GB/T 11259-2015 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11259-2015: Non-destructive testing -- Practice for fabrication and control of steel reference blocks used in ultrasonic testing Status: Valid GB/T 11259: Historical versions
Basic dataStandard ID: GB/T 11259-2015 (GB/T11259-2015)Description (Translated English): Non-destructive testing -- Practice for fabrication and control of steel reference blocks used in ultrasonic testing Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 19.100 Word Count Estimation: 13,191 Date of Issue: 2015-10-09 Date of Implementation: 2016-06-01 Older Standard (superseded by this standard): GB/T 11259-2008 Quoted Standard: GB/T 12604.1; GB/T 20737 Regulation (derived from): National Standard Announcement 2015 No.31 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the production and control procedures ultrasonic testing of steel reference blocks, test blocks with flat sound wave, the shape of a cylinder, containing flat-bottom holes (FBH), ultrasound can be used for performance testing instruments and probes, as well as alloy products ultrasonic testing and calibration control. The reference blocks both for direct contact with the liquid immersion method is also applicable to the pulse-echo method. Although this standard is basically discusses the production and testing of carbon steel and alloy steel test block, and the detection of these materials, but its production and testing method is also applicable to other materials, such as nickel-based alloys, such as certain aluminum test block preparation. When making reference block material other than carbon steel and alloy steel, it may require some additional procedures and tests. In certain applications, this standard does not rule out some specifications and additional supplements deemed necessary requirements. Other shapes steel production parameters and test control block, may refer to this standard use. And testing of these materials, but its production and test methods for preparing test block other material, such as nickel-based alloys, aluminum and other some also apply to. When making reference block material other than carbon steel and alloy steel, it may require some additional procedures and tests. In certain applications, this standard does not rule out some specifications and additional supplements deemed necessary requirements. Other shapes steel production parameters and test control block, may refer to this standard use. GB/T 11259-2015: Non-destructive testing -- Practice for fabrication and control of steel reference blocks used in ultrasonic testing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. (Non-destructive method for the production and control of steel reference blocks ultrasound testing) ICS 19.100 J04 National Standards of People's Republic of China Replacing GB/T 11259-2008 NDT Ultrasonic testing of steel reference blocks Production and control methods Issued on. 2015-10-09 2016-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions Overview 4 1 5 Material Selection 1 6 Production Process 2 7 physical properties test 5 8 ultrasonic response test 5 9 specimen identification and surface state 7 Sealing 10 7 Appendix A (normative) artificial defect cover-die making process 8 Dimensions and tolerances 1 ultrasound reference block 3 Figure 2 6.4mm diameter flat bottom hole covered die shadow 5 Figure 3 typical reference block area - amplitude curve 6 Figure 4 reference block typical distance - amplitude response curve 6 Mixture Figure A.1 flat bottom hole injection 8 Figure A.2 curing flat bottom hole 9 Figure A.3 artificial defect extraction flat bottom hole 9 Figure A.4 artificial defect image measuring 10 flat-bottomed hole Table 1 standard test block size and the recommended test block group 4ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 11259-2008 "NDT ultrasonic testing of steel production parameters and test methods test block." This standard 11259-2008 major changes compared to GB/T as follows. --- Modify the standard name; --- Modify the scope (see Chapter 1; Chapter 1 of the 2008 edition); --- Modify the production process (see Chapter 6; Chapter 6 of the 2008 edition); --- Modify the physical characteristics of the test (see Chapter 7; Chapter 7 of the 2008 edition); --- Identify and modify the test piece surface condition (see Chapter 9; Chapter 9 of the 2008 edition); --- Increased normative appendix "artificial defect cover-die production process" (see Appendix A). The standard non-destructive testing by the National Standardization Technical Committee (SAC/TC56) and focal points. This standard was drafted. Nanjing Di Weier high-end manufacturing Co., Ltd., Shandong Ruixiang Mould Co., Ltd. (Shandong Jining mold factory), Haitai Division Inspection Technologies Co., Shanghai Research Institute of Materials, Guangdong Special Equipment Inspection and Research Institute. The main drafters of this standard. Vincent Chan, Zhang Li, Weizhong Rui, Ma Jianmin, Zhang YIMING, Jinyu Fei, LI Xu Feng. This standard replaces the standards previously issued as follows. --- GB/T 11259-1989, GB/T 11259-1999, GB/T 11259-2008. NDT Ultrasonic testing of steel reference blocks Production and control methods1 ScopeThis standard specifies the reference ultrasonic testing of steel production and control procedures for the examination block, a flat-screen sound wave test block, a cylinder shape, Contained within the flat bottom hole (FBH), ultrasound can be used for performance testing instruments and probes, as well as calibration and control alloy products ultrasonic testing. The Said reference blocks both for direct contact method is also applicable to the liquid immersion pulse-echo method. Although this standard is basically discusses the production and testing of carbon steel and alloy steel test block, and the detection of these materials, but its production and inspection Test specimen preparation method is also applicable to other materials, such as nickel-based alloys, such as aluminum in some. When produced in addition to carbon and alloy material The reference test block, may need some additional procedures and tests. In certain applications, this standard does not necessarily rule out some normative and think To some additional additional requirements. Other shapes steel production parameters and test control block, may refer to this standard use.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12604.1 Terminology for nondestructive testing Ultrasonic testing GB/T 20737 Non-destructive testing - General terms and definitions3 Terms and DefinitionsTerms and definitions GB/T 12604.1 and GB/T 20737 apply to this document defined.4 OverviewThis standard is described in detail with the subject material commensurate carbon and alloy steel reference blocks of basic production and control procedures, and clearly should meet Minimum requirements. When making use of the standard reference test block other types of materials or larger diameter, you may need to add additional requirements. Physical properties of the hole can be confirmed by evaluating the plastic replicas. It should be appreciated that the use of replicas to evaluate pore size limitations.5 Material Selection5.1 is used as reference block material should be seized materials have similar acoustic attenuation properties. Match acoustic response should consider the following variables. Crystal Size, heat treatment, physical and chemical composition, surface roughness and manufacturing processes (rolling, forging, etc.). 5.2 Overall assessment procedure that should be introduced into the longitudinal beam pulse echo test block on either side of the beam axis is determined using a metallic sound away. Use clean water as a coupling agent in the liquid immersion method or by using a suitable coupling agent (oil, glycerine, etc.) are available for direct contact. Making reference blocks Evaluation of the raw materials testing equipment, frequency and the probe should be used for detection of the product material fairly. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11259-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 11259-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11259-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11259-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11259-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11259-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
