GB/T 1209.1-2009 English PDFUS$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 1209.1-2009: Agricultural machinery -- Cutter bars -- Part 1: Assembly Status: Valid GB/T 1209.1: Historical versions
Basic dataStandard ID: GB/T 1209.1-2009 (GB/T1209.1-2009)Description (Translated English): Agricultural machinery -- Cutter bars -- Part 1: Assembly Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.50 Word Count Estimation: 14,170 Date of Issue: 2009-11-30 Date of Implementation: 2010-04-01 Older Standard (superseded by this standard): GB/T 1209-2002 Quoted Standard: GB/T 10-1988; GB/T 12-1988; GB/T 41-2000; GB/T 93-1987; GB/T 95-2002; GB/T 710-2008; GB/T 867-1986; GB/T 869-1986; GB/T 870-1986; GB/T 1209.2-2009; GB/T 1209.3-2009; GB/T 1209.4-2009; GB/T 1209.5-2009; GB/T 2828.1-2003; GB/T 5783-2000; GB/T 6170-2000 Regulation (derived from): National Standard Approval Announcement 2009 No.14 (Total No.154) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the types of agricultural machinery cutters and basic dimensions, technical requirements, inspection rules and signs, packaging, transport and storage. This section applies to agricultural machinery cutting assembly. GB/T 1209.1-2009: Agricultural machinery -- Cutter bars -- Part 1: Assembly---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Agricultural machinery Cutter bars Part 1. Assembly ICS 65.060.50 B91 National Standards of People's Republic of China Replacing GB/T 1209-2002 Agricultural machinery cutters - Part 1. Assembly Posted 2009-11-30 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 1209 "Agricultural Machinery cutter" is divided into. --- Part 1. assembly; --- Part 2. blade protection device; --- Part 3. moving blade, stationary blade and arbor; --- Part 4. Pressure edge device; --- Part 5. friction plate. This section GB/T 1209 Part 1. This part is GB/T 1209-2002 "agricultural machinery cutter" amendments. This section compared with GB/T 1209-2002, the main To technical content changes as follows. --- Improve the technical parameters of type Ⅱ cutting; --- Adjusted Ⅵ type cutter technical parameters; --- Adjust the type Ⅴ, Ⅵ type cutter special gasket material processing requirements; --- Increased Ⅶ type cutter. Since the implementation of this section instead of GB/T 1209-2002. Appendix A of this part is a normative appendix. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee on Agriculture machinery centralized. This section is drafted. LOVOL International Heavy Industry Co., Ltd., John Deere Harvester Co. kai, China Agriculture Mechanization Institute of Science, the machine South Machinery Co., Ltd. The main drafters of this section. Zhu Jinguang, Yue Qin, Bo Yuxia, Sun Ling, Zhou Chunlin, Li Zhiqing, Yeung Kam chapter. This part of the standard replaces the previous editions are. --- GB 1209-1975, GB/T 1209-1986, GB/T 1209-2002. Agricultural machinery cutters - Part 1. Assembly1 ScopeThis section GB/T 1209 regulations agricultural machinery cutter (hereinafter referred to as a cutter) the types and basic dimensions, technical requirements, inspection Inspection rules and signs, packaging, transportation and storage. This section applies to agricultural machinery cutting assembly.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 1209 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 10-1988 countersunk square neck bolts GB/T 12-1988 Cup Head Square Neck Bolts GB/T 41-2000 hex nuts Class C (eqvISO 4034.1999) GB/T 93-1987 standard spring washers GB/T 95-2002 flat washers C grade (eqvISO 7091.2000) GB/T 710-2008 quality carbon structural steel sheets and strips GB/T 867-1986 Round head rivets GB/T 869-1986 countersunk head rivet GB/T 870-1986 countersunk head rivets GB/T 1209.2-2009 agricultural machinery Cutter Part 2. blade protection device GB/T 1209.3-2009 cutter Agricultural machinery - Part 3. Dynamic blade, fixed blade and arbor GB/T 1209.4-2009 agricultural machinery Cutter Part 4. Pressure blade device GB/T 1209.5-2009 cutter Agricultural machinery - Part 5. lining GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Program (ISO 2859-1.1999, IDT) GB/T 5783-2000 full thread hex head bolts GB/T 6170-20001 type hexagon nuts3 Types and basic dimensions3.1 cutter into seven types. Ⅰ type --- suitable for lawn mowers; Ⅱ type --- suitable for grain harvesting machinery; Ⅲ type --- suitable for grain harvesting machinery; Ⅳ type --- suitable for grain harvesting machinery; Ⅴ type --- for small harvesting machinery; Ⅵ type --- mainly applied to semi-feeding combine harvester; Ⅶ type --- suitable for grain harvesting machinery. 3.2 cutter basic types and dimensions shall comply with Figs. 1 to 7 and Tables 1 to 7. ...... |
