GB/T 11159-2010 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11159-2010: Specifications for low air pressure test chambers Status: Valid GB/T 11159: Historical versions
Basic dataStandard ID: GB/T 11159-2010 (GB/T11159-2010)Description (Translated English): Specifications for low air pressure test chambers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N61 Classification of International Standard: 19.040 Word Count Estimation: 9,979 Date of Issue: 2010-12-01 Date of Implementation: 2011-05-01 Older Standard (superseded by this standard): GB/T 11159-1989 Quoted Standard: GB 191-2000; GB 14048.1-2006; JB/T 9512-1999 Regulation (derived from): Announcement of Newly Approved National Standards No. 9, 2010 (No. 164 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the low pressure chamber and definitions of terms, conditions, technical requirements, test methods, inspection rules and signs, packaging and storage. This standard applies to electrical and electronic products and other products, parts and materials for low pressure test chamber. GB/T 11159-2010: Specifications for low air pressure test chambers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Specifications for low air pressure test chambers ICS 19.040 N61 National Standards of People's Republic of China Replacing GB/T 11159-1989 Low air pressure test chambers Issued on. 2010-12-01 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Conditions 2 5 2 Technical Requirements 6 Test Method 3 7 inspection provisions 4 8 signs, packaging, storage 4ForewordThe standard is "environmental testing equipment technology" series. The series of standards consists of the following standard components. --- GB/T 10586-2006 humid chamber technical conditions --- GB/T 10587-2006 salt spray test chambers --- GB/T 10588-2006 mildew test chambers --- GB/T 10589-2008 low temperature test chambers --- GB/T 10590-2006 high temperature/low air pressure test chambers --- GB/T 10591-2006 high temperature/low air pressure test chambers --- GB/T 10592-2008 high and low temperature test chambers --- GB/T 11158-2008 high temperature test chambers This standard replaces GB/T 11159-1989 "low pressure chamber and technical conditions." This standard and GB/T 11159-1989 main changes are as follows. a) increase the "Terms and Definitions" chapter; b) environmental conditions in expanding the scope of atmospheric pressure (see 4.1); c) increasing the chamber pressure 0.1kPa predetermined value a value (Table 1); d) increase the dielectric strength requirements (see 5.3.1). The standard proposed by China Machinery Industry Federation. This standard is under the jurisdiction of Machinery Industry Standardization Technical Committee laboratory instruments and equipment. This standard by the Chongqing Sida Test Equipment Co., Southern Jiangsu Wuxi Test Equipment Co., Ltd., Chengdu Sky Test Equipment Co., Ministry of Information Industry Institute of Electronics fifth, Hunan Institute of Metrology detection, mechanical Instrumentation Technology and Economy Institute is responsible for Drafted. The main drafters of this standard. Chen Yunsheng, Ni Yiming, Jin Xubin, Zousu Yang, Li Qing first, Feng Xiao L, Jinli Hui, Xiong Zhiming, Marin. This standard replaces the standards previously issued as follows. --- GB/T 11159-1989. Low air pressure test chambers1 ScopeThis standard specifies the low pressure chamber (hereinafter referred to as chamber) of the terms and definitions, conditions of use, technical requirements, test methods, inspection Rules and signs, packaging, storage. This standard applies to electrical and electronic products and other products, parts and materials for low-pressure test chamber.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 191-2000 Packaging - Pictorial signs (eqv ISO 780.1997) GB 14048.1-2006 Low-voltage switchgear and control equipment Part 1. General (modIEC 60947-1.2001) Determination of JB/T 9512-1999 climate chamber test equipment and sound power levels3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 Chamber testchamber Wherein a portion can be sealed to meet the specified test conditions of housing and space. 3.2 Pressure setpoint airpressuresetpoint With chamber control means sets a desired pressure values. 3.3 Pressure nominal value achievednominalvalue According to the test method requires a predetermined pressure value or need a pre-determined pressure value. 3.4 The actual pressure achievedairpressure After stabilization, the pressure chamber work space. 3.5 Pressure stability airpressurestabilization The work space pressure to a pressure set value and maintained within the tolerance range. 3.6 Workspace workingspace Test chamber capable of maintaining a predetermined condition within the specified tolerance parts. 3.7 Air pressure changing rate airpressurerateofchange Workspace measured two to the transition rate between the air pressure set to kPa/min units. 3.8 Pressure deviation airpressurevariation After stabilization, at any time interval, the difference between the highest and lowest values \u200b\u200bof the nominal value of its air pressure and air pressure. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11159-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 11159-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11159-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11159-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11159-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11159-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
