GB/T 11885-2015 English PDFUS$469.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11885-2015: Automatic rail-weighbridges Status: Valid GB/T 11885: Historical versions
Basic dataStandard ID: GB/T 11885-2015 (GB/T11885-2015)Description (Translated English): Automatic rail-weighbridges Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N13 Classification of International Standard: 17.100 Word Count Estimation: 22,211 Date of Issue: 2015-09-11 Date of Implementation: 2016-04-01 Older Standard (superseded by this standard): GB/T 11885-1999 Quoted Standard: GB/T 191; GB/T 2423.1-2008; GB/T 2423.2-2008; GB/T 2423.3-2006; GB/T 2424.1-2005; GB/T 2424.2-2005; GB/T 2887-2011; GB/T 2970; GB/T 3323; GB/T 5677; GB/T 7233.1; GB/T 7233.2; GB/T 7551; GB/T 7724; GB/T 8170; GB/T 8923.1-2011; GB/T 11345; GB/T 13384; GB 14249.1; GB/T 14250; GB/T 14253-2008; GB/T 15395; GB/T 17626.1-2006; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 17626.4- 2008; GB/T 17626.5-2008; GB/T 17626.6-2008; GB/T 17626.11-2008; GB/Z 18039.5-2008; GB/T 26389; QB/T 1588.1; QB/T 1588.2; QB/T 1588.3; QB/T 1588.4; JB/T 6061; JJG 567 Adopted Standard: OIML R106-1-2011, MOD Regulation (derived from): National Standard Announcement 2015 No.25 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies automatic weighbridge (hereinafter referred to as "track scale") terms and definitions, measurement requirements, technical requirements, test and inspection methods, inspection rules and signs, packaging, transportation and storage. This standard applies to standard gauge, to determine the quality of railway wagons by rail scale dynamic weighing mode (including axle weighing, truck weighing and vehicle weighing). Other gauge, weighing range and accuracy class rail scale may refer to the use of this standard; continuously tracks automatically track scale, rail track pad sensor automatic sensor automatically scale and rail track scale may also refer to the use of this standard. GB/T 11885-2015: Automatic rail-weighbridges---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Automatic rail-weighbridges ICS 17.100 N13 National Standards of People's Republic of China Replacing GB/T 11885-1999 Automatic Railway Track Scale Metrologicalandtechnicalrequirement-Test, MOD) Issued on. 2015-09-11 2016-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 2 4 5 measurement requirements 4.1 Unit of Measure 5 4.2 Weighing range 5 4.3 accuracy class 5 4.4 verification scale interval (e) 5 4.5 The maximum permissible error 6 4.6 influence quantity 7 7 4.7 Long-term stability 5 Technical requirements 7 Composition 5.1 Track Scale 7 5.2 Applicability of 7 5.3 Security 7 Fraudulent use 8 5.4 5.5 Unexpected disorders 8 5.6 misuse 8 5.7 carriages 8 5.8 Transition 8 5.9 Limit 8 Load cell 8 5.10 Weighing 8 5.11 5.12 zero-setting device 8 Warm-up time 9 5.13 Interface 9 5.14 5.15 indicates weighing results 9 5.16 Cumulative 9 Vehicle identification device 9 5.17 5.18 materials, processing and assembly requirements 9 Installation 10 5.19 5.20 scales Room 11 Software 5.21 11 5.22 protective measures 12 6 12 Test and inspection methods 6.1 Test Standard 12 12 6.2 Appearance 12 6.3 Security 6.4 carrier 13 6.5 Transition 13 6.6 Restrictor 13 6.7 Load cell 13 Weighing 6.8 13 6.9 Zero 13 13 6.10 Unbalanced Load Discrimination 13 6.11 6.12 Repeatability 13 6.13 base 13 6.14 Line 13 By train test 13 6.15 Dynamic Weighing test 13 6.16 6.17 influence factor and disturbance tests 14 14 6.18 Long-term stability test 7 Inspection rules 14 7.1 Type tests 14 7.2 factory inspection 16 16 7.3 Installation and performance test 8 signs, packaging, transportation and storage 17 8.1 Marking 17 8.2 Packaging 17 8.3 Transport 18 8.4 Storage 18ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 11885-1999 "Automatic Railway Track Scale." This standard compared with GB/T 11885-1999, the main technical changes are as follows. --- The maximum permissible error measurement requirements change (see 4.5); --- Refine the weighbridge installation requirements (see 5.19); --- Increasing the specific requirements of the line and the scale housing (see 5.19.3 and 5.20); --- Increasing the weighbridge software technical requirements (see 5.21); --- An increase of some test requirements (see 6.2 6.6,6.10 ~ ~ 6.14,6.18); --- Of test items have been classified (see 7.2); --- Increased testing methods installed (see 7.3). This standard uses redrafted Law Amendment uses OIMLR106-1.2011 "Automatic Railway Track Scale" international recommendations. This standard R106-1.2011 technical differences and their reasons are as follows. --- Increased 5.19.3 "line" and 5.19.4 "transition" on the specific requirements, improve the measurement performance track scale; --- An increase of 5.20 "weighing room" at the request of track scale operation and maintenance more convenient; --- 6.16 "Dynamic Weighing test" prepared in accordance with Test Method of testing wagons prepared to adapt our test methods; --- An increase of 6.18 "long-term stability" to improve the performance measurement track scale; --- 7.1 "type test" in the preparation of type approval and in accordance with the requirements of type evaluation, adaptation of the relevant provisions of China; --- Remove R106-1. B "axis weighing track scale level correction utility" 2011 Appendix NA of railroad track scale technology development; --- Increased in Chapter 2, normative references. This standard made the following editorial changes. --- Use the "standard" instead of "the present international recommendations." Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee instrument (SAC/TC97) centralized. This standard was drafted. Maple Scale Co., Ltd. Changsha, the state railway scale metering station, Admiralty Jinan electronic weighing Co., National Track Scale Metering Station sub-station Shanghai, Beijing, the new cross-technology development company, the national railway scale metering station sub-station in Lanzhou, Beijing Haidian Road New technology through joint development of the railway company. The main drafters of this standard. a high-Ning, Li Shilin, Hu Changming, Zhou Shenghua, Luo Jianmin, ginger will increase, Geng Jie, Zhang Daqing. This standard replaces the standards previously issued as follows. --- GB/T 11885-1989, GB/T 11885-1999. Automatic Railway Track Scale1 ScopeThis standard specifies automatic weighbridge (hereinafter referred to as "track scale") terms and definitions, measurement requirements, technical requirements, testing and inspection party Method, inspection rules and signs, packaging, transportation and storage. This standard applies to standard gauge, to determine the quality of railway wagons by rail scale dynamic weighing mode (including axle weighing, truck weighing And vehicle weighing). Other gauge, weighing range and accuracy class rail scale may refer to the use of this standard; continuously tracks automatically track scale, rail pad Automatic sensor automatic sensor rail track scale and weighbridge may also refer to the use of this standard.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD) GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2- 1.2007, IDT) GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2- 2.2007, IDT) GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT) GB/T 2424.1-2005 Environmental testing for electric and electronic products of high temperature and low temperature tests (IEC 60068-3-1. 1974, IDT) GB/T 2424.2-2005 Environmental testing for electric and electronic products for damp heat tests (IEC 60068-3-4.2001, IDT) GB/T 2887-2011 General specification for computer sites GB/T 2970 steel plate ultrasonic inspection GB/T 3323 metal fusion welded joints radiography (GB/T 3323-2005, EN1435.1997, MOD) GB/T 5677 Steel Castings radiographic testing (GB/T 5677-2007, ISO 4993. 1987, IDT) GB/T 7233.1 steel castings Ultrasonic examination - Part 1. General Purpose Steel Castings (GB/T 7233.1-2009, ISO 4992- 1.2006, MOD) GB/T 7233.2 steel castings Ultrasonic examination - Part 2. High pressure cast steel (GB/T 7233.2-2010, ISO 4992-2. 2006, MOD) GB/T 7551 load cell (GB/T 7551-2008, OIMLR60.2000, MOD) GB/T 7724 Electronic weighing instruments GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 8923.1-2011 steel substrates before application of paints and Visual assessment of surface cleanliness - Part 1. uncoated Steel surface and the overall removal Rust grades and grade of the original steel surface after coating (ISO 8501-1.2007, IDT) GB/T 11345 welds NDT ultrasonic testing, testing levels and assessment (GB/T 11345-2013, ISO 17640.2010, MOD) GB/T 13384 mechanical and electrical products packaging General technical conditions GB 14249.1 electronic weighing security requirements ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11885-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 11885-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11885-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11885-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11885-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11885-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
