GB/T 12967.1-2020 English PDFUS$489.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 12967.1-2020: Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys - Part 1: Measurement of abrasion resistance Status: Valid GB/T 12967.1: Historical versions
Basic dataStandard ID: GB/T 12967.1-2020 (GB/T12967.1-2020)Description (Translated English): Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys - Part 1: Measurement of abrasion resistance Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H20 Classification of International Standard: 25.220.20 Word Count Estimation: 26,292 Date of Issue: 2020-06-02 Date of Implementation: 2021-04-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 12967.1-2020: Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys - Part 1: Measurement of abrasion resistance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys - Part 1.Measurement of abrasion resistance ICS 25.220.20 H20 National Standards of People's Republic of China Replace GB/T 12967.1-2008, GB/T 12967.2-2008, GB/T 12967.7-2010 Aluminum and aluminum alloy anodized film and organic polymer film Testing methods. Part 1.Determination of wear resistance 2020-06-02 release 2021-04-01 Implementation State Administration of Market Supervision and Administration Issued by the National Standardization Management Committee ForewordGB/T 12967 "Aluminum and aluminum alloy anodic oxide film and organic polymer film detection method" is divided into five parts. ---Part 1.Determination of wear resistance; ---Part 3.Copper oxide accelerated salt spray test (CASS test) of oxide film; ---Part 4.Determination of resistance to ultraviolet light of colored anodized films; ---Part 5.Deformation method to evaluate the crack resistance of anodized film; ---Part 6.Visual observation method to check the color difference and appearance quality of the colored anodized film. This part is Part 1 of GB/T 12967. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This part replaces GB/T 12967.1-2008 "Aluminum and aluminum alloy anodic oxide film detection methods Part 1.Measurement with a jet mill tester The average wear resistance of fixed anodized film", GB/T 12967.2-2008 "Aluminum and aluminum alloy anodic oxide film detection method Part 2.Use Wheel wear tester to determine the wear resistance and wear coefficient of anodized film" and GB/T 12967.7-2010 "Anodic oxidation of aluminum and aluminum alloys" Membrane testing methods. Part 7.Determination of the wear resistance of anodized films with a falling sand tester. This part takes GB/T 12967.1-2008 as Main, integrated part of GB/T 12967.2-2008 and GB/T 12967.7-2010, compared with GB/T 12967.1-2008, Apart from editorial changes, the main technical changes are as follows. --- Modify the requirements of the standard sample of the jet grinding method (see 4.5.1, 6.1 of the.2008 edition); --- Modified the requirements for the calculation of the spray grinding method (see 4.7, Chapter 7 of the.2008 edition); --- Added the requirement of resistance method to judge the end point of the test (see 4.6.3, 5.6.3); --- Increased the requirements of instruments and equipment in the jet grinding method (see 4.2.2, 4.2.3, 4.2.4, 4.2.5); --- Added sand falling method (see Chapter 5); --- Added paper belt wheel grinding method (see Chapter 6); --- Added rubber wheel grinding method (see Chapter 7); --- Added rubber friction method (see Chapter 8); --- Added friction coefficient determination method (see Chapter 9). This part is proposed by China Nonferrous Metals Industry Association. This part is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243). This section was drafted by. National Nonferrous Metal Quality Supervision and Inspection Center, Guangdong Xingfa Aluminum Co., Ltd., Guangdong Fenglu Aluminum Co., Ltd. Division, Fujian Minfa Aluminum Co., Ltd., Guangdong Jianmei Aluminum Profile Factory (Group) Co., Ltd., Wuhu Jingsu Industrial Co., Ltd., Guangdong Province Industrial Analysis and Testing Center, Shandong Huajian Aluminum Co., Ltd., Guangya Aluminum Co., Ltd., Fujian Nanping Aluminum Co., Ltd., Jiangyin East Hualu Material Technology Co., Ltd., Sichuan Samsung New Material Technology Co., Ltd., Shandongnanshan Aluminum Industry Co., Ltd., Guangdong Haomei New Material Co., Ltd., Suzhou Luopusi Gold Aluminum Co., Ltd., Guangdong Aluminum Aluminum Profile Co., Ltd., Guangdong Huachang Aluminum Factory Co., Ltd., Dong Liang Aluminum Industry Co., Ltd., Guangdong Huajiang Powder Technology Co., Ltd., Foshan Tuyi Decoration Material Technology Co., Ltd., Tianjin New Ailong Technology Co., Ltd. Limited company, Jiangyin Hengxing Coating Co., Ltd., Kunming Metallurgical Research Institute, Guangdong Weiye Aluminum Factory Group Co., Ltd. The main drafters of this section. Fan Zhigang, Chen Wensi, Jiang Chunli, Zhu Yaohui, Xu Shiguang, Xue Haodong, Li Yang, Zhang Hongliang, Hao Xuelong, Pan Xue, Liu Quanquan, Cao Jianyang, Mou Yongtao, Zang Wei, Luo Chunhua, Yan Tingzhu, Liu Chang, Tang Xingyu, Zhou Qiqi, Cai Jinshu, Wu Yanjun, Shi Hongwei, Lin Qianlong, Yue Youcheng and Liang Meichan. The previous versions of the standard replaced by this part are as follows. ---GB/T 12967.1-1991, GB/T 12967.1-2008; ---GB/T 12967.2-1991, GB/T 12967.2-2008; ---GB/T 12967.7-2010. Aluminum and aluminum alloy anodized film and organic polymer film Testing methods. Part 1.Determination of wear resistance1 ScopeThis part of GB/T 12967 stipulates the blast grinding method, the sand falling method, the paper belt wheel grinding method, the rubber wheel grinding method, the rubber friction method and the friction coefficient measurement Law. The jet grinding method is suitable for the determination of the wear resistance of anodized films and organic polymer films with a film thickness of not less than 5 μm, and is suitable for smaller samples and Samples with uneven surfaces. The falling sand method is suitable for the determination of the wear resistance of anodic oxide films and organic polymer films. It is suitable for smaller samples and uneven surfaces Sample. The paper belt wheel grinding method is suitable for the measurement of the wear resistance of anodic oxide films and organic polymer films with a thickness of not less than 5 μm, and can measure the film layer The changes in overall wear resistance and wear resistance along the thickness of the film layer are not suitable for samples with uneven surfaces. The rubber wheel grinding method is suitable for the determination of the wear resistance of the anodized film and organic polymer film, and can be used to determine the overall wear resistance of the film layer. For samples with uneven surfaces. The rubber rubbing method is suitable for the determination of the wear resistance of anodized films and anodized composite films with a thickness of less than 5 μm, functional films and textures The membrane can be used by reference. The friction coefficient measurement method is suitable for aluminum floors and aluminum foils that require anti-skid performance.2 Normative referencesThe following documents are essential for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 2481.1-1998 Detection and marking of abrasive grain size composition for consolidated abrasives Part 1.Coarse abrasive grains F4~F220 GB/T 4100-2015 ceramic tiles GB/T 4957 Non-conductive covering layer thickness measurement of non-conductive covering layer eddy current method GB/T 8005.3 Terminology for aluminum and aluminum alloys Part 3.Surface treatment GB/T 8170 Numerical Rounding Rules and Representation and Judgment of Limit Values GB/T 9258.1-2000 Abrasive particle size analysis for coated abrasives Part 1.Particle size composition GB/T 17671 Cement mortar strength inspection method (ISO method) YS/T 1186 Falling sand tester for aluminum surface anodized film and organic polymer film wear resistance test3 Terms and definitionsThe terms and definitions defined in GB/T 8005.3 and the following apply to this document. 3.1 Reference sample Samples prepared according to the conditions approved by both supply and demand. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12967.1-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 12967.1-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 12967.1-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12967.1-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 12967.1-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12967.1-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
