GB/T 13331-2014 English PDFUS$334.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 13331-2014: Earth-moving machinery -- Hydraulic excavators -- Lift capacity Status: Valid GB/T 13331: Historical versions
Basic dataStandard ID: GB/T 13331-2014 (GB/T13331-2014)Description (Translated English): Earth-moving machinery -- Hydraulic excavators -- Lift capacity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: P97 Classification of International Standard: 53.100 Word Count Estimation: 17,11 Date of Issue: 7/24/2014 Date of Implementation: 1/1/2015 Older Standard (superseded by this standard): GB/T 13331-2005 Quoted Standard: ISO 7135; ISO 9248 Adopted Standard: ISO 10567-2007, IDT Regulation (derived from): National Standards Bulletin No. 19, 2014 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the calculation of the hydraulic excavator from the weight of a unified approach and validate the calculated value of the test procedures, including hydraulic excavator hydraulic tipping machine from the weight limit and the limit GB/T 13331-2014: Earth-moving machinery -- Hydraulic excavators -- Lift capacity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Earth-moving machinery. Hydraulic excavators. Lift capacity ICS 53.100 P97 National Standards of People's Republic of China Replacing GB/T 13331-2005 Moving machinery - Hydraulic excavator from the weight (ISO 10567.2007, IDT) Issued on. 2014-07-24 2015-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 13331-2005 "moving machinery - Hydraulic excavator from the weight." This standard and GB/T 13331- Compared to 2005, in addition to editorial changes outside the main technical changes are as follows. --- Add and remove some of the normative references; --- Modify a number of terms and definitions (see 3.2, 3.3 and 311 in 2005, version 3.2 and 3.9.); --- Increasing the number of terms and definitions (see 3.11.3,3.14,3.15,3.16,3.17 and 3.18); --- Modify the part of the calculation method (see 41, 2005 version 4.1.); --- Removed some test requirements (see 2005 5.3.6); --- Modify the part of the test requirements (see 5.3.7,5.3.9 and 54, 2005 edition of the 5.4, 5.5.); --- Modifications and additions about the graphics [Figure 2, Figure 3a) and Figure 3b), 2005 edition of Figures 2 and 3]; This standard uses the translation method identical with ISO 10567.2007 "moving machinery - Hydraulic excavator from the weight" (in English). Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 6572-2014 moving machinery - Hydraulic excavators - Terminology and commercial specifications (ISO 7135.2009, IDT) --- GB/T 21153-2007 moving machinery size, performance and parameters of units and the measurement accuracy (ISO 9248.1992, MOD) The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard is drafted by. Tianjin Institute of Mechanical Engineering, Xiamen, Xiamen Engineering Machinery Company Limited. Participated in the drafting of this standard. Sany Heavy Machinery Co., Ltd. Hill redevelopment machine. The main drafters of this standard. Li Guangqing, Li Wei Ping, Zhu Chuan-bao, Zhang Yi, Wang Ke car. This standard replaces the standards previously issued as follows. --- GB/T 13331-1991, GB/T 13331-2005. Moving machinery - Hydraulic excavator from the weight1 ScopeThis standard provides a uniform method to calculate the weight of the hydraulic excavator from the calculated value and validate test procedures, including hydraulic excavators fluid Pressure from the weight limit and the machine tipping over from the weight limit and rated the determination. This standard applies to ISO 7135 definition of a hydraulic excavator.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 7135 moving machinery - Hydraulic excavators - Terminology and commercial specifications (Earth-movingmachinery-Hydraulicexca- vators-Terminologyandcommercialspecifications) Units and Measurements accuracy ISO 9248 Earth-moving machinery size, performance and parameters (Earth-movingmachinery-Units fordimensions, performanceandcapacities, andtheirmeasurementaccuracies)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Load load Applied to the lifting points of force, including the quality of attachment. 3.2 Lifting points liftpoint LP < State 1> specified by the manufacturer of the load application or location located bucket attachment bracket. See Figure 1a). NOTE. For loading bucket or attachment bracket, do not have a bucket cylinder fully extended. 3.3 Lifting points liftpoint LP < State 2> located pole mount bucket bucket pin center line. Figure 1b). 3.4 Point lifting height liftpointheight LPH From the ground reference plane (GRP) to enhance the vertical distance between points. see picture 1. 3.5 Lifting points radius liftpointradius LPR From the machine back to the vertical axis rigging ropes or horizontal distance. see picture 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13331-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 13331-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 13331-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13331-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 13331-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13331-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
