GB/T 11016.1-2009 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 11016.1-2009: Plastic or rubber insulated telephone cords -- Part 1: General
Status: Valid

GB/T 11016.1: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 11016.1-2009	189	Add to Cart	3 days	Plastic or rubber insulated telephone cords -- Part 1: General	Valid
GB/T 11016.1-1989	239	Add to Cart	2 days	Plastic or rubber insulated telephone cords--Part 1: General	Obsolete

Similar standards

GB/T 9330   GB/T 12706.1   GB/T 12528   GB/T 11017.1   GB/T 11016.4   GB/T 11016.2   

Basic data

Standard ID: GB/T 11016.1-2009 (GB/T11016.1-2009)
Description (Translated English): Plastic or rubber insulated telephone cords -- Part 1: General
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K13
Classification of International Standard: 29.060.20
Word Count Estimation: 8,855
Date of Issue: 2009-03-19
Date of Implementation: 2009-12-01
Older Standard (superseded by this standard): GB/T 11016.1-1989
Quoted Standard: GB/T 2900.10-2001; GB/T 3953-2009; GB/T 6995.2-2008; GB/T 11016.2-2009; GB/T 11016.3-2009; GB/T 11016.4-2009
Regulation (derived from): Announcement of Newly Approved National Standards No. 3, 2009 (No. 143 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the plastic or rubber insulated telephone cords product classifications, common technical requirements and test methods, inspection rules, packaging and signs. This section applies to the telephone base and the telephone connection or junction boxes and connecting the handle switch and plug with a plastic or rubber insulated telephone cords.

GB/T 11016.1-2009: Plastic or rubber insulated telephone cords -- Part 1: General

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastic or rubber insulated telephone cords Part 1. General ICS 29.060.20 K13 National Standards of People's Republic of China Replacing GB/T 11016.1-1989 Plastic or rubber insulated telephone cords Part 1. General requirements Posted 2009-03-19 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 11016 "plastic or rubber insulated telephone cords" is divided into four parts. --- Part 1. General requirements; --- Part 2. PVC insulated telephone cords; --- Part 3. Polypropylene insulated telephone cords; --- Part 4. Rubber insulated telephone cords. This section GB/T Part of 111,016. This Part replaces GB/T 11016.1-1989 "plastic or rubber insulated telephone cords general provisions." This section compared with the GB/T 11016.1-1989 The main changes are as follows. --- Increase the "Normative references" (1989 edition no; Chapter 2 of this section); --- According to GB/T 1.1-2000 requirements of the former version of the standard format to be modified. This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This part of the unit responsible for drafting. Shanghai Electric Cable Research Institute. Participated in the drafting of this section. Hai Saike force on Optical Cable Co., Ltd., Ningbo, a boat Investment Group Co., Ltd., Wenzhou Yaohua Electric Communications Limited. The main drafters of this section. Song Jie, Chen Jiande, Wang Qingsong, Xinxiu Dong, Ye Qinghua, Lu Xiang, Geely, Zou Ye Long, Meng Qingfeng, Gao Huan. This part of the standard replaces the previous editions are. --- GB/T 11016.1-1989. Plastic or rubber insulated telephone cords Part 1. General requirements

1 Scope

GB/T 11016 provisions of this part of the plastic or rubber insulated telephone cords Categories General technical requirements and test methods, Inspection rules, packaging and signs. This section applies to connect the telephone base and the telephone junction box and connected to the handle or switch and plug with plastic and rubber insulation Insulated telephone cords.

2 Normative references

The following documents contain provisions which, through reference GB/T 11016 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2900.10-2001 Electrotechnical terminology cable (idtIEC 6005 (461). 1984) GB/T 3953-2009 electrician round copper wire GB/T 6995.2-2008 wire and cable identification - Part 2. Standard colors GB/T 11016.2-2009 plastic or rubber insulated telephone cords - Part 2. PVC insulated telephone cords GB/T 11016.3-2009 plastic or rubber insulated telephone cords - Part 3. Polypropylene insulated telephone cords GB/T 11016.4-2009 plastic or rubber insulated telephone cords - Part 4. Rubber insulated telephone cords

3 Terms and Definitions

GB/T 2900.10-2001 established and the following terms and definitions apply to this standard. 3.1 Before the test conducted by a certain kind of cable specified by the manufacturer in the supply cable standard, to demonstrate the use of having a meet predetermined criteria Good performance. Type test done after a general no longer be repeated. However, the materials used in wire and cable, structure and process changes have affected When performance wire and cable, the test shall be repeated; or as otherwise specified in the product standard time, such as regular tests, should be required to also repeated Line test. 3.2 Drawn wire and cable manufacturer in accordance with the full batch manufacturing, and test specimens cut therefrom or elements of. 3.3 Factory test for all of the finished wire cable. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 11016.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 11016.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 11016.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 11016.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 11016.1-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 11016.1-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.