GB/T 11371-2008 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11371-2008: Operation and maintenance for gas turbine Status: Valid GB/T 11371: Historical versions
Basic dataStandard ID: GB/T 11371-2008 (GB/T11371-2008)Description (Translated English): Operation and maintenance for gas turbine Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K58 Classification of International Standard: 27.040 Word Count Estimation: 7,785 Date of Issue: 2008-04-09 Date of Implementation: 2008-10-01 Older Standard (superseded by this standard): GB/T 11371-1989 Quoted Standard: GB/T 10489; GB/T 13674; GB/T 15135 Regulation (derived from): Announcement of Newly Approved National Standards No. 5, 2008 (No. 118 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the use of light-duty gas turbines and maintenance requirements. This standard applies to power generation and mechanical drive gas turbine power plant, gas turbine used for the preparation and maintenance of documentation to provide evidence. GB/T 11371-2008: Operation and maintenance for gas turbine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Operation and maintenance for gas turbine ICS 27.040 K58 National Standards of People's Republic of China Replacing GB/T 11371-1989 Light gas turbine operation and maintenance Posted 2008-04-09 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 11371-1989 "lightweight gas turbine operation and maintenance." This standard compared with GB/T 11371-1989 main changes are as follows. --- Increasing the GB/T 13674 "light gas turbine fuel specification" and GB/T 15135 "gas turbine word" normative cited File (the first edition chapter 2); --- Increased use of protective measures and maintenance personnel to work under abnormal noise level of the environment (edition 4.10); --- Increase of anti-explosion requirements (edition 4.12); --- Modify some running check the contents (1989 edition 5.1.6,5.1.15); --- Increase manually jigger requirements (Excerpts 5.1.12); --- Increase fault emergency stop inspection requirements (Excerpts 5.2.3.7). The standard proposed by China Aviation Industry Corporation. The standard by the China Aviation Industry Corporation. This standard was drafted. Aviation of China Institute of Technology, New World Aviation Gas Turbine Co., Ltd. The main drafters of this standard. Xu Shuangcheng, Zhang, in Pei Min, Meng Tao. This standard replaces the standards previously issued as follows. --- GB/T 11371-1989. Light gas turbine operation and maintenance1 ScopeThis standard specifies the light gas turbine (hereinafter referred to as gas turbines) use and maintenance requirements. This standard applies to gas turbine power generation and mechanical drive equipment used for the preparation and maintenance of gas turbines provide the basis for the use of the document.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 10489 General requirements for light turbine GB/T 13674 light gas turbine fuel specification GB/T 15135 GT vocabulary3 Terms and DefinitionsTerms and definitions GB/T 10489 and GB/T 15135 in established apply to this standard.4 Safety4.1 Use and maintenance of the gas turbine should be consistent with the relevant provisions of national technical standards for safety, and to engage in the use and maintenance of the equipment should mention For adequate security and protection. Gas turbine producing 4.2 provides maintenance manual should include the safe use and maintenance requirements. 4.3 GT runtime user who enters the gas turbine operating site (room, engine room, etc.) should be made to safety regulations. 4.4 pairs use and maintenance personnel should be trained in safe handling techniques. 4.5 Before the gas turbine power plant put into operation, use and maintenance personnel should be a clear division of duties. 4.6 in the work area, there should be adequate lighting and ventilation equipment. 4.7 pairs dangerous parts should be clearly marked and the use of shields, partitions and parapets and other protective equipment to protect the safety of personnel. 4.8 In the gas turbine power plant operation, the response to provide adequate ventilation and evacuation site facilities personnel access device. In addition, It should be considered likely to endanger the safety of persons using fire extinguishing system in an enclosed area. 4.9 should provide proper equipment and tools for the use and maintenance staff, with particular attention to heavy equipment (including rigging, spreader, crane Mechanical and driving, etc.) use of security measures. 4.10 Use and maintenance personnel should work under abnormal noise level environment wear ear protection. 4.11 workplace should prevent the risk of fire, full attention to fuel, oil leakage may cause a risk of fire (should pay particular attention to potential Leakage), and take appropriate fire safety measures. 4.12 should provide adequate gas detection, spark suppression equipment, pipe measure grounding/bonding, so that the possibility of fuel leaks and gas explosions Minimized. The gas turbine power plant 4.13 electrical equipment shall meet the security requirements specified in the relevant standards and regulations for electrical equipment. 4.14 communication tools for contact should be intact, able to adapt to the unified command and emergency use. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11371-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 11371-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11371-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11371-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11371-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11371-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
