GB/T 12605-2008 English PDF

US$819.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12605-2008: Non-destructive testing -- Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
Status: Valid

GB/T 12605: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 12605-2008	819	Add to Cart	6 days	Non-destructive testing -- Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes	Valid
GB/T 12605-1990	719	Add to Cart	5 days	Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes	Obsolete

Similar standards

GB/T 13319   GB/T 11349.1   GB/T 12716   GB/T 12604.14   GB/T 12604.13   GB/T 12604.10   

Basic data

Standard ID: GB/T 12605-2008 (GB/T12605-2008)
Description (Translated English): Non-destructive testing -- Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J04
Classification of International Standard: 19.100
Word Count Estimation: 37,365
Date of Issue: 2008-05-13
Date of Implementation: 2008-11-01
Older Standard (superseded by this standard): GB/T 12605-1990
Quoted Standard: GB/T 9445; GB 11533-1989; GB/T 12604.2; GB 18871-2002; GB/T 19348.1-2003; GBZ 98-2002; GBZ 117-2002; GBZ 132-2002; JB/T 7902-2006
Regulation (derived from): National Standard Approval Announcement 2008 No.7 (Total No.120)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the molten metal pipes welded butt joints radiographic testing methods and quality assessment classification. This standard applies to the ring mm wall thickness of the pipe and metal pipe butt joints. Butt weld pipe fittings, pipe can also refer to the use of welded joints. This standard does not apply to friction welding, flash welding and other mechanical methods butt joint welding.

GB/T 12605-2008: Non-destructive testing -- Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-destructive testing. Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes ICS 19.100 J04 National Standards of People's Republic of China Replacing GB/T 12605-1990 Non-destructive testing of metal pipes to melt solder ring Butt joints radiographic detection method Posted 2008-05-13 2008-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 persons 2-ray detector 5 Radiation Protection 2 6 transillumination process 2 7 backsheet quality and observed for 12 Quality rating 8 13 9 film preservation and inspection report 19 Appendix A (informative) Calculation method of source maximum size of 20 Appendix B (normative) monofilament IQI 22 Annex C (normative) special contrast block 24 Annex D (informative) pipeline circumferential butt joints transillumination method for determining the number of 26 Annex E (informative) small diameter tube oval transillumination imaging detection of a range of approximate calculation method 31

Foreword

This standard replaces GB/T 12605-1990 "steel pipe girth fusion welded butt joints of radiographic inspection and quality classification." This standard and GB/T 12605-1990 compared to the main changes are as follows. --- Technical level of radiographic indicators were delineated, increase the selection of radiography grade requirements under different circumstances; --- Increased industrial radiographic film classification system content, the film is divided into T1, T2, T3, T4 four categories; --- Increased provisions 75Se-ray source applications; --- Increase the range of suitable materials, steel pipe girth metal pipes to the hoop; --- Steel, copper and copper alloys, aluminum and aluminum alloys, titanium and titanium alloys of different thicknesses highest tube voltage diagram has been modified; --- Increased nickel and nickel alloys, copper and copper alloy pressure equipment butt joints ray detection quality grading content; --- Appendix B monofilament IQI IQI added to the requirements of different materials; --- Added Appendix D pipeline circumferential butt joints transillumination method for determining the number of times; --- Increased transillumination first approximation calculation method of the imaging range detection Appendix E trails tube oval. The Standard Appendix B, Appendix C are normative appendices, Appendix A, Appendix D, Appendix E is an information appendix. The standard proposed by China Machinery Industry Federation. The standard non-destructive testing by the National Standardization Technical Committee (SAC/TC56) centralized. This standard was drafted. State Grid Electric Power Research Institute, Beijing Building, Tianjin Electric Power Construction Company, Zhejiang Thermal Power Construction Company, Yunnan Electric Power Test Institute test (Group) Co., Ltd. Electric Power Research Institute, Shandong Electric Power Research Institute, Haimen Lianying Chang testing equipment. The main drafters of this standard. EVAL celebrate, solemn, Zhang Xuefeng, Wu Qin Zhang, Xiao Shirong, Zheng Shi Cai, Wu Yingli, He Zhengbing. This standard replaces the standards previously issued as follows. --- GB/T 12605-1990. Non-destructive testing of metal pipes to melt solder ring Butt joints radiographic detection method

1 Scope

This standard specifies the molten metal pipes welded circumferential butt joints radiographic testing methods and quality assessment classification. This standard applies to wall thickness (2 ~ 175) Ring mm metal tubes and pipes to the butt joint. Welded pipe fittings (tees, bends Head), pipe (longitudinal seam spiral seam) can also refer to the use of welded joints. This standard does not apply to friction welding, flash welding and other mechanical methods welding of butt joints.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 9445 NDT personnel qualification and certification (GB/T 9445-2008, ISO 9712.2005, IDT) GB 11533-1989 standard vision chart GB/T 12604.2 Terminology for nondestructive testing radiographic testing (GB/T 12604.2-2005, ISO 5576.1997, IDT) GB 18871-2002 ionizing radiation protection and safety of radiation sources basic standards (neq IAEA Safety Series) GB/T 19348.1-2003 destructive testing - Industrial radiographic film - Part 1. Classification of film systems for industrial radiography (ISO 11699-1.1998, IDT) GB Z98-2002 Radiation Workers' Health Standards GB Z117-2002 industrial X-ray inspection health protection standards GB Z132-2002 industrial γ-ray detection protection standards JB/T 7902-2006 NDT radiographic testing linear IQI

3 Terms and Definitions

GB/T 12604.2 and established the following terms and definitions apply to this standard. 3.1 Public means nominal wall thickness of the base material. Without considering manufacturing variations. 3.2 The nominal thickness calculated based on the thickness of the radiation (transillumination) direction of the material. 3.3 Ray radiation source on the direction of the workpiece from the side of the subject to the film surface. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12605-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12605-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12605-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12605-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12605-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12605-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.