shape. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Non-metallic chemical equipment Standardization Technical Committee centralized. This section is drafted. Tianhua Chemical Machinery and Automation Research and Design Institute, Shanghai Carbone Lorraine Chemical Equipment Co., Ltd., Nantong Hill sword Graphite Equipment Co., Ltd., Nantong dawn graphite heat exchanger plant, Shandong Head Co., Ltd. Liaoyang Carbon Co., Ltd., Nantong Jingtong Graphite Equipment Co., Ltd., Shenzhen City days for Graphite Products Co., Ltd. The main drafters of this section. Zhou Jie, Zhou Tianxi, Yao, Huang Jian, Li, Yao Xiaonan, Chen Hanming, Zhan province. Impervious graphite Adhesive tensile strength experiment method1 ScopeGB/T 13465 provisions of this part of the test device, specimen, test drive when it detects impervious graphite Adhesive tensile strength used Ordering and result calculation. This section applies to inter-impermeable graphite material graphite Adhesive tensile strength was measured.2 Normative referencesThe following documents contain provisions which, through reference GB/T 13465 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 13465.1 mechanical properties of impermeable graphite General Test Methods3 Terms and DefinitionsGB/T 13465.1 and established the following terms and definitions apply to this section. 3.1 Bonded graphite material graphite phenolic adhesive or other type of adhesive used graphite. 3.2 Graphite material with an adhesive bonding, in a vertical direction load is applied to the adhesive surface, the adhesive surface is exposed fracture limit load value.4 instruments and equipmentInstruments and equipment shall comply with the relevant provisions of GB/T 13465.1 of.5 Sample5.1 Sampling and sample preparation should be consistent with GB/T 13465.1 of the relevant provisions. 5.2 impervious graphite Adhesive tensile specimen size and shape as shown in FIG. Millimeters1 impermeable graphite Adhesive tensile specimen Figure......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13465.9-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 13465.9-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13465.9-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13465.9-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |