GB/T 10592-2023 English PDF

US$869.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 10592-2023: Specifications for high/low temperature testing chambers
Status: Valid

GB/T 10592: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 10592-2023	869	Add to Cart	7 days	Specifications for high/low temperature testing chambers	Valid
GB/T 10592-2008	599	Add to Cart	4 days	Specification for low/high temperature test chambers	Obsolete
GB/T 10592-1989	359	Add to Cart	3 days	Specification for low/high temperature test chambers	Obsolete

Similar standards

GB/T 903   GB/T 7962.2   JB/T 9329   GB/T 10586   GB/T 43861   

Basic data

Standard ID: GB/T 10592-2023 (GB/T10592-2023)
Description (Translated English): Specifications for high/low temperature testing chambers
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N04
Classification of International Standard: 19.040
Word Count Estimation: 45,481
Date of Issue: 2023-03-17
Date of Implementation: 2023-10-01
Older Standard (superseded by this standard): GB/T 10592-2008
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 10592-2023: Specifications for high/low temperature testing chambers

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS19:040 CCSN04 National Standards of People's Republic of China Replacing GB/T 10592-2008 High and low temperature test chamber technical conditions Released on 2023-03-17 2023-10-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 4 4:1 Product performance 4 4:2 Product structure and appearance requirements 5 4:3 Safety and environmental protection requirements 6 5 Conditions of use and installation6 5:1 Conditions of use 6 5:2 Installation conditions 7 6 Main inspection instruments and devices 7 6:1 Temperature measurement system 7 6:2 Surface thermometer 7 6:3 Anemometer 8 6:4 Sound level meter 8 6:5 Insulation resistance tester 8 6:6 Hipot tester 8 6:7 Electromagnetic Compatibility (EMC) Tester 8 6:8 Stopwatch 8 6:9 Steel tape measure 8 7 Inspection method 8 7:1 Inspection conditions 8 7:2 Temperature deviation inspection 8 7:3 Temperature fluctuation test 10 7:4 Temperature uniformity test 10 7:5 Temperature indication error test 11 7:6 Inspection of average temperature change rate 11 7:7 Inspection of the whole-process average temperature change rate 12 7:8 Linear rate of temperature change test 14 7:9 Inspection of the whole linear temperature change rate 15 7:10 Inspection of heating and cooling time 17 7:11 Temperature recovery time test 18 7:12 Temperature overshoot test 20 7:13 Temperature overshoot recovery time test 21 7:14 Wind speed inspection 23 7:15 Noise inspection 23 7:16 Thermal insulation performance of test chamber 28 7:17 Appearance quality inspection 28 7:18 Door sealing performance inspection 28 7:19 Inspection of box dimensions in the test box 28 7:20 Test box volume inspection 30 7:21 Safety and environmental protection inspection 32 8 Inspection rules 33 8:1 Inspection classification 33 8:2 Type inspection 33 8:3 Factory inspection 34 8:4 Judgment rules 34 9 Logo, instruction manual 34 9:1 Flags 34 9:2 Instruction Manual 35 10 Packaging, transportation, storage 35 10:1 Packaging 35 10:2 Transport 35 10:3 Storage 35 Appendix A (Informative) Suspicious data identification method 36 Reference 38

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document is one of the series of standards "Technical Conditions for Environmental Test Chambers", which consists of the following documents: ---GB/T 10586-2006 Technical conditions for damp heat test chamber; ---GB/T 10587-2006 Salt Spray Test Chamber Technical Conditions; ---GB/T 10588-2006 Technical conditions for mold growth test chamber; ---GB/T 10589-2008 Low temperature test chamber technical conditions; ---GB/T 10590-2006 High and low temperature/low pressure test chamber technical conditions; ---GB/T 10591-2006 High temperature/low pressure test chamber technical conditions; ---GB/T 11158-2008 High temperature test chamber technical conditions; ---GB/T 11159-2010 Technical conditions for low pressure test chambers: This document replaces GB/T 10592-2008 "Technical Conditions for High and Low Temperature Test Chambers": In addition to rectification and editorial changes, the main technical changes are as follows: a) Added "temperature shock test" (see Chapter 1); b) Deleted "actual temperature" (see 3:3 of the:2008 edition), "temperature gradient" (see 3:7 of the:2008 edition), "temperature of the working space The terms and definitions of "deviation" (see 3:9 of the:2008 edition), changed the definition of "temperature fluctuation" (see 3:8,:2008 edition 3:5), change "limit temperature" (see 3:10 of the:2008 edition) to "extreme temperature" (see 3:5), change "temperature change rate" (see 3:8) of the:2008 edition is divided into "average temperature change rate" (see 3:11) and "linear temperature change rate" (see 3:13), adding "Temperature deviation" (see 3:7), "temperature uniformity" (see 3:9), "temperature indication error" (see 3:10), "full average temperature change speed rate" (see 3:12), "full linear temperature change rate" (see 3:14), "heating and cooling time" (see 3:15), "temperature recovery time" (see 3:16), "temperature overshoot" (see 3:17), "temperature overshoot" (see 3:18), "temperature overshoot recovery time" (see 3:19), "temperature The terms and definitions of "degree change test profile" (see 3:20); c) Changed "Table 1 Test Chamber Performance Items and Requirements" (see 4:1, Table 1 of the:2008 edition), and deleted "Temperature Gradient" (see:2008 No: 3 in Table 1 of the:2008 edition, "the difference between the temperature of the inner wall of the working room and the temperature of the working space" (see No: 5 in Table 1 of the:2008 edition), add "Temperature Deviation", "Temperature Uniformity", "Temperature Indication Error", "Full Average Temperature Change Rate", "Full Linear Temperature Change Rate" rate", "temperature rise and fall time", "temperature recovery time", "temperature overshoot amount", "temperature overshoot recovery time" and other items and requirements (see 4:1 Table 1), increased the size of the test chamber (see 4:2:15), the requirements for the volume of the test chamber (see 4:2:16), added the electromagnetic compatibility Content (EMC) safety requirements (see 4:3:4) and refrigerant environmental protection requirements (see 4:3:8); d) Changed "Conditions of Use" (see Chapter 4 of the:2008 edition) to "Conditions of Use and Installation" (see Chapter 5), and changed the conditions of water supply (See 5:1:3, 4:3 of the:2008 edition), adding installation conditions (see 5:2); e) Added "sound level meter" (see 6:4), "insulation resistance tester" (see 6:5), "voltage withstand tester" (see 6:6), "electromagnetic compatibility (EMC) tester" (see 6:7), "stopwatch" (see 6:8), "steel tape measure" (see 6:9) and requirements for instruments; f) Changed the test conditions (see 7:1, 6:2 of the:2008 edition), subdivided the test method of "temperature change rate", added "full process "Average temperature change rate test" (see 7:7), added 2min, 3min, 4min linear temperature change rate (see 7:8:1), added Added "full linear temperature change rate test" (see 7:9), added "temperature indication error" (see 7:5), "heating and cooling time" (see 7:10), "temperature recovery time" (see 7:11), "temperature overshoot" (see 7:12), "temperature overshoot recovery time" (see 7:13) The inspection method, "wind speed inspection is divided into single-point measurement and multi-point measurement" (see 7:14, 6:6 of the:2008 edition), noise inspection is divided into Single-point measurement and multi-point measurement (see 7:15, 6:11 of the:2008 edition), added "inspection of test box size" (see 7:19), "Test box inner box volume inspection" (see 7:20), "electromagnetic compatibility (EMC) test" (see 7:21:4); g) Changed "Table 4 Inspection Items, Technical Requirements and Inspection Methods" (see 9:1 Table 4, 7:2 Table 2 of the:2008 edition); h) Change "labelling, packaging, storage" (see Chapter 8 of the:2008 edition) to "labeling, instruction manual" (see Chapter 9) and "packaging, Transport and storage" (see Chapter 10), the requirements for "Instructions for Use" (see 9:2) and "Transportation" (see 10:2) have been added: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Laboratory Instruments and Equipment Standardization Technical Committee (SAC/TC526): This document is drafted by: Guangzhou Wusuo Environmental Instrument Co:, Ltd:, Machinery Industry Instrumentation Comprehensive Technology and Economic Research Institute, Industry and Information Technology The Fifth Research Institute of Electronics of the Ministry of Information and Chemical Technology, Jiangsu Topmilo Environmental Test Equipment Co:, Ltd:, Hangzhou Xuezhong Carbon Constant Temperature Technology Co:, Ltd:, Shanghai Municipal Planning Quantitative Testing Technology Research Institute, Guangdong Product Quality Supervision and Inspection Research Institute, Anhui Provincial Institute of Metrology, Zhongke Sailing (Beijing) Technology Co:, Ltd: Company, Shanghai ASPEC Environmental Equipment Co:, Ltd:, CTI Testing and Certification Group Co:, Ltd:, Hunan Provincial Institute of Metrology and Testing, Wuxi Soyate Test Equipment Co:, Ltd:, Dongguan Shengwei Electromechanical Equipment Technology Co:, Ltd:, Ningbo Institute of Metrology and Testing (Ningbo New Material Inspection Inspection and Testing Center), Guangzhou Energy Testing and Research Institute, Yiyang Metrology and Testing Institute, Hengyang Metrology and Testing Center, Chongqing Artek Technology Co:, Ltd: Co:, Ltd:, Hangzhou Wolei Intelligent Technology Co:, Ltd:, China Jiliang University: The main drafters of this document: Xie Chenhao, Zhang Guiling, Wang Kai, Xu Yueming, Jiang Zhiwei, Zhang Yanjun, Xie Kaifeng, Ling Yancui, Tang Lihua, Huang Lijun, Liu Jiayong, Feng Hua, Wang Meijun, Cai Jin, Zou Yi, Xiong Zhiming, Zhou Zhongming, Zeng Xiangming, Wang Peijun, Liu Yizi, Yu Xudong, Luo Xiongfeng, Xie Shaojun, Guo Bin, Shi Zicheng, Huang Yu: The release status of previous versions of this document and the documents it replaces are as follows: ---First published as GB/T 10592-1989 in 1989; ---The first revision in:2008; --- This is the second revision:

Introduction

Environmental test equipment is the general term for test chambers that simulate climate and environmental conditions, including high and low temperature, damp heat, low air pressure and other test chambers: In order to protect To prove that the technical regulations such as product classification, performance indicators, and inspection methods of test chambers have a basis for common compliance in production and use, my country has established The standard system of test chamber technical conditions mainly includes the following documents: ---GB/T 10586-2006 Technical conditions for damp heat test chamber: The purpose is to provide quality assurance inspection for the damp heat test chamber in accordance with: ---GB/T 10587-2006 Salt Spray Test Chamber Technical Conditions: The purpose is to provide quality assurance inspection for salt spray test chamber in accordance with: ---GB/T 10588-2006 Specifications for mold growth test chamber: The purpose is to provide quality assurance inspection for mold growth test chamber in accordance with: ---GB/T 10589-2008 Low temperature test chamber technical conditions: The purpose is to provide quality assurance inspection for low temperature test chamber in accordance with: ---GB/T 10590-2006 High and low temperature/low pressure test chamber technical conditions: The purpose is to provide high and low temperature/low pressure test chambers The basis for quality assurance inspection: ---GB/T 10591-2006 High temperature/low pressure test chamber technical conditions: The purpose is to provide quality for high temperature/low pressure test chambers basis for quality assurance testing: basis: ---GB/T 11158-2008 High temperature test chamber technical conditions: The purpose is to provide quality assurance inspection for high temperature test chambers in accordance with: ---GB/T 11159-2010 Technical conditions for low pressure test chambers: Purpose is to provide quality assurance inspection for low pressure test chambers basis: The high and low temperature test chamber is a test equipment for simulating high and low temperature climate conditions: It is widely used in high temperature testing of various products, parts and materials: Or low temperature, high and low temperature cycle and environmental tests of temperature shock: This document considers the standardization of temperature technical indicators and the scientificity of inspection methods from the aspects of manufacture, use and inspection of high and low temperature test chambers: and the accuracy of test results, coordinated with GB/T 5170 "Environmental Test Equipment Test Method" (all parts), JJF1101 "Environmental Test Specifications for Calibration of Equipment Temperature and Humidity Parameters" and JJF1270 "Calibration Specifications for Temperature, Humidity and Vibration Comprehensive Environmental Test System", The relationship between requirements and inspection methods, the definition, requirements and corresponding inspection methods of relevant temperature technical indicators are given: When evaluating and selecting high and low temperature test chambers, users should comprehensively consider the inner size of the test chamber, the volume of the test chamber, the working temperature range, and the temperature range: Deviation, temperature fluctuation, temperature uniformity and temperature change rate and other technical indicators to meet the required high and low temperature test conditions: The design and manufacture of the test chamber should be in accordance with GB/T 15706-2012 "General Rules for Mechanical Safety Design Risk Assessment and Risk Reduction" Small", fully consider the mechanical safety of the test box to ensure the personal safety of users: High and low temperature test chamber technical conditions

1 Scope

This document specifies the technical requirements, conditions of use and installation, and main inspection instruments related to high and low temperature test chambers (hereinafter referred to as "test chambers"): Devices and devices, inspection methods, inspection rules, signs, instructions for use, packaging, transportation, storage, etc: This document applies to high or low temperature tests for products, components, and materials in the process of research and development, production, and inspection, as well as high and low temperature tests: Test chamber for cycle test and temperature shock test: Similar temperature test chambers shall be implemented by reference:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 191 Packaging, storage and transportation icon marks GB/T 3785:1 Electroacoustic sound level meters Part 1: Specifications GB/T 5226:1-2019 Electrical Safety of Machinery and Electrical Equipment Part 1: General Specifications GB 8624 Classification of combustion behavior of building materials and products GB/T 9969 General Rules for Instructions for Use of Industrial Products GB/T 14048:1-2012 Low-voltage switchgear and controlgear Part 1: General GB/T 15706-2012 Risk Assessment and Risk Reduction of Machinery Safety Design General Principles GB/T 21067-2007 General immunity requirements for electromagnetic compatibility of industrial machinery and electrical equipment GB 23313 Electromagnetic Compatibility Emission Limits for Industrial Machinery and Electrical Equipment GB/T 50050 Code for Design of Industrial Circulating Cooling Water Treatment GB 50209 Code for acceptance of construction quality of building ground engineering JB/T 9512-2018 Determination of sound power level of emission noise of climate environment test equipment by sound pressure method JB/T 12571-2018 Emission noise working position and other designated positions emission sound pressure level of climate environment test equipment determination

3 Terms and Definitions

The following terms and definitions apply to this document: 3:1 A closed box or space, some of which can meet the specified high and low temperature test conditions: 3:2 Test chamber volume testingchambervolume The actual volume of the space defined by the inner wall of the test chamber: [Source: GB/T 5170:1-2016, 3:2:1, modified] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 10592-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 10592-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 10592-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 10592-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 10592-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 10592-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.