GB/T 11037-2009 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 11037-2009: Test method for strength and tightness of marine boiler and pressure vessel Status: Valid GB/T 11037: Historical versions
Basic dataStandard ID: GB/T 11037-2009 (GB/T11037-2009)Description (Translated English): Test method for strength and tightness of marine boiler and pressure vessel Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U41 Classification of International Standard: 47.020.20 Word Count Estimation: 6,613 Date of Issue: 2009-03-09 Date of Implementation: 2009-11-01 Older Standard (superseded by this standard): GB/T 11037-2000 Regulation (derived from): National Standard Approval Announcement 2009 No.2 (Total No.142) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the marine boiler and pressure vessel (hereinafter referred to as boilers and pressure vessels) and pressure parts, test procedures and test results assessment, strength and tightness testing requirements for accessories. This standard applies to the design pressure of not more than 9. 8MPa, medium is water and steam boilers, design pressure of not more than 6. 4MPa, the medium is water or air pressure vessel. GB/T 11037-2009: Test method for strength and tightness of marine boiler and pressure vessel---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test method for strength and tightness of marine boiler and pressure vessel ICS 47.020.20 U41 National Standards of People's Republic of China Replacing GB/T 11037-2000 Marine boiler and pressure vessel strength and Tightness test methods Posted 2009-03-09 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces 11037-2000 "marine auxiliary boiler and pressure vessel strength and tightness test method" GB/T . This standard compared with GB/T 11037-2000, the main changes are as follows. --- The standard name to "marine boilers and pressure vessels strength and tightness test methods"; --- Scope read. design pressure is less than 9.8MPa, medium is water and steam boilers; design pressure is less than 6.4MPa, Medium is water or air pressure vessel; --- Increased superheater, superheater header, test pressure superheater tubes and superheated steam valve requirements, test and refine the pressure vessel Test pressure requirements; --- Increasing the yield strength of the material of the test pressure requirements; --- To test medium temperature requirements of a sound and increased; --- The "demand" and "test conditions" two chapters into the "requirements" chapter. The standard proposed by China State Shipbuilding Corporation. This standard by the National Marine Machinery Standardization Technical Committee. This standard was drafted. Qingdao Marine Boiler Works, Ltd., Zhangjiagang sandbar Green Boiler Co., Ltd., China Shipbuilding Industry Integrated Technology Surgery Institute of Economic Research, China Classification Society Qingdao Branch. The main drafters of this standard. Qiu Yudong, Weihua Xing, Liu Yanling, Liu Guoliang, Su Zhengdong, Zhongchong Xin, Hu Guangfu, car sharp. This standard replaces the standards previously issued as follows. --- GB/T 11037-1989, GB/T 11037-2000. Marine boiler and pressure vessel strength and Tightness test methods1 ScopeThis standard specifies the strength of marine boiler and pressure vessel (hereinafter referred to as Boiler and Pressure Vessels) and pressure parts, accessories and tightness Test requirements, test procedures and test results evaluated. This standard applies to the design pressure is less than 9.8MPa, medium is water and steam boilers; design pressure is less than 6.4MPa, media Water or air pressure vessel.2 Requirements2.1 Test pressure The test pressure shall comply with the requirements in Table 1. Table 1 Test pressure No. Name Strength test (Made or assembled) Tightness test (Accessory after installation)2 superheater header4 Pressure Vessels(Air bottles under pressure to do the work Tightness test) 2.2 strength test 2.2.1 boilers, pressure vessels, economizer and superheater body strength test shall be a hydraulic test. 2.2.2 boilers, pressure vessels, economizer and superheater body should be assembled by qualified nondestructive testing and other testing without paint and laying The case of insulation, the strength test. Heat treatment required for the test pieces after heat treatment should strength test. 2.2.3 For steam, water cylinder and header, strength test can before drilling (command, control group well), but it should take over the welding, pipe and all kinds of accessories and short heat Performed after processing (when required). 2.2.4 The test pressure should not exceed the device material at the test temperature yield strength of 90%. 2.2.5 Test surroundings should be clean and tidy, the ambient temperature is not lower than 5 ℃. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 11037-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 11037-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 11037-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 11037-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 11037-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11037-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
