GB/T 13465.3-2014 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13465.3-2014: Test method of impermeable graphite materials: Part 3: Compressive strength
Status: Valid

GB/T 13465.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 13465.3-2014	149	Add to Cart	2 days	Test method of impermeable graphite materials: Part 3: Compressive strength	Valid
GB/T 13465.3-2002	199	Add to Cart	2 days	Test method for compressive strength of impermeable graphite materials	Obsolete
GB/T 13465.3-1992	199	Add to Cart	2 days	Test method for compressive strength of impermeable graphite materials	Obsolete

Similar standards

GB/T 7996   GB/T 23711.2   GB/T 23711.3   GB/T 13465.1   GB/T 13465.10   GB/T 13465.12   

Basic data

Standard ID: GB/T 13465.3-2014 (GB/T13465.3-2014)
Description (Translated English): Test method of impermeable graphite materials: Part 3: Compressive strength
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G94
Classification of International Standard: 71.120
Word Count Estimation: 5,530
Date of Issue: 9/3/2014
Date of Implementation: 3/1/2015
Older Standard (superseded by this standard): GB/T 13465.3-2002
Quoted Standard: GB/T 13465.1
Regulation (derived from): People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the test device for measuring the compressive strength of impermeable graphite materials when used, samples, test procedures and the results of the calculation method. This section applies to the compressive strength of impermeable

GB/T 13465.3-2014: Test method of impermeable graphite materials: Part 3: Compressive strength

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method of impermeable graphite materials. Part 3. Compressive strength ICS 71.120 G94 National Standards of People's Republic of China Replacing GB/T 13465.3-2002 Impermeable graphite materials - Test methods Part 3. Compressive strength Part 3. Compressstrength Issued on. 2014-09-03 2015-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 13465 "impervious graphite material testing method" is divided into 10 parts. --- Part 1. General Mechanical tests; --- Part 2. flexural strength; --- Part 3. Compressive strength; --- Part 4. the impact strength; --- Part 5. phenolic adhesive shrinkage; --- Part 6. Hydraulic Blasting graphite tube; --- Part 7. weight gain and fill porosity; --- Part 8. Adhesive shear strength; --- Part 9. Adhesive tensile strength; --- Part 10. tensile strength. This part of GB/T 13465 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 13465.3-2002 "impervious graphite material compressive strength test method", and GB/T 13465.3-2002 Compared to the main technical changes are as follows. --- Increased impervious graphite bulk compression sample size (Φ25mm ± 0.1mm) × (25mm ± 0.1mm) of; --- Preparation and loading speed test when the sample was revised. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Non-metallic chemical equipment Standardization Technical Committee (SAC/TC162) centralized. This section is drafted. Tianhua Institute of Chemical Machinery and Automation Ltd., Guangzhou City Special Pressure Equipment Inspection and Research Institute, Nantong planet graphite Equipment Co., Ltd., Nantong Jingtong Graphite Equipment Co., Ltd. Shanghai Branch Graphite Products Co., Ltd. Pan. The main drafters of this section. Zhou Jie, Li Maodong, Liu Xiaodong, Wang Yu Hang, the People of Chinese, Zhang Branch, Xin morning, Li-hua, Ye Weiwen. This part of the standard replaces the previous editions are. --- GB/T 13465.3-1992, GB/T 13465.3-2002. Impermeable graphite materials - Test methods Part 3. Compressive strength

1 Scope

This section GB/T 13465 specifies the test device when measuring the compressive strength of impermeable graphite material used, samples, test procedures and Results calculated. This section applies to impervious graphite material compressive strength measured.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 13465.1 impermeable graphite materials - Test methods - Part 1. General Mechanical tests

3 Terms and Definitions

GB/T 13465.1 defined and the following terms and definitions apply to this document. 3.1 Compressive strength compressivestrength It can withstand the limit load value Found on impervious graphite material per unit area.

4 instruments and equipment

Instruments and equipment shall comply with the relevant provisions of GB/T 13465.1 of.

5 Sample

5.1 Sampling, sample preparation and processing method according to GB/T 13465.1 of the relevant provisions. 5.2 Sample size. a) block material. (φ45mm ± 0.1mm) × (45mm ± 0.1mm) or (φ25mm ± 0.1mm) × (25mm ± 0.1mm); b) graphite tube. diameter, wall thickness deviation according to product specifications and regulations, a height equal to the outer diameter of the tube; c) an adhesive casting parts. (φ25mm ± 0.1mm) × (25mm ± 0.1mm). 5.3 Compression parallel to the surface of the sample bias ≤0.05mm. 5.4 specimen surface roughness Ra≤3.2μm. 5.5 each sample at least five.

6 Test procedure

6.1 material, adhesive cast member Measurement. measured along the axial direction of the sample 3, measured at each of mutually perpendicular diameters of the 1, take the resulting data 6 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13465.3-2014_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13465.3-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13465.3-2014_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13465.3-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13465.3-2014?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13465.3-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.