GB/T 11828.2-2022 English PDFUS$289.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11828.2-2022: Instruments for stage measurement - Part 2: Pressure-type stage gauge Status: Valid GB/T 11828.2: Historical versions
Basic dataStandard ID: GB/T 11828.2-2022 (GB/T11828.2-2022)Description (Translated English): Instruments for stage measurement - Part 2: Pressure-type stage gauge Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N93 Word Count Estimation: 14,142 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 11828.2-2022: Instruments for stage measurement - Part 2: Pressure-type stage gauge---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Instruments for stage measurement -- Part 2.Pressure-type stage gauge ICS 07.060 CCSN93 National Standards of People's Republic of China Replacing GB/T 11828.2-2005 Water level measuring instruments - Part 2.Pressure water level gauges Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Product classification and composition 2 4.1 Category 2 4.2 Composition 2 5 Technical requirements 2 5.1 Appearance 2 5.2 Working Environment 2 5.3 Range 2 5.4 Resolution 2 5.5 Accuracy 2 5.6 Repeatability 3 5.7 Stability 3 5.8 Timing Error 3 5.9 Power 3 5.10 Power consumption 3 5.11 Insulation resistance 3 5.12 Anti-interference 3 5.13 Lightning protection 3 5.14 Signals and Interfaces 4 5.15 Data transfer 4 5.16 Data record 4 5.17 Overall structure 4 5.18 Water tightness 4 5.19 Mechanical environment adaptability 4 5.20 Reliability 4 6 Test method 4 6.1 Test requirements 4 6.2 Main test equipment 5 6.3 Test method content 5 7 Inspection Rules 7 7.1 Factory inspection 7 7.2 Type inspection 7 8 Logos and Instructions for Use 8 8.1 Flags 8 8.2 Instruction Manual 8 9 Packaging, Transportation, Storage 8 9.1 Packaging 8 9.2 Transport 8 9.3 Storage 9 10 Installation 9 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 2 of GB/T 11828 "Water Level Measuring Instruments". GB/T 11828 has released the following parts. --- Part 1.Float-type water level gauge; --- Part 2.Pressure water level gauge; --- Part 3.Acoustic water level gauge; --- Part 4.Electronic water gauge. This document replaces GB/T 11828.2-2005 "Water Level Measuring Instruments - Part 2.Pressure Water Level Gauge", and GB/T 11828.2- Compared with.2005, except for editorial changes, the main technical content changes are as follows. a) Added the definitions of terms "submersible pressure water level gauge", "time drift" and "temperature drift" (see 3.1.1, 3.2, 3.3,.2005 edition Chapter 3); b) Changed the product classification of pressure water level gauges (see 4.1, 4.1 of the.2005 edition), and deleted the "pressure water level gauge product model" naming" (see 4.2 of the.2005 edition); c) Added the category of ranges (see 5.3, 5.1.1 of the.2005 edition); d) The category of resolution is deleted (see 5.4, 5.1.2 of the.2005 edition); e) Changed the index and representation of the accuracy level (see 5.5, 5.2.1 of the.2005 edition); f) Deleted the technical indicators of hysteresis (see 5.2.2 of the.2005 edition); g) Changed the technical indicators of repeatability (see 5.6, 5.2.3 of the.2005 edition); h) Deleted the technical indicators of reproducibility (see 5.2.4 of the.2005 edition); i) Changed the technical indicators and representation of time drift (see 5.7.1, 5.2.5 of the.2005 edition); j) Changed the technical specifications of temperature drift (see 5.7.2, 5.2.6 of the.2005 edition); k) Added the content of data transmission (see 5.15); l) Changed the provisions of data recording (see 5.16, 5.1.6, 5.1.7 of the.2005 edition); m) The provisions on anti-interference and lightning protection are added (see 5.12 and 5.13); n) Deleted the content of field comparison test (see 5.5.1 of the.2005 edition); o) Added installation requirements (see Chapter 10). Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the Ministry of Water Resources of the People's Republic of China. This document is drafted by. Quality Supervision, Inspection and Testing Center for Hydrological Instruments and Geotechnical Engineering Instruments of the Ministry of Water Resources, Nanjing Water Conservancy and Hydrology Autonomous Region of the Ministry of Water Resources Institute of Automation, Jiangsu Nanshui Technology Co., Ltd., Shandong Haorun Automation Technology Co., Ltd. The main drafters of this document. Shi Zhanhong, Gao Jun, Li Niegui, Zong Jun, Zhou Chuanchen, Li Jiaqun, Guo Zifeng. The previous versions of this document and its superseded documents are as follows. ---First published in.2005 as GB/T 11828.2-2005; ---This is the first revision.IntroductionWater level is the basic element of hydrological monitoring and an important basis for the construction of water conservancy projects, flood control and drought relief, and water resources management. now The high-quality development of modern water conservancy puts forward higher requirements for the automation, intelligence and accuracy of water level measuring instruments. Standardization of instruments is the basic work to promote the development, production, inspection and use of water level measuring instruments. GB/T 11828 "Water Level Measuring Instrument" is intended to be composed of four parts according to the working principle of the instrument. --- Part 1.Float-type water level gauge. The purpose is to specify the technical requirements, inspection rules and methods for float-type water level gauge products. --- Part 2.Pressure water level gauge. The purpose is to specify the technical requirements, inspection rules and methods for pressure water level gauge products. --- Part 3.Acoustic water level gauge. The purpose is to specify technical requirements, inspection rules and methods for acoustic water level gauge products. --- Part 4.Electronic water gauge. The purpose is to specify the technical requirements, inspection rules and methods of electronic water gauge products. This document is Part 2 of GB/T 11828. Water level measuring instruments - Part 2.Pressure water level gauges1 ScopeThis document specifies the product classification, composition, technical requirements, test methods, inspection rules, signs and instructions for use of pressure water level gauges. Packaging, transportation, storage and installation. This document applies to the production, inspection and use of pressure-type water level gauges for measuring surface water and groundwater levels.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 4208 enclosure protection class (IP code) GB/T 9359 Basic environmental test conditions and methods for hydrological instruments GB/T 9969 General Principles of Instruction Manual for Industrial Products GB/T 13384 General technical conditions for packaging of mechanical and electrical products GB/T 17626.5-2019 Electromagnetic Compatibility Test and Measurement Technology Surge (Shock) Immunity Test GB/T 17626.8-2006 Electromagnetic Compatibility Test and Measurement Technology Power Frequency Magnetic Field Immunity Test GB/T 18185 Technical Requirements for Reliability of Hydrological Instruments GB/T 50095 Standard for basic hydrological terms and symbols SL180 Telemetry terminal for automatic hydrological monitoring and reporting system equipment3 Terms and DefinitionsThe terms and definitions defined in GB/T 50095 and the following apply to this document. 3.1 pressure-type stage gauge An instrument that uses a pressure sensor to directly or indirectly sense the hydrostatic pressure of a water body and convert it into a water level. 3.1.1 Submersiblepressure-typestagegauge The pressure sensor is placed at the underwater measuring point to directly sense the hydrostatic pressure and convert it into an instrument of water level. 3.1.2 bubble-typestagegauge The hydrostatic pressure of the underwater measuring point is converted into gas pressure by the blowing pressure device, and the pressure is led above the water surface. An instrument that induces gas pressure in a device and converts it into a water level. 3.2 time drift timedrift Under reference working conditions, when the measured and environmental conditions are kept constant, the change in the output of the instrument within a specified time. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11828.2-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 11828.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11828.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11828.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11828.2-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11828.2-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
